eChapters

The International movement of seed takes place for (i) germplasm for R&D purposes, (ii) experimental lines and hybrids for screening purposes, (iii) basic seed for multiplication purposes, and (iv) commercial varieties and hybrids for marketing (Ranganathan, 2019). Vegetable seed import and export for research purposes is handled by National Bureau of Plant Genetic Resources (NBPGR), New Delhi where the importing research organization in India first gets an import permit from NBPGR following due procedures as available on NBPGR website (www.nbpgr.ernet.in). Once the importing research organization, like ICAR institutes, state agricultural universities, private seed companies, etc get the import permit which specifies the list of material to be imported and the seed source, the import permit is sent to the research seed supplying agency who in turn attaches a phytosanitary certificate along with the copy of the import permit to the consignment and sends the same to NBPGR. NBPGR retains part of seed and releases the seed to the indenter after necessary quarantine test and charging quarantine fee. The importing organization is expected to give a brief report about the material to the NBPGR after its evaluation at its farm/lab.

The bulk seed import (vegetable seed for commercial purposes) is handled by Directorate of Plant Protection, Quarantine and Storage, Faridabad, Haryana (www.ppqs.gov.in) with no condition of testing by government system. This exemption of testing is not available for field crop seed. It needs to be clarified that the bulk vegetable seed import has been simplified as per New Seed Policy-1988 which has put the vegetable seeds among others under OGL (open general license) and this provision facilitates the vegetable seed in bulk and the private seed companies have taken advantage of this provision. The Indian private seed companies are importing large quantities of seed of cauliflower, cabbage, broccoli, radish, carrot, beet root and even vegetable peas. The bulk vegetable seed import for commercial purposes is done as per following procedure.

1. SEED INDUSTRY BEFORE INDEPENDENCE

The Royal Commission on Agriculture (RCA) constituted in 1925 suggested the following for seed improvement

There should be a separate organization within agriculture departments to deal with seed distribution and seed testing.

The seed distribution enterprise should be self-sustaining.

Seed distribution should be organized through co-operatives, other associations, seed merchants (whenever they are available), through seed agents, as well as through agricultural department staff and any other agency which could be considered suitable.

Seed merchants of proven enterprise should be given every encouragement.

Inventory management system is a computer based system for creating work orders at a processing plant, tracking inventory levels in the go downs, , sales and seed movement out of the processing plant. These modern systems avoid book maintenance and save lots of space. It will also tool for avoiding overstock or delay in movement of seed material for packaging. In most of the processing plants SAP is the most popular inventory management tool which is more efficient than others. SAP is basically a tool of enterprise resource planning which help in material management. The customised software can be used very effectively in a processing plant for the following operations.

Introduction

Development of improved crop varieties is vital for sustained increase in agriculture production and productivity. Timely supply of quality seed is equally significant since the contribution of quality seed alone is estimated to be 15-20 per cent to total crop production. Seed quality attains more significance in view of emerging biotic and abiotic stresses, issues related to quality and phytosanitary measures, competition in domestic and international markets and emerging food needs. Measures of seed legislation with respect to quantity and quality were initiated in the country by establishment of National Seed Corporation during 1963 under Ministry of Agriculture. The seed sector in India during the period was dominated by the Public sector. The National Seed Corporation was the Central Body to produce seeds of superior dwarf varieties in rice, wheat, and superior hybrids in maize, pearl millet and sorghum. This was followed by various seed legislations enacted by Government of India. Further, AICRP-NSP (Crops), popularly known as National Seed Project was launched during 1979-80. The NSP-Project came into operation in three major phases and continues to produce breeder seed to cater the needs of the Indian farmers. The project resulted in achieving breeder seed production surpassing the indents in all major crops. The seed programme of the country was further strengthened with NSP II (World Bank) Project starting in 1989-90, which not only supported the ICAR and SAUs, but also Department of Agriculture, Seeds Corporations, Seed Certification Agencies and Private Seed Industries to a great extent in production, processing and in providing quality seeds to the country.

The basic aim of seed legislation and its subsequent enforcement is to regulate the quality of seeds sold to farmers. So long as Agriculture remains tradition and static, there is little justification for regulating seed quality. However with technological advancement and the systematic application of science to Agriculture, it becomes compulsory to regulate the quality of seeds through seed legislation and its subsequent enforcement to ensure that seed buyers are not made to run undue risks.

TYPES OF SEED LEGISLATION

Seed legislation can be broadly divided into two groups.

1.    Sanctioning legislation

2.    Control legislation

Sanctioning Legislation

Which authorizes, establishes or otherwise legally sanctions such activities as formation/establishment of advisory bodies, seed certification agencies, seed testing Labouratories, foundation and certified seed programmes, recognition of seed certification agencies of foreign countries, appellate authority etc.

Seed marketing is one of the most vital components of seed technology. Broadly, it includes such activities as production, processing, storage, quality control and marketing of seeds. In the narrow sense, however seed marketing refers to the actual acquisition and selling of packed seeds, intermediate storage, delivery and sales promotional activities. Seed marketing comprises the following:

1. Demand forecasts (assessment of effective demand)
2. Marketing structure
3. Arrangements for storage of seeds
4. Sales promotional activities
5. Post-sales service
6. Economics of seed production and seed pricing

1. DEFINITION

Seed marketing is the one of the most vital components of seed technology. On it depends the size and scope of the seed industry. Broadly it includes such activities as production, processing, storage, quality control and marketing of seeds.

Seed marketing refers to the actual acquisition and selling of packed seeds, intermediate storage, delivery and sales promotional activities.

1. SEED MATURITY

Harvesting should be done after the attainment of physiological maturity, when the seeds reached complete maturity to avoid harvesting of immature and ill-filled seeds.

1.1. Physiological maturity

It is the stage of accumulation of maximum drymatter within the seeds. It is expressed by maximum seed weight, germination and vigour potential. The moisture content of the seed at this stage is around 25-30% depending up on the species.

1.2. Harvestable maturity

The physiological maturity is represented to a seed and this maturity will not be the same for all the seeds of a single plant / population, due to continuous differential flowering habit. Hence, the stage of attainment of physiological maturity by 80% of the population is considered as the harvestable maturity stage. The moisture content of the seed will be lesser than the physiological maturity stage (18-20%).

1. SEED MOISTURE

Seed moisture is one of the most important deciding factors of seed viability and quality during storage. Hence, determination of seed moisture content and drying to the safe moisture content is utmost important before transit and storage.

According to ISTA (1985), moisture content of the sample is defined as that loss of weight when it is dried in accordance with the rules or the amount of water collected when it is distilled. It is expressed as percentage of the original weight of sample (wet basis).

1.1. Principle

Moisture present in the seed is removed completely as much as possible without oxidation or decomposition or loss in other volatile substances by applying heat. The weight loss due to drying is estimated and the moisture content is calculated.

The seed moisture content is the amount of water present in the seed. It is generally expressed in percentage of dry and wet seed weight. It is the loss in weight of the original sample when it is dried. High moisture content in seed sample favors the mechanical damage, seed longevity, incidence of disease and insect pests.

Objective

i. To know the moisture content of seeds by suitable methods
ii. To suggest the seed drying.

Multiplication and distribution of high quality seed of improved varieties is a crucial step in agricultural production of any country.

When an entry is identified by the workshop of the concerned project, the breeder begins the seed multiplication of the strain in the following crop season. The seed produced by the breeder after a strain is identified, but before it is released as a variety is termed as the “stock seed”. This seed is known as breeder seed after it is released and notified. In the crop season following notification foundation seed of newly released variety is produced. In the second crop season following the release of variety, certified seed of the variety is produced. Thus the farmer is able to obtain certified seed of a newly released variety for commercial cultivation only in the third crop season following in the notification of the variety. However the seed of such variety reach the farmer even before its release through mini-kit trials. Many other farmers would obtain the seeds from those farmers who conducted the mini kit trials and so on in the next two years. Thus an outstanding variety is likely to reach many farmers even before its certified seeds have been put on sale.

Seed Packing

Seed packaging is the process of filling, weighing and sewing of bags with seed. The choice of packaging materials and amount of seeds to be packed depends on kind of seeds to be packed, duration of storage, storage environment, the seed moisture content, the cost of seed, the cost of packaging material, the geographical area where the seeds will be stored.

1. SEED PATHOLOGY

The area of science that studies the relationship between pathogens and seeds is seed pathology.

2. TYPES OF PATHOGEN

Diseases of plants are caused primarily by three types of pathogens: bacteria, fungi, and viruses. Despite that fungi comprise the largest group of pathogens, the bulk of seed-specific diseases are caused by bacteria or viruses. This is due to the fact that bacteria and viruses are more adopt at entering and then travelling through the veins of the plant, a phenomenon known as ‘systemic infection,’ and from the vascular system may make their way into the developing embryos of seeds.

Fungi, in contrast, tend to be restricted to the outer layers of the plant, where they initiate infection by means of air-borne spores and then proceed to spread by attacking nearby cells of the outer layers. Fungi are much less likely to enter the vascular system of the plant, and thus infect seed mostly when they either ‘crawl’ all the way to seed on the outside of the plant, or else send out spores that land on the seed. In either case, the fungal spores are on the outside of the seed, in the layers of the seed coat, spores on the seed coat are more prone to either dry up and die, or else to get sloughed off with the seed coat during seed germination, thereby failing to cause disease on the next generation of plants.

The objective of seed pelleting is to provide an opportunity to package effective quantities of materials such that they can influence the micro-environment of each seed.
 
Process of Pelleting

Seeds are introduced into a coating drum or pan that resembles a cement mixer. An amalgam of pelleting materials (clays, limestone, calcium carbonate, talc, vermiculite) and cementing adhesives (gum Arabic, gelatine, methyl cellulose polyvinyl alchol) are used to form the pellet and other compounds such as inoculants, fungicides, etc. May be added to enhance seed performance.

1. INTRODUCTION

Indian population is estimated to increase to about 1400 million by 2025. Consequently, India’s requirements for food grains and other food products to feed the increasing population will continue to rise. The food grain requirements are estimated at 350 to 370 million tonnes by 2025. The demand pattern for agricultural commodities for the domestic market will also shift as a result of increasing incomes and faster urbanization. Compared to 26% increase in 1991, the urban population is projected to increase by 42% in 2020. For competing in the global market, the product pattern will shift to high value commodities like fruits, vegetables, floriculture, dairy products, meat and marine products. In such a future scenario, it is necessary to increase agricultural production through improved cropping system, judicious use of agro-inputs and wide use of modern agricultural technology. It is also important to augment and streamline the existing marketing system including handling, transportation, storage, processing and distribution.

1. INTRODUCTION

Seed is the most important determinant of agricultural production potential, on which the efficacy of other agriculture inputs is dependent. Seeds of appropriate characteristics are required to meet the demand of diverse agro-climatic conditions and intensive cropping systems. Sustained increase in agriculture production and productivity is dependent, to a large extent, on development of new and improved varieties of crops and an efficient system for timely supply of quality seeds to farmers..

Seed Priming is the process of controlled hydration of seeds to a level that permits pre-germinative metabolic actively to proceed, but prevents actual emergence of the radical. It is done to increase the speed and uniformity of germination particularly under adverse conditions of temperature, moisture and salinity conditions. In this condition, seeds go through all the essential preparatory processes of germination but prevent cell elongation and radical emergence. During the waiting period at the osmotic barrier the ‘slower’ seeds tend to catch up with the ‘faster ones’ so that the subsequent germination is more uniform, than that of untreated seeds. The duration of priming varies with the crop as well as method of priming such that priming is allowed for I and II stage of seed imbibitions without allowing radical protrusion.

Seed Processing

Seed processing may be understood to comprise all the operations after harvest that aim at maximizing seed viability, vigour and health. It includes cleaning, drying, seed treatment, packaging and storage.

Seed processing is specialized activity and also a tool to improve seed quality further to an acceptable standard. Seed quality parameters like germination, vigour or genetic purity can be improved using processing. Say a seed lot having a minimum standard of 90% germination, but the competition in the market offering seed quality 92 or 95 % then to meet the market demand we can process the seed lots using re-milling or re-conditioning techniques. Also sometimes simple techniques like liquid density separation which uses specific density of the seed to separate good seed from inferior quality can be considered. Various case studies on processing to improve seed quality are given here.

1. SEED PROCESSING

1.1. Purpose

Seed processing is necessary in order to dry the seeds to safe moisture level, remove or reduce to the extent possible the various undesirable materials, weed seeds, other crop seeds, deteriorated or damaged seeds, uniform size grading and seed treatment to upgrade the overall seed quality.

1.2. Physical characteristics that aid in grading and upgrading

The threshed produce are pre-cleaned either manually or mechanically and are graded using different, but optimum sieves of specified sizes. This grading bring homogeneity in the lot which aids in obtaining uniformity among the population in the subsequent sowing.

Different kinds of seeds can be separated when they differ in one or more physical characteristics. Physical characteristics normally used to separate seeds are size shape, length, weight, colour, surface texture, affinity to liquids, electrical conductivity, etc.