eChapters

1. Potato

Scientific name: Solanum tuberosum L.

Family: Solanaceae

Origin: South America

Chromosome No.: 2n = 4x = 48

Introduction

Potato is one of the four major food crops of the world and is also a very popular vegetable crop. It is extensively cultivated in China, Russian Federation, Ukarine, Poland, Ireland, Great Britain, Germany, Netherlands, France, Spain, South America, India and USA. Potato was brought from Peru to Spain by the Spaniards in 1565 when it was widely grown in Spain and Italy. They were probably brought to England about 1586 by Sir Francis Drake. Potato was introduced in India in early 17^th century probably by the Portuguese. Now it is one of the principal cash crops of India.

Importance and use

• Potato is the fourth major food crops of the world after rice, wheat and maize.
• Being a major source of carbohydrate it is often used as a substitute for cereals.
• It is one of the major vegetable crops of the world and is grown in almost every country.
• In India, it is considered as a staple vegetable and used either alone or mixed with other vegetables.
• Potato is used as vegetable in various forms such as, boiled, mashed, baked, fried and cooked in sambar and different curries of vegetable, fish and meat.
• Potato is processed into different commercially used dehydrated, canned and fried products like, shredded potato, sliced potato, chips, flakes, French fries, finger chips, granules, disc, cubes, flour, etc.
• It is used for several industrial purposes such as production of starch, alcohol, dextrin, glucose, etc.
• Potato starch is a large grained starch and contains 25 % amylase and 73 % amylopectin and high phosphate content.

Potato

Potato, Solanum tuberosum L. under the family Solanaceae (Chromosome No. 2n = 4x = 48) is the most important non-grain food crop in the world, ranking 3rd in terms of total production with over 381 million tonnes per year in (FAOSTAT, 2017), after rice and wheat. It is grown in 150 countries spread across both temperate and tropical regions and at elevations from sea level to 4,000 m. It is extensively cultivated in China, Russian Federation, Ukarine, Poland, Ireland, Great Britain, Germany, Netherlands, France, Spain, South America, India and USA. Potato was brought from Peru to Spain by the Spaniards in 1565 when it was widely grown in Spain and Italy. They were probably brought to England in 1586 by Sir Francis Drake. Potato was introduced in India in early 17^th century probably by the Portuguese. Now it is one of the principal cash crops of India.

The crop

The subsection Potato is distinguished from all other subsections within the genus Solanum by “true potatoes whose tubers are borne on underground stolons, which are true stems, not roots”. The series tuberosa is characterised by “imparipinnate or simple leaves, forked peduncle, rotate to pentagonal corolla and round berries”.

The species S.tuberosum is characterised by “pedicel articulation placed in the middle third, short calyx lobes arranged regularly, leaves often slightly arched, leaflets always ovate to lanceolate, about twice as long as broad, tubers with well marked dormancy period”

Potato is an annual herbaceous plant and growth habit varies between and within species. The plant has a rosette or semi-rosette habit. The stem is erect in the early stage but becomes spreading and prostrate later on. The leaves are compound and alternate, irregularly odd pinnate. The tuber is an enlarged portion of an underground stem or stolon. Tuber eyes are the buds from which next season’s growth will emerge. Eyes are concentrated near the apical end of the tuber, with fewer near the stolon or basal end. Eye number and distribution are characteristic of the variety.

Potato is mainly propagated vegetatively by means of tubers and sometimes by botanical seeds, i.e., true potato seeds. Potato has a terminal inflorescence consisting of 1-30 (but usually 7-15) flowers, depending on the cultivar. The five petals give the open flower a star shape. A flower also has a pistil that generally protrudes above a cluster of five large, bright yellow anthers. The corolla colour varies from white to complex range of blue, red and purple. Flowers are self-pollinated but also cross pollination take place by insect. Seeds are produced in the fruit which is botanically called berry. Potato fruits, stems and leaves contain glycoalkaloids, the toxic compounds, of which the most prevalent are solanine and chaconine.

India ranks ___________ in area and production of vegetables in the world.

A. First           B. Second

C. Third         D. Fourth

Barleria L. (Acanthaceae) is a pantropical genus of herbs and shrubs comprising about 300 species, occurring mainly in Africa and Asia. In India, the genus is represented by about 32 species of which 24 are endemic to India.  About 80 % of the species are found in Peninsular India. Many species of Barleria are of ornamental value and can be grown for their foliage and showy colorful flowers. There are certain indigenous species which show good growth performance in cultivation and have economic importance as ornamentals. Moreover, some species fall under IUCN categories of threatened plants which need immediate attention for their conservation. Considering the horticultural importance especially in landscape gardening and rarity of Barlerias, various species found in India are collected and cultivated through various methods in the Botanical Garden of Shivaji University, Kolhapur.

Facilities required for propagating many plant species by seed, cuttings, or grafting and budding include two basic units namely a structure with temperature control and ample light such as a greenhouse or hot bed where seeds can be germinated or cuttings rooted. The second unit is a structure into which the young tender plants can be moved for hardening preparatory to transplanting and cold frames or lath houses are useful for this purpose.Greenhouses: There are different types of greenhouse namely low cost greenhouse and commercial greenhouses. In all polyhouses/ greenhouses means of providing air movement and air exchange is necessary to aid in controlling temperature and humidity It is best, if possible, to have in the greenhouse heating and self-opening ventilators and evaporative cooling systems. Plastic greenhouses covered with various types of plastic film have become very popular among nursery men.

i. SHIELD OR ‘T BUDDING

Materials and equipments- Budding knife, tying material and petridis.

Procedure

Operations on the stock- Select healthy, uniform stock plants of about a lead pencil thickeness and about one to one and half years of age. Remove the thorns (if any) and side branches up to a height of 20 to 25 cm from the soil surface. Select a spot at height of about 15 to 20 cm from the soil surface in between two internodes, which is smooth, other than the southern aspect. With the help of a sharp knife make a horizontal cut of about 1.25 to 1.80 cm in length, deep enough to cut bark only. Starting from the centre of the horizontal cut make a vertical cut, deep enough to cut the bark only of about 2.5 to 3.5 cm long making the shape of english letter ’T’. Open the flaps with the help of knife blade or the back of the budding knife.

Purpose-Multiplication of plants by cutting includes stem, root and leaf cuttings. The stem cuttings are of four different types i.e. hard, semi hard, soft wood and herbaceous wood cutting consist in producing new individuals after the piece of stem has been detached from the mother plant and planted in conditions suitable for regeneration to the missing organs. Stem cutting have to develop a new root system as they already have buds to give rise to shoots. Many cells of the cutting are capable of becoming meristematic and thus are able to produce new roots. The success in the stem cutting multiplication depends upon factors such as condition of the mother plants, part of the tree from where the cuttings are made, time of the year, care while planting and after care. Cuttings can be made during monsoon (July-Sept.) and spring (Feb. -March) season when active cell division is taking place.

Purpose-The term ‘Grafting’ includes all forms of grafting and budding. It is the art of joining the part of together in such a manner that they will unite and continue their growth as one plant. A grafted plant consist of two parts a rootstock, also known as understock or stock, and a scion. The part of the graft combination which is to become the upper portion or top and performs the function of flowers production and fruits is known as scion and the part which is lower portion or root which performs the function of fixing itself in the soil, absorbs moisture and nutrient from the soil is known as rootstock.

When the scion part is a small piece of bark containing only one bud the operation is termed as budding, but when the scion part is a branch containing more than one bud, the operation is termed as grafting.

Purpose: Layering includes several forms of ground and aerial layering (goottie). When rooting is encouraged on the aerial part of a plant after wounding it is known as air layering or goottie or morcottage. When branches running parallel to ground are utilized, then the method is known as ground layering. Layering is the development of root on a stem while it is still attached to the mother plant. The root formation on the stem is stimulated by removing a ring of bark or by making a notch which cause an interruption in the downward movement of carbohydrates and auxins from the leaves and growing shoot tips. The materials accumulate near the points of treatment and helps in rooting. Root formation depends upon continuous moisture supply, good aeration and moderate temperature around the rooting zone. For the same reason the best result are obtained by these methods during monsoon month (July-Sept.) and spring (Feb. -March) from branches 1 to 2 years of age.

Veneer grafting

It has one striking advantage in using the detached scion sticks for propagation, i.e. the shoot of the mother plant which is to be multiplied can be cut away from the mother plant and taken to the seedling growing in the nursery for grafting. Proper selection of scion is very important for the success of this method. The scion stick ought to be 3 to 4 months old and with some activated bud, either auxiliary or terminal. This is secured by defoliating the scion shoot about a week before the actual operation

This method can be practiced on seedling stocks grown in pots or nursery beds. A slanting cut about 5cm long on one side of scion stock, is given and the bark along with wood is removed, giving an oblique cut. Now a slanting cut on one side of the scion is made, which will just fit with the notch of the stock. The scion is then placed in position in such a way that the cambium rings of both stock and scion come in close contact. It is then wrapped tightly with 1.5cm wide tape of 200-300 gauge alkathene film keeping the terminal ends free. When the scion begins to grow at the top, (after about 3 weeks) the upper part of the stock is removed, thus forcing the buds to grow more rapidly. The plastic wrap is removed after 2-3 months.

The success is more or less the same in the entire scion (2.5 to 10.50 cm in length) but the growth of scion is always more when bigger scions are used.

Media for plant growth and seed germination has great significance in nursery business. It is the basic need of the propagation industry. The material for rooting and growing media may be used either alone or incorporated with one or more products in combination. The materials used for rooting media may be naturally occurring or may be manufactured artificially.

Characteristics of an ideal rooting medium: These are as follows.

1. The medium must be sufficiently firm and dense to hold the cuttings or seeds in place during rooting or germination.
2. It must retain sufficient water and air, allowing sufficient drainage.
3. It should be highly decomposed and stable.
4. It must be free from weed seeds, insect pests and diseases.
5. Acidity or alkalinity should be the optimum for different species.
6. Its volume must be fairly constant, when either wet or dry.
7. It must be capable of being sterilized.

Abstract

Propagation in vitro using shoot tips / axillary buds has been applied successfully for production of  clonal apple rootstock  Malling 7 of EMLA series. For surface sterilization, HgCl₂ was found to be a good disinfectant as compared to sodium hypochlorite. Shoot tips were established best in MS medium supplemented with 2 mg/l  BA, 0.5 mg/l GA₃ and  0.1 mg/l IBA. Antioxidants were added to overcome phenol exudation. Shoot multiplication was influenced by cytokinin type and concentration. Of the cytokinins tested, BA (0.5 mg/l) was found superior to kinetin. Addition of phloroglucinol improved multiplication rate and shoot growth. Among the auxins tested, IBA was found better and roots were readily induced with 1 mg/l IBA. 90-95 per cent plantlets were established successfully in peat containing pots as well as in the field.

Plant propagation by means of seed is called ________ propagation.

A. Sexual          B. Parthenocarpy

C. Asexual        D. Apomixis

The woody perennial shrubs have been the integral part of the traditional agro forestry system in arid region since ancient times. Inhabitants of the region rely on these species for food, fodder, fuel wood and other day-today requirements since long. Among woody perennials arid shrubs also have a major role in stabilization of drifting sands in the arid ecosystem. Out of about 682 species of Indian arid Zone (Bhandari, 1990), shrubs constitute 70% of the total flora in the Indian desert, yet they cover over 70-80% of desert landscape. Thus shrubs are less in variety, they are ecologically more successful biotypes in the desert environment.

The propagation of plants has been a fundamental occupation of mankind since civilization begins. Agriculture started some 10,000 years back when ancient people learned plants and grow kind of plants that fulfilled nutritional needs for themselves and their animals (Hartman et al., 1981). As civilization advanced, people added to the variety of plants cultivating not only for additional food crops but also those that provided fibres, medicine, recreational opportunities and beauty. From the great diversity and variation in plant life, it has been possible to select kinds of plants particularly useful to the welfare of humans and their animals. Bio-diversity has attracted the world wide attention because of growing awareness of its importance on the one hand, and the anticipated awareness depletion on the other. About 20 per cent of all species are expected to be lost within 30 years and 50 per cent or more by the end of 21st Century (Myers, 1993). India is one of the 12 mega-diversity countries globally recognized for its rich diversity, since its geographic position extends from sea level to the highest mountain ranges in the world.

Propagation

Definition: Multiplication of plant is termed as propagation.

Types of propagation

There are mainly two types of propagation

1. Sexual propagation
2. Asexual propagation

Seed spices, an important group of horticultural crops, are defined as vegetable products or mixture thereof, free from extraneous matter, primarily used for flavouring, seasoning and imparting aroma of foods item and beverages. Besides food industry, the seed spices have medicinal properties and thus are used in various pharmaceutical preparations and cosmetics (Malhotra and Vashishtha, 2008).  India is known as the home of spices and produces a wide variety of seed spices- coriander, cumin, fennel, fenugreek, ajowan, dill, nigella, celery, anise and caraway. Over the years a good number of high yielding varieties have been developed under AICRP on Spices of ICAR by SAU’s and National Research Centre on Seed Spices. India enjoys the status of largest producer of seed spices in the world but the productivity in the country is very low and is 25-30 % of the total potential of the crop varieties.

Abstract

The studies were conducted during the years 2002 and 2003, to standardize the best method and time for summer budding in walnut. Four methods of summer budding viz. chip, annular, patch and shield were performed at 10 days interval from 15th May to 24th July. The results revealed that among the four methods of summer budding, chip budding was found to be highly superior to other methods of budding and gave 92% bud take success on 25th May and 87 per cent on 15th May also. Annular budding performed on 14th June was found next superior method and time of budding for walnut propagation when it resulted in 81% bud take success. Chip budded plants attained maximum height and radial growth as compared to annular and patch budded plants. The period from mid of May to first week of June was considered as optimum time for chip budding and mid June to end of June for annular and patch budding for walnut propagation under mid hill conditions of North-western Himalayas.

2.1 INTRODUCTION

Several propagation structures are helpful in propagation of horticultural crops. These structures are helpful for seed germination, rooting of cuttings, layering, grafting etc. and other hardening operations. The structures which facilitate propagation of plants are called propagation structures. Propagation structures are required for propagating plants by seed, cuttings and grafting.2.2

GREENHOUSE

Greenhouse is a structure covered with glass or polythene for protection against adverse climatic conditions as well as to provide optimum environment for growth of the plants. Greenhouse has been used long back by horticulturists as a means of forcing rapid growth of plants and extending the growing season particularly in colder areas. Plants are grown or cuttings are rooted in a greenhouse when the atmospheric condition does not permit for raising them in outdoor conditions. Modern greenhouses are equipped with regulatory mechanisms for controlling temperature, light intensity, air, humidity etc. Plants in green house are grown in the ground bed or bench type raised beds. The size of the greenhouses and dimensions of beds vary according to the need of propagators. Glass covered greenhouses are expensive but they have long life. However, for short-term benefits, plastic covered greenhouses can also be made. Plastic covered greenhouses are lighter than glass covered ones but there is increase in humidity is such houses, especially in winters, which results in undesirable water drops on the plants. It can however be overcome by making adequate ventilation. Polyvinyl chloride (PVC) has also been used in construction of greenhouses but it tends to darken pre-maturely in sunlight. In India, construction of temporarily low-cost poly houses is in fashion for raising nursery of fruit plant in off-season. Such low-cost greenhouses are constructed either on wood or metal framework and are covered with polyethylene sheet of 0.10 to 0.15mm thickness, which is resistant to ultra-violet rays. These houses are equipped with thermostat, cooler or an air conditioner or humidifier etc for rigid control on temperature and humidity. Greenhouses made from fibre glass sheet are more durable than the polythene houses, but are quite expensive. In greenhouses, two types of beds are used for raising seedlings. In greenhouses, the beds may either be prepared on ground itself or raised beds or bench type beds are used. Greenhouse structures vary from elementary home constructed to elaborate commercial installations.

1. DEFINITIONS

Propagation : Propagation of plants may be defined as the controlled reproduction of plants by man to perpetuate selected individual or groups of individual plants which have specific value to him or it is the perpetuation of plants as independent units by means of seeds, bulbs, layers, cuttings, or grafts.

• Seed: A seed has been defined as a young plant packed ready to start growing when required.
• Apomixis: Development of seeds without the complete sexual process is known as apomixes and seed produced in this manner is called apomictic seeds.
• Seed dormancy: The embryo of the seed remains in inactive stage from the time of its development to the time it germinates. This failure of the embryo is termed as dormancy of the seed.
• After-ripening: Some seeds germinate fully when freshly harvested, but they germinate after a period of dry storage. The change taking place in such seeds are known as after- ripening.
• Embryo dormancy: Conditions existing within the embryo.
• After-ripening dormancy: Seeds fail to germinate when freshly harvested, but they germinate after a period of dry storage. Such seeds are known as after-ripening dormant seeds. This is due to the physiological changes taking place in embryo.