eChapters

Annuals Border

In this type of border annuals are planted according to their height to beauty of the garden. Annuals border are found two types.

• Single face border.
• Double face border.

Single face border- In this type dwarf plant is kept on front of beds, medium height annuals are planted in the centre while the taller annuals are planted in the back.

Double face border- In this type tall annuals are planted in the center and medium and dwarf annuals are planted in both sides of tall annuals so that full view can be seen from both side.

Plants yielding oilseeds are economically important in India next only to food crops and play an important role for sustainability of  cropping systems and soil health. Oilseeds scenario in the country underwent a sea change in  last fifteen years. India changed from net importer in  1980s to a net exporter  during  early 1990s. Again, it is back to net importer importing more than 40 % of its annual edible oil needs. Country’s demand for edible oils is  rising to double  the current level of 4% (as against productivity growth of 2% in 1986-2001) in  next 12 years (Hegde 2004). To meet  challenges of oilseeds production, there is  need to adopt multi-pronged strategy which involves enhancing production through area expansion and productivity improvement through improved technologies and value addition . As a progressive step in this direction of self sufficiency, there is  need to identify alternative oilseed trees/plants which can be grown in wastelands. There are more than 300 different kinds of tree species which bear seeds  rich in oil and  introduction of simarouba is an important step in this direction. National Oilseeds and Vegetable Oil Development (NOVOD) Board under Ministry of Agriculture  identified simarouba as a potential Tree Bearing Oilseed (TBO) for popularization in India and placed it in  first place in their list of importance.

In crop production mostly basic inputs are seeds or seedlings/planting material, irrigation water, fertilizers, weedicides and pesticides. Site specific input application means providing plant input requirement at right time, in right amount and at right place. Site specific is a term that refers to treating the smallest possible area as a single unit. A site is simply the smallest unit the farmer can manage with the tools available. The treatment of each site is specific to the needs of each site as determined by soil test data and crop scouting reports. There are technology tools for using site-specific management more effectively. In precision agriculture site specific application tools and technologies are as under

In crop production mostly basic inputs are seeds or seedlings/planting material, irrigation water, fertilizers, weedicides and pesticides. Site specific input application means providing plant input requirement at right time, in right amount and at right place. Site specific is a term that refers to treating the smallest possible area as a single unit. A site is simply the smallest unit the farmer can manage with the tools available. The treatment of each site is specific to the needs of each site as determined by soil test data and crop scouting reports. There are technology tools for using site-specific management more effectively. In precision agriculture site specific application tools and technologies are as under:

Indian hot arid zone which is about 12% of total geographical area of the landmass of 0.32 million km² has maximum covering in western Rajasthan i.e. 61% of the total area whereas the other areas in arid region are available in the states of Gujarat, Punjab, Haryana, Andhra Pradesh and Karnataka accounting for 20, 5, 4, 7 and 3% of hot arid area whereas the cold arid area of 8.4 million ha lies in the state of Jammu & Kashmir covering the Leh and Ladakh region.

The hot arid area is characterized by frequent droughts of 47% of frequency in the last century of moderate to severe nature. Due to higher occurrence frequency of droughts in this region of state, the livestock assumes great importance as a drought management measure as agriculture is at the mercy of rainfall pattern which is very uncertain in amount as well as distribution coupled with poor soil condition, higher evapotranspiration and higher wind velocity causing the soil erosion.

For arid region of Rajasthanthe general climatic conditions, topographical features and biotic factors do not encourage agricultural operations in the absence of extractive industry the peasantry has to fall upon animal husbandry as their main occupation. Rearing some of the finest breed of cattle, camel, sheep and goats known for their endurance making much use of the meagre feed resources which are grasses ,herbs, shrubs, tree leaves and cultivated feed and fodder crops. Livestock farming has some in built superiority over crop farming as far as growth; stability and resource conservation are concerned. On an average, the region experiences 3 years of drought in every 10 years. The natural forces constituting the soil-climatic complex, which conspire to reduce the crop productivity and cause instability in agricultural production, have much less impact on livestock farming. This is due to differences in the nutritive value of natural vegetation, which mainly sustains livestock.

Conventional fertilizers often exhibit low nutrient-use efficiency, resulting in nutrient losses, soil degradation, water contamination and unnecessary production costs. Nano-fertilizers offer controlled and targeted nutrient delivery through formulations engineered at the nanoscale. Their high surface-area-to-volume ratio can improve nutrient availability, plant uptake, growth, bulb quality and storage performance while reducing conventional fertilizer requirements. This chapter explains the nature, modes of action and potential benefits of nano-fertilizers in onion production. It also considers nano-biofertilizers, smart nutrient-delivery systems and nano-sensors. Particular attention is given to manufacturing cost, nanotoxicity, effects on soil microorganisms, farmer accessibility and the need for standardized safety and regulatory frameworks.

Efficient nutrient and water management is essential for achieving high onion productivity without degrading soil and water resources. Excessive fertilizer use, poor irrigation practices, groundwater depletion, nutrient imbalance and climate variability can reduce input efficiency and environmental sustainability. This chapter presents soil testing, integrated nutrient management, site-specific nutrient application, microbial interventions, residue management, nanotechnology and digital soil mapping. It also covers drip and sprinkler irrigation, scheduling, fertigation, mulching, rainwater harvesting and other water-conservation practices. Technologies such as SPAD meters, GreenSeeker, GPS, GIS, drones, remote sensing, sensors, artificial intelligence and IoT systems facilitate real-time monitoring, need-based application and climate-smart management of agricultural resources.

Botany:Snake gourd belonging to the family Cucurbitaceae native to Southeastern Asia and Australia but cultivated throughout the world for its curved and oddly shaped fruits that appear like snakes hanging on the supports or ground. This subtropical plant grows very fast in warm climates and produces lots of fruits for a long time. It is suitable for growing for home garden and fresh market.

Climate and soil: Snake gourd is adapted to wide variety of soil and climatic conditions. It requires a minimum temperature of 18^oC during early growth, but optimal temperatures are in the range of 24–27^oC. Snake gourd tolerates a wide range of soil but prefers a well drained sandy loam soil that is rich in organic matter. The optimum soil pH is 6.0–6.7, but plants tolerate alkaline soils up to pH

Varieties: CO1,CO2, PKM 1, PLR 1 and PLR 2.

Snapmelon [Cucumis melo L. var. momordica (Roxb.) Duthie * Fuller] originated  in India. It was intensively cultivated in the 19th century in Northern India (Duthie 1905) where it is commonly called as ‘Phut’ which means to split or crack. Immature fruits are cooked or pickled and the low sugared mature fruits are eaten raw. The mature fruits crack or burst. Fruit cracking is  either longitudinal or random starting in middle of fruit (Fig.1).

Sodium benzoate is added to many fruit products to act as a preservative for the extension of the shelf life. Food Safety and Standards Regulations have specified the maximum level of sodium benzoate (Benzoic acid) in different products like sauce, ketchup, pickles, squash, etc. Therefore, the estimation of sodium benzoate (benzoic acid) in such products is considered a routine quality control procedure.
Principle
Benzoic acid which is sparingly soluble in water is converted into watersoluble sodium benzoate by the addition of NaOH in a sample containing sodium chloride solution. When the Sodium Benzoate solution is acidified with excess HCl, water-in-soluble benzoic acid is formed which is extracted with chloroform. The chloroform is removed by evaporation and the residue containing benzoic acid is dissolved in alcohol and then titrated with standard NaOH.

6.1 INTRODUCTION

The Climate and soil play important role in growth and development of the plant. Growers in general and fruit growers in particular should have adequate knowledge of the effect of various soil and climatic conditions on raising horticultural crops. Horticultural crops cannot be grown in all types of soil and climate. Hence zone- wise cultivation is made. Climate includes a number of parameters like temperature, rainfall, atmospheric humidity, wind, hail and light whereas soil covers factors like moisture content, texture, soil reaction, nutrient content, chemical composition and soil temperature.

6.2 SOIL

Soil is a thin outer covering of the earth surface. It is the natural resource directly developed by different natural forces acting on natural materials. Soil serves as a base and support for plant growth. It is a basic medium for plant growth and supplies nutrients for growing plants. Soil is the home of the plant root and the reservoir for essential nutrients and water for growth and development of crop plants.

Soil- Soil is the upper most crust of earth surface which supports plant growth. It is defined as a three phase system in which plants grow. These phases are solid, liquid and gas and are essential. Solid part is frame which provides space for other two. This consists of minerals, clay minerals and organic matter. The soil is also a living system with millions of microbes that breakdown organic matter and builds it again.

Some points are following

Microbes are essential and survive only when soil is well aerated and rich in organic matter and devoid of waterlogged conditions.

Texture of soil depends on the size of solid particles and classified as gravel, coarse and fine sand, silt and clay.

Soils are classified according to relative distribution of these particles and there are 12 textural classes.

Likewise, arrangement of these particles is referred as structure, and both texture and structure lend soil physical properties like water holding capacity, aeration and bulk density.

Generally loamy soils and crumb structure are most preferred for fruit crops.

According to level of organic matter, soils are classified as mineral soil or organic soil and soil having more than 20% organic matter is organic soil like peat and muck.

Soil: Soil is the upper most crust of earth surface which supports plant growth. It is defined as a three phase system in which plants grow. These phases are solid, liquid and gas and are essential. Solid part is frame which provides space for other two. This consists of minerals, clay minerals and organic matter. The soil is also a living system with millions of microbes that breakdown organic matter and builds it again.

Some points are following

•    Microbes are essential and survive only when soil is well aerated and rich in organic matter and avoid of waterlogged conditions.

•    Texture of soil depends on the size of solid particles and classified as gravel, coarse and fine sand, silt and clay.

•    Soils are classified according to relative distribution of these particles and there are 12 textural classes.

•    Likewise, arrangement of these particles is referred as structure, and both texture and structure land soil physical properties like water holding capacity, aeration and bulk density.

Introduction

Many of the globe’s major food crops viz., wheat, rice and vegetables have reached “yield stagnation” or “yields plateau”. This can be attributed to the land degradation and soil diminishing capacity to supply nutrients at the required rate due to over mining of essential nutrients. Further, imbalance use of fertilizers and lesser use of organic manures over the years have badly affected the soil health. To bring back life to the soil and relieve it from nutrient stress; fertilizers and manures/bio-fertilizers have to be applied in a scientific manner. At the same time, their indiscriminate use can result either in their under utilization and toxicity or leaching to the lower horizons, leading to underground water and create pollution problems. The soil is also the main source of sixteen mineral elements identifies in view of their importance for plant growth. These are N, P, K, S, Ca, Mg, Na, Fe, Mn, Zn, Cu, Mo and Cl (Tisdale et al., 1985). Nitrogen, potassium and phosphorus have been designated as major nutrient elements in order of their removal by the plant; sulphur, calcium and magnesium as secondary nutrients while zinc, copper, iron, manganese and molybdenum are called micro nutrients as these are taken by plant in traces. 
Nutrients need of vegetables depends upon the yield response to applied nutrients from fertilizers, agro-climatic conditions, variety and nutrient availability from the soil pool. The nutrient status of the soil further depends upon the quantity of total and available nutrients present in the soil pool. The soil tests helps in selecting the proper manuring schedule for various crops in a sequence by knowing about the nutrient build up or depletion in the soil profile. The adequacy of soil testing methods to correctly predict the fertilizer needs varies with the soil type, climate/soil moisture and crop species. The rainfall also influences the efficiency of soil testing methods, especially nitrogen and potassium when it becomes imperative to have tissue analysis for modify the fertilizer recommendations. Plant tests also help to identify the nutrient deficiency in standing crop and in the event of deficiency of a particular nutrient helps in taking corrective measures (Sud 
et al., 2008).

INTRODUCTION

Potatois theworld’s most importantnon-grain foodcommoditythatranks fourth as main food crop in the world after rice,wheat and maize. The crop is grown inmorethan 100 countries, mainly in Asia (195.67 million tons)and Europe (121.76 million tons)(yieldin 2017 as per FAOSTAT, 2019). Because of its efficiency in producing high dry matter, energyand edibleprotein per unit area per unit time, it holds promise for food security in the scenario of ever growing world population. The full potential of this crop however, can onlybe realized if diseases and pests are kept under control, especially in asubtropical country like India, wherethe weather is highly conducive for a number of pathogens.

A number of soiland tuber borne diseases are known to affectthe potato crop causing heavy yield losses. These diseases not only reduce quality and market value of the producebut also spread to new un-infested fields through infected seed potato tubers. Diseasessuch as black scurf, common scab and powdery scab disfigure potato tubers and reduce their market value whereas dry rot, charcoal rot and softrot spoilthe harvested produce during transitand storage. Potatowart is a serious disease which once established is difficult to eradicate and thus require quarantine measures. Bacterial wilt or brown rot of potato is another serious disease which is likely to threaten potato cultivation with the rise in globaltemperature and requires immediate attention.

Potato is becoming a more and more important foodstuff in the world and therefore, its cultivation is expanding fast especially in developing countries. This intensivecultivation, in fact, has led to the emergence of diseases in certain areas where they were of less importance in the past. For instance common scab, known to be a minor disease about2-3 decades ago, is now emerging as serious problem in many potato growing areasof the country including Indo Gangetic plains. Similarly brown rot/bacterial wilt which was endemic in mid hills and plateau region, has now become a limiting factor for potato cultivation in many areasin Madhya Pradesh, West Bengal, north eastern region and in Kumoan hills of Uttrakhand. Sclerotium wilt on the other hand has shown upward trend in plateau region especially in Karnataka. This is because the dynamics of pathogens keeps on changing over time and space and also with the changing farming practicesof a region. Many such new diseases are likely to emerge in a big way in future also, hence warrants regular and careful monitoring. In the following pages, the majorsoiland tuberbornediseases are discussed with special reference to India.

Dry areas specially arid and semiarid regions are characterized by harsh climatic condition with limited natural resources like fresh water and vegetation. Soil which is most important component for agricultural production is also problematic in this region due to high salt content. Further, these regions face dual water problems: very low rainfall and poor quality of available water. Most of the available groundwater in these areas has high salt content, which further enhance salt content in soil after irrigation with this water. Salinity of soil is one of the most severe abiotic factors limiting agricultural production in arid and semiarid regions of the world. Term ‘salt-affected soil’ refer to soils in which salts interfere with normal plant growth, and is broadly divided into saline, saline- sodic and sodic soil, depending on amounts of salt, type of salts, amount of sodium present and soil alkalinity. Excessive soluble salts in the saline soil limit the ability of plant roots to absorb soil water even under wet soil conditions, while high sodium content in sodic soil reduce the availability of Ca, Mg, other micronutrients and finally deteriorate physical condition of soil. Poor physical structure of soil results in difficult to till, poor seed germination due to soil crusting and restricted plant root growth. Due to the poor physical structure, sodic soils are also susceptible to wind and water erosion compared to saline soils. All these negative impact of salt accumulation on the soil finally affect growth and yield of the crops. As per estimates of ICAR-Central Soil Salinity Research Institute (CSSRI), Karnal, crop production loss to country due to sodicity is around 11.18 million tonnes while due to salinity is around 5.66 million tonnes. Furthermore, the area under this category is rising due to secondary salinization caused by faulty management of irrigation water, seepage loss, impeded drainage, rapid rise of water table causing water-logging. Certainly, these soils and saline water threaten the livelihood security of farming community. The area under cultivation is decreasing due to diversion of agricultural land in to other uses to meet needs of rising population and as such, agriculture has to make best use of poor quality land and water resources to meet the food demand. Therefore, management of salt affected soil become necessary for ameliorating negative impact and enhancing agricultural production in these regions. Each type of salt-affected soil has different characteristics and thus required different strategies for management.

In soil culture, also known as in-ground culture, crops are raised on level ground as well as in raised beds. Soil culture is more often used in growing vegetables (e.g., tomatoes, lettuce, cucumbers, and peppers) rather than ornamental crops such as herbs, roses, freesia, and foliage plants as well as popular with smaller commercial and organic growers. The soil should be well drained, fertile, have a medium to light texture and be high in organic matter. The soil in a greenhouse should be worked as deeply as possible to break any existing hardpans or those that may have developed because of repeated traffic over the area. Fumigation or pasteurization of the soil is a must before each crop or at least once a year. This will help to destroy disease, nematodes and weeds. If soil is steamed, hold it at 180 degrees F (82°C) for 4 hours. Production techniques used in soil culture are similar to intensive crop production methods used in the field. Although soil is readily available at most places where a greenhouse is located most commercial growers, no longer rely on soil culture in the greenhouse as they did ealier. Some of the reasons include insect and disease pressures and costly fumigation.

Soil fertility management refers to the practices and techniques used to maintain and improve the fertility of soil. Soil fertility is crucial for agriculture because it determines the soil's ability to provide essential nutrients to plants, support their growth, and sustain productivity over time. Effective soil fertility management aims to optimize soil health and productivity while minimizing environmental impacts.

3.1 Key Aspects of Soil Fertility Management Include

1. Nutrient Management: This involves supplying essential nutrients (nitrogen, phosphorus, potassium, etc.) to the soil through organic or synthetic fertilizers to meet the needs of crops.

2. Soil Amendments: Adding organic matter (such as compost or manure) or other amendments (like lime or gypsum) to improve soil structure, water retention, and nutrient availability.

3. Crop Rotation and Diversification: Rotating crops and diversifying plant species can help manage nutrient depletion and improve soil health by reducing pest and disease pressures.

4. Conservation Tillage: Minimizing soil disturbance through reduced tillage or no-till practices helps preserve soil structure, reduce erosion, and maintain organic matter content.

5. Cover Cropping: Planting cover crops during fallow periods or between main crops helps prevent soil erosion, improve nutrient cycling, and enhance soil fertility.

Soil fertility

• Soil serves as a source of nutrient required for the growth and development of plant. This characteristic of soil is called soil fertility.

Management practices

• Improved organic matter and soil moisture in soil, favours the growth of micro-organism beneficial for maintaining fertility of the soil.

Manures

• It is an organic waste material of plant and animal origin. It is used improvement of soil fertility. There are major 2 types of manure

1. Bulky organic manures
2. Concentrated organic manures

Pasteurization: The heat treatment given to soil to free it of harmful microorganisms or pathogens and pests is called pasteurization. It kills weed seeds also.

Pasteurization of greenhouse plant growing media

Greenhouse growing medium may contain harmful pests such as disease causing organisms, nematodes, insects and weed seeds. It is advisable to decontaminate it by heat treatment or by treating with volatile permissible chemicals.