eChapters

14.1 INTRODUCTION

The efforts for harnessing the natural resources for sustainining the human race have been ‘on’ since the beginning of the civilization. The basic needs of food, fuel and fodder are obtained from the land resources with the combination of water and sunlight. The combination of information technology and use of hi-tech equipments paved the way for the introduction of precision horticulture. Precision horticulture may be defined as application of a holistic management strategy that uses information technology to bring data from multiple sources to bear decision associated with agriculture production, marketing, finance and personnel. Enhanced input efficiency is an important component of horticultural production under precision horticulture site specific management. Enhanced input efficiency in crop management can be obtained only when suitable varieties, desired amount of nutrients and water based on calculations, at right time and by proper method are used.

With recent advances in geographic positioning system, remote sensing, data processing, harvesting equipment, fertilizer and pesticide applicators, the approach can be used from a more practical stand point to identify variability and to use the variable rate of inputs over an entire field.

In recent years, there is considerable awareness about the nutritional security and food safety. More emphasis is given to underutilized fruits due to their high nutritive and medicinal value in addition to being resistant/tolerant to many biotic / abiotic stresses. The demand of these fruits are gradually increasing owing to tremendous potential for commercial exploitation aimed at improving the economic status of the poor and marginal farmers. An area, which needs immediate attention, is the collection, documentation, conservation and utilization for their sustained production and popularization.

Agriculture is a generic term used to include various types of farming systems, single to multiple crops under various agro-climatic conditions thereby covering crop husbandry, animal husbandry, vegetable growing, floriculture, horticulture, fishery, poultry, goat rearing, piggery, rabbit rearing, sericulture, forestry, vermi-composting, etc. Indian agriculture is a symbiosis of various production systems, a way of life or a tradition, which for the centuries have shaped the thoughts, the outlook, the culture, and the social and economic force of rural life. It is well known for its multi-functionalities of providing employment, cultural heritage, livelihood, social security, family bondage, nutritional and food security. Although agriculture is the main stay of the Indian economy and supports nearly two-third of the work force, yet this is not a highly rewarding enterprise for a large majority of farmers who hold small and marginal size holding. At the same time, the size of the land holding is on a gradual decline, while contribution of farmwomen is on an increase as men go elsewhere in search of better jobs. This sector holds and will continue to be central to all strategies of socio-economic development of the country. A farmer is a multi-purpose entrepreneur (Rajavanshi, 2007).

EXPERIMENT

TECHNOLOGY FOR EXTRACTION OF KERNEL OIL FROM STONE FRUITS

Apricot, peach, plum, cherries, nectarines etc are the important stone fruits belonging to the family Rosaceae. These fruits are known to contain stones/pits i.e., apricot (6.0-11.5%), peach (7.5-11.5%), plum (4.5-7.0%) and these stones are reported to contain kernels (%) apricot (28.0-32.0%), peach (5.7-5.9%), plum (10.0-20.8%), almond (28.0-30.0%). These kernels can yield an oil yield of (42.5-45.5%), (38.5-41.5%), (39.2-40.6%) and (52.0-58.9%), respectively. Thus, these stone fruit kernels can be utilized for extraction of kernel oil by using the improved technology developed for extraction of oil. The developed technology consists of mechanical decortication of stones by the use of mechanical decorticator, kernel separation by using specific gravity separation technique, oil extraction by using table oil expeller and oil filtration through oil filter press followed by packing in PET bottles and PE pouches.

Mechanical decorticator: The mechanical decorticator is a type of roller crusher consisting of two rollers moving in inward opposite directions with the help of 3 HP motor and is provided with a hopper and feeder assembly. The clearance between two rollers is adjusted according to the respective size of stones.

Table oil expeller: Oil expeller is a 24 patti screw type oil expeller driven by 7HP motor, in which the kernels are fed into the moving hopper at pre-determined flow rate, which are pressed in between rollers (worm) and side walls of the expeller. The kernels are then, passed through the expeller 3-4 times until a thin slice of press cake is obtained.

ABSTRACT

Zingiber officinale is a herbaceous perennial. The absence of seed set in ginger makes conventional breeding methods inapplicable. Genetic modification through biotechnological means is the only way for introducing novel genes into the cultivated types. Transient expression of the gus reporter gene was used in preliminary experiments. Agrobacteruim tumefaciens strains EHA105/p35SGUS Int. effective in expressing b- glucuronidase activity was used for standardizing the optimum conditions for effecting transformation, such as preculture of explants, bacterial dilution, infection time, co-cultivation period etc. In addition, effects of acetosyringone and explant wounding were evaluated using the same strain. Genetic transformation of bud and regenerated plantlets was confirmed by their ability to grow on MS medium containing kanamycin 100 mg l-1 + cefotaxime 300 mg l-1 by histochemical b-glucuronidase assays.

Factors for deterring the Fertilizer Schedule are two factor

Soil Supplying Power: Growing different crops during different seasons alters the soil nutrient status, estimated by soil analysis at the beginning of the season. The soil supplying power increases with legume in rotation, fertilizer application and addition of crop residues. The available nitrogen and potassium in soil after groundnut are higher to initial status of the soil. But after pearl millet, only potassium status in the soil is improved and no changes in P.

Nutrient Uptake by Crops: The total amount of nutrients taken by the crops in one sequence gives an indication of the fertilizer requirement of the system. The balance is obtained by subtracting the fertilizer applied to crops that nutrient taken by the crops.

Residual Effect of Fertilizers: The extent of residues left over in the soil depends on the type of fertilizer used. Phosphatic fertilizer and FYM have considerable residue in the soil, which is useful for subsequent crops. The residues left by potassium fertilizers are marginal. Legumes add nitrogen to the soil in the range of 15 to 20 kg/ha. The amount of nitrogen added depends on the purpose. Green gram grown for grain, contributes 24 and 30 kg N respectively to the succeeding crop. Inclusion of leguminous green manures in the system add 40 kg to 120 kg N/ha. The availability of phosphorous is also increased by incorporation of green manure crops.

Benefit of biofertilizers have been extensively studied for various agricultural and horticultural crops. However, the effectiveness of inoculated biofertilizers are influenced by several factors. If the use of biofertilizers have to be popularized in horticultural crops, the major factors affecting their performance particularly in relation to soil, plant, quality of the product and application methods have to be addressed. Factors affecting the performance of biofertilizers are:

4.1 Quality of the product

4.1.1 Production process

The high quality of biofertilizers are determined by the production process (Bashan et al., 2014). At the same time, the population density of mother culture and the quality of the final products are directly related (Stephens and Raskm, 2000). As the inoculum consists of a strain, the relationship among the microorganisms interaction in the rhizosphere have to be understood. In the case of more than one microorganisms, the efficiency depends on the various mode of action by various microorganisms which might overlap with antagonistic acitivities (Vassilev et al., 2001, 2006 b). The relationship of microorganisms with plants is not based on the taxonomic diversity, but their functional diversity (Maherali and Klironomos, 2007).

The efficiency of biofertilizers could be assured by enhanced shelf life of the inoculant and biological traits which are a challenge for developing a formulation (Bashan, et al., 2014). Hence, either single or consortia of microorganisms formulation with or without additives determines the efficacy of the biofertilizers. The formulation determines shelf-life during storage and transport, which enhances the persistence of the strain in soil and get maximum benefits to the host plants after inoculation (Manikandan et al., 2010; Schoebitz et al., 2012). Different kinds of carriers are used in the formulation process which affects the overall quality and efficacy of the biofertilizers (Bashan et al., 2014; Herrmann and Lesueur, 2013). Granular inoculants showed good results under stressed soil conditions (Clayton et al., 2004; Lupwayi et al., 2006). Encapsulation of the microbial strain into polymers allow diverse compositions and structures (Vassilev et al., 2005) but, have limitations for commercial production (Bashan, et al., 2014; John et al., 2011). Use of additives might improve the shelf life of the product (Bashan et al., 2014; Malusà et al., 2012; Herrmann and Lesueur, 2013) with introduction of specific substances to enhance the efficacy of biofertilizers.

3.1. Non-Climatic Factors

Apart from climate several other non-climatic factors has to be considered before selection of proper greenhouse technology, which are listed in the following text.

1. Location and selection of site: The ideal location for greenhouse cultivation is an area having moderate climate with high sunlight, low humidity and good natural drainage. It is better to avoid storm prone areas or it is a must to take necessary protection, like wind-break and shelter belt, in such areas. However, selection of site, where the greenhouse will be constructed, is the first consideration to select the proper greenhouse technology. The proper selection of site will also depend upon various non-technical factors, which are listed below.

Postharvest loss of fruits and vegetables is defined as “that weight of wholesome edible product (exclusive of moisture content) that is normally consumed by human and that has been separated from the medium and sites of its immediate growth and production by deliberate human action with the intention of using it for human feeding but which for any reasons fails to be consumed by human.” Not only quantity and quality but even the appearance of fruits and vegetables are affected, and their market value is reduced. Most ‘skin deep’ injuries such as ‘fly speck’ in apples do not affect the edible part. Some infections are not harmful as they occur on inedible parts and can be trimmed off before consumption ego Colletotrichum spots on the outer leaves of cabbage]. Fresh fruits and vegetables are perishable and highly prone to these losses because they are composed of living tissues. These tissues must be kept alive and health throughout the process of marketing. These are composed of thousands of living cells which require care and maintenance (Alao, 2000). The pathological rots are the most serious which is followed by mechanical injury. Pathological rots in combination with mechanical damage cause serious damage to the perishables. Environmental factors such as temperature, relative humidity and oxygen balance most especially during storage are also greatly responsible for damage also environmental conditions such as temperature and humidity are responsible for rendering fruits and vegetables susceptible for pathological attacks (Yahaya and Mardiyya, 2019). Fungi and bacteria are the major pathogens, which cause postharvest diseases in crops leading to about 30 % loss. Normally diseases will be more at improper temperature and relative humidity. Apart from causing disease, pathogens are also involved in ethylene production, which hastens the deterioration of the product.

8.1 Introduction

There are many theories that deal with the generation of innovations, their diffusion and adoption or non-adoption by the end users. Such theories include actor-network theory, knowledge systems and network theory, strategic niche management theory and adoption and diffusion of innovations theory (Rogers and Shoemaker, 1971; Rogers, 1983, 1993, 2003). Among the different theories, the diffusion and adoption theory has achieved a prominent position in the field of anthropology, sociology, public health, medical sociology, communication, marketing and management, economics, public administration, industrial engineering, geography and many other disciplines all over the world for more than half a century. The main elements of diffusion of innovation as identified by Rogers (1962) are: i) An innovation, ii) Communication channels, iii) Time and iv) Social system. This shows that diffusion of any innovation will take place only if a new idea or practice exists which is accepted by an individual or a group of people over a period of time. The rate of diffusion depends upon the availability of communication channels and structure of the social system. But, in 1966, Fliegal and Kivlin complained that the diffusion of innovation has the status of a basted child with respect to parent’s interest in social and cultural change: Too big to ignore but unlikely to give full recognition.

The sustainable agricultural practices include integrated pest management (IPM), integrated nutrient management (INM), soil conservation and water management. However, there is not a single technological innovation were the innovator/company that commercializes a technology is not interested whether it is adopted/purchased by the consumer.

6.1 Hal for Land Preparation: This plough is constructed from Babool, sal, sisham wood, and mild steel. The body and handle are made from one piece, with a separate shoe. It is operated by one pair of bullocks with a yoke, weighs 48 lbs, and can cover 0.8 to 1 acre per day. It works to an average depth and width of 5 and 6 inches in alluvial soils, with a draught requirement of 185 lbs. It is used by 100% of the farming community in Meerut, Uttar Pradesh. (ICAR, 1960)

6.2 Wetland Plough (Dammu Nagali) for Land Preparation: This plough is made from Babool, palmyra, and mild steel, weighing 30-40 kg. Operated by two bullocks and one man, it is attached to the yoke with ropes for puddling rice fields, covering half an acre per day. It has a draught of 200-220 kg and ploughs to a depth of 4-5 inches and width of 5-6 inches in black and red soils. Repairable locally, its annual maintenance costs range from Rs 0.5 to 1.0, with an operational cost of Rs 25 per hectare. It is widely used in the coastal belt of Andhra Pradesh (Guntur and West Godavari). (ICAR, 1960).

1. Introduction

The status of mechanization in India is at a very low level for horticultural crops. The farmers usually go behind the use of traditional methods for different farm operations (Fig 1) and practices for cultivation of horticultural crops, their handling, storage, and processing. This results in less yields, high cost of cultivation and high crop losses from harvesting till processing. The use of different available hand tools, machinery and hi-tech technologies in the production and processing of the crops will lead to increased yields and decrease in losses to a great extent (Mandhar, 1999).

Introduction
Spices have been considered significant in the culinary art from time immemorial. India, “The Homeland of Spices” is one among the largest producers, consumers and exporters of spices as well as spice products. Spices comprise different plant components such as floral parts or fruits or berries or seeds or rhizomes or roots or leaves or kernel or aril or bark or bulbs. The recorded history of the use of spices dates back to 5000 years or so from the Egyptian or at the most from the Indus valley civilization. Spices are used for flavouring, seasoning and imparting aroma in various cuisines. Besides these inherent qualities, some of them are known to be fungistatic, antimicrobial or antibiotic. They are also processed into numerous ‘value added’ products such as oleoresins, essential oils, curry powder etc. Black pepper, cardamom and turmeric are the major spice crops and its production and marketing are the main economy stays of lakhs of people of the country. Billions of rupees are involved in domestic trading and foreign export. Therefore, it is highly imperative for farmers to adopt the advanced practices to sustain spices productivity. Even, additional income could be generated from the intercropping of spices from the interspaces in mango orchards (Shukla and Adak, 2020). Thus the present chapter included all aspects of production to protection and value addition for  the benefits of growers.

Lipids are a class of compounds that are defined by how they are isolated, rather than by their composition. Lipids are molecules that can be extracted from plants and animals by low polarity solvents such as ether, chloroform, or even acetone. They are not appreciably soluble in water. Fats and the fatty acids from which they are made belong to this group as do oils, waxes and steroids. Hydrolyzable lipids are those that contain a functional group that will react with water. The functional group is usually an ester and the list of compounds includes neutral fats, waxes, phospholipids, and glycolipids. Non- hydrolyzable lipids lack such functional groups and include steroids and fat-soluble vitamins (e.g. A, D, E, and K).

Fats and oils are composed of triacylglycerols. These are compounds prepared by the union of glycerol (1,2, 3-tri- hydroxypropane) and 3 fatty acids to form a triester. Fats and oils belong to a group of biological substances called lipids. Lipids are biological chemicals that do not dissolve in water. They serve a variety of functions in organisms, such as regulatory messengers (hormones), structural components of membranes, and as energy storehouses. Fats and oils generally function in the latter capacity. Fats differ from oils only in that they are solid at room temperature, while oils are liquid. Fats and oils share a common molecular structure. The fats and oils contain three ester functional groups. Fats and oils are esters of the tri- alcohol, glycerol (or glycerine). Therefore, fats and oils are commonly called triglycerides, although a more accurate name is triacylglycerols. Triglyceride molecules contain mostly carbon and hydrogen atoms, with only six oxygen atoms per molecule. This means that fats and oils are highly reduced (un-oxidized). Oils are particularly common in seeds, where the stored energy helps seedlings during germination, until they can exploit solar energy through photosynthesis. Fatty acids contain an even number of carbon atoms, from 4 to 36, bonded in an unbranched chain. Most of the bonds between carbon atoms are single bonds. If all of these bonds are single bonds, the fatty acid is said to be saturated, because the number of atoms attached to each carbon atom is the maximum of four. If some of the bonds between carbon atoms are double bonds, then the fatty acid is unsaturated. When there is only one double bond, it is usually between the 9th and 10th carbon atom in the chain, where the carbon atom attached to the oxygen atoms is counted as the first carbon atom. If there is a second double bond, it usually occurs between the 12th and 13th carbon atoms, while a third is usually between the 15th and 16th.

Thrips : Thrips flavus : Thripidae

Infestation of thrips is generally during hot months with high night humidity.  The attack by thrips leads to discolouration, bronzing and drying of affected leaves.

Semilooper : Thysanoplusia orichalcea  : Noctuidae

Bluish green or grey coloured eggs are laid singly on lower surface of leaves.  Larvae feed voraciously on leaves and defoliate plants.

Botany:Fenugreek is a leguminous plant, belonging to the Papilionaceae family. Fenugreek is an annual herbaceous plant between 20 and 50cm high. (sometimes up to 100cm.). Its stem is erect, branched, grooved and with little pubescence. The leaves are compound, petiolate, oblong leaflets formed by three kills reminding those of alfalfa. White or yellow flowers , isolated or arranged in pairs. Fenugreek fruits are narrow and elongated pods. They contain 10 to 20 seeds, tiny yellow, quadrangular, with a groove in the central part dividing them into two unequal lobes.

Land Requirements: Land to be used for seed production of Kasuri methi and methi shall be free from volunteer plants.

Varieties: Co 1, Pusa Early Bunching, Lam selection 1, Rajendra Kranti, Kissar Sonali, RMT1and CO 2.

Soil: A rich well drained loamy soil is best suited.

Climate: Cool and comparatively dry, frost free climate. It requires a warm climate with mild temperatures for a good seed production (between 8 and 27°C).It grows well in full sun. Sow it in places sheltered from the wind. Resistant to frost and temperatures down to -5°C. However, low temperatures during planting causes not all seeds to germinate.

Season: June - July and October - November.

Fermentation was known to mankind from time immemorial. But, development of biochemical principles of  fermentation  was originated by  Lavoisier in France in 1789 by way of analysing chemical composition of  sugar and its fermentation products such as ethanol, carbon dioxide and  acetic acid. Many products are produced by fermentation process. In fermentation, controlled action of selected microorganisms is used to alter  texture of foods, preserve foods by production of acids or alcohol or to produce fine flavours and aromas which increase value of raw materials.

1. INTRODUCTION

Fermentation is an age old technology. It has been used by man since antiquity. It has been employed to produce a number of fermented products such as wine, beer, curd, vinegar, pickles and several others. Fermentation was discovered quite early and by chance but the underlying principles were discovered very late. Primarly fermentation was used as a method of shelf-life extension of the produce in the time of glut production, though the final product had modified sensory qualities. Thus, fermentation and drying were the main methods of preservation. With the discovery of new methods of preservation, fermentation as a method of preservation has gone into background and as technique of flavour development and product with modified sensory quality came into practice. In this chapter, fermentation as a method of preservation has been described.

Fermentation in food processing typically is the conversion of carbohydrates to alcohols and carbon dioxide or organic acids using yeasts, bacteria, or a combination thereof, under anaerobic conditions.

Introduction

India is the second most populous country in the world. The per capita cultivable land resource is shrinking day by day. To meet the food, fibre, fuel, fodder, and other needs of the growing population, the productivity of agricultural land has necessarily to be increased. It requires increased use of agricultural inputs like quality seeds, fertilizers, water, agro-chemicals, etc. in such a manner that do not create any environmental problems.

Plant needs different chemical elements to grow and thrive. The most important chemical elements include (i) carbon, hydrogen and oxygen, which are basic life building blocks and are available in plenty from air and water (ii) nitrogen, phosphorus and potassium which are the macro nutrients and affect the plant growth significantly (iii) sulfur, calcium, and magnesium as secondary nutrients and (iv) boron, chloride, copper, iron, manganese, molybdenum and zinc as micronutrients in very small quantities.

14.1 INTRODUCTION

India is conferred with a varied agro-climatic condition which are highly favourable for growing a large number of horticultural crops such as fruits, vegetables, root tubers, ornamental, aromatic plants, medicinal herbs, spices and plantation crops like coconut, areca nut, cashew and cocoa (Ministry of Information and Broadcasting, GOI, 2008). India is next only to China in area and production of vegetables and occupies prime position in the production of caulif lower, second in onion and third in cabbage in the world. After achieving food security, it is being increasingly felt that India needs to achieve nutritional security for betterment of its population. In achieving nutritional security fruits and vegetables play an important role (Ganeshmurthy et al.2011). Although we have achieved good production levels of fruits and vegetables, the present production of fruits and vegetables may not be enough to meet out the demand. To feed the ever-increasing population in a sustainable way a tremendous effort will have to be made to increase the production of fruits and vegetables both horizontally and vertically through a rational and balanced use of production inputs, specially the mineral fertilizers. Soil fertility is a key factor for successful crop production, and it is a measure of capacity of soil to supply plant nutrients. The importance of soil fertility and fertilizer management is being increasingly recognized in all countries recently to meet the demand for food and other agricultural raw materials. Intensive use of fertilizer, intensive cropping with high yielding cultivars have increased the food production and reduced the food shortage, but it has also brought in numerous problems of soil fertility, soil and water pollution. On the other hand, fast depletion of nutrients due to over exploitation, a wide-spread deficiency of N, P, K and S coupled with micro-nutrients deficiencies especially Zn and boron has been noticed in many soils. Further deforestation, shifting cultivation, burning of trees, bushes, grasses and cow dung, soil erosion, soil degradation, nutrient losses, excessive fertilizer application, leaching losses etc., have aggravated the depletion of soil fertility status. It is being realized that the future of Indian agriculture is closely related to scientific management of soil fertility along with judicious and efficient use of fertilizers. Soil fertility and nutrient management is one of the important factors that have a direct impact on crop yield and quality. Soil test reports help in determining soil organic matter, pH, electrical conductivity, cation exchange capacity, and levels of important macronutrients (phosphorus, potassium, calcium, magnesium) and micronutrients (boron, zinc, etc.). These reports also help estimating lime or sulphur application rates to increase or reduce soil pH, respectively. Maintaining a soil pH between 6.0 and 7.0 is recommended for most crop rotations that include vegetable crops.

Fertilizer is a substance of natural or synthetic origin, applied to soils or to plant tissues (usually leaves) for the supply of one or more nutrients essential to the plant. It is classified in two types, inorganic fertilizers and organic fertilizers. Both the fertilizers play major role to the crops if they are properly and appropriately applied. To obtain maximum benefits, it is important to apply fertilizers at an appropriate time, amount and in a precise manner. The method of fertilizer application should be selected appropriately taking into consideration the age and stage of crop plants, their root extensibility, type of orchard management, kind and amount of fertilizers to be applied. The fertilizers should be given over the area of crop plants, where their active roots are spread. In fruit trees, fertilizer should be given in restricted area i.e. in the surrounding area of about 1 to 1.5 m away from the trunk of the trees in active root zone.

When to apply the fertilizers?

Majority of the crops require nutrients at different stages like growth & development, flowering and fruit setting time. In fruit crops, stages like new flushes emergence, floral buds differentiation and fruit development require more nutrients. Time of application of fertilizers may also vary depending on types of fertilizers, need of the crops, soil and climate.

Many materials can be applied to the soil as source of plant nutrients but the term fertilizer is often used to refer to relatively soluble nutrient sources with a high analysis or concentration. Commercially available fertilizers supply essential elements in a variety of chemical forms but many are relatively simple inorganic salts. Advantages of commercial fertilizers are their high water solubility, immediate availability to the plants, high concentration and low price per unit of nutrient, and the uniformity and accuracy with which specific amounts of available nutrients can be applied. Since they are relatively homogeneous compounds of fixed and known composition, it is fairly easy to calculate precise application rates and attain relatively consistent performance. This is in contrast to organic nutrient sources, which are a much greater challenge to manage because of their variable composition, variable nutrient availability and patterns of nutrient release that are greatly affected by temperature, moisture and other conditions that alter biological activity.

The solubility of commercial fertilizers can sometimes be a problem since soluble nutrients may move out of farm fields when applied in excess or large rains occur soon after fertilizer application. Soluble nutrients can be lost by leaching on well-drained soils and through tile outlets or in runoff on poorly drained soils. Denitrification can cause large losses of nitrate-N from water-saturated soils in wet springs.

Increasing soil cation exchange capacity by increasing organic matter reduces the movement and loss of some nutrients, although not nitrate-N (an anion). Management practices that synchronize nutrient availability with crop demand and uptake also minimize losses. Both application timing and the amount of fertilizer applied are important. Splitting fertilizer application into several small applications rather than a single large one is especially important to limit nitrogen leaching on well-drained sandy soils. Split nitrogen applications can also reduce nitrogen losses in runoff or from denitrification on poorly drained soils. Excess nutrient applications can be eliminated or at least significantly reduced by soil testing on a regular basis, setting realistic yield goals and fertilizing accordingly, accounting for all nutrient sources such as legumes, manure and other amendments and using plant analysis as a monitoring tool for the fertilizer program.

Potato plays a vital role in food security for ever increasing world population (Thiele et al., 2010; Scott and Sourez, 2011; Scott and Sourez, 2012). It is highly capital and labour intensive crop (Kushwah and Singh, 2011). Presently, India is the second largest potato producer in the world. India is producing about 45-48 million tonnes of potato annually from about 2 million hectare of area. However, India would require 125 million metric tonnes of potato from 3.6 million hectare area in 2050 (Vision, 2050). The stagnating growth rates of cereals’ productivity, large scale diversion of food grains to feed & bio-fuel and expected steep rise in per capita consumption of pulses, edible oil, fruits, vegetables, milk, sugar and non-vegetarian food in the regime of steadily rising population is bound to put pressure on existing cultivable land. Since, cultivable land is expected to remain more or less constant in the next 40 years, the role of crops like potato having higher production potential per unit land and time will become imperative. In this context potato crop has very high probability of making crucial contribution to the future national food security agenda. The perceived changes in Indian socio-economics in the medium and long term are expected to enhance per capita food consumption of fresh potatoes.

Fertilizer and nutrient recommendations for different crops are mostly region specific and very general in nature which results into a blanket application of fertilizer leading to its poor efficacy and wastage of costly resources as well as of environmental pollution. In addition, this has caused severe imbalance of nutrients in soil. The spatial variability of available nutrients properly mapped along with other relevant parameters will help to develop site specific nutrient management practices with increased productivity and profitability apart from checking nutrient imbalance and environmental pollution.

ABSTRACT

Lack of high yielding varieties, variation among progenies through seedling propagation and transmission of viral diseases through sucker propagation together contribute to the decline in productivity of large cardamom (Amomum subulatum Roxb). To increase the productivity of this crop, planting material raised through tissue culture techniques from few selections having higher productivity was considered. From the study, it was revealed that TC plants were superior to conventionally propagated plants due to vigorous growth during juvenile phase, precocity in the yield and higher productivity compared to that of open pollinated seedlings.

1. UNIT OF CERTIFICATION

The entire area planted under seed production programme by an individual constitutes an unit, provided;

1. All the seed production programme is to produce seed of one category and one variety.
2. Area does not exceed 10 hectares and scattered fields constituting one unit (10 ha) should not be separated by more than 50 metres distance (Table 1).
3. The crop of the entire area is more or less of the same growth stage. The seed crop is grown as sole crop and it is not heavily and uniformly lodged.

1. INTRODUCTION

Vegetables differ widely from field crops in their requirements for land preparation and cultural practices because of their differences in their morphologies, growth habit, and socio-economic values. In preparing land for vegetable production, ecological location, mode of cropping, season, crop disposition and the type of vegetables to be grown are taken into consideration.

Clearing: It is often necessary to remove the vegetation cover when a piece of land is to be used for vegetable production. The land clearing methods may involve removing the remains of previous crops and undergrowth, cutting back the woody shrubs and trees and burning them.

Levelling: When the site has been cleared, uneven land may have to be leveled. This facilitates the process of ploughing, harrowing ridging and layout of the site.

Land preparation and layout depend on

Fig (Ficus carica  Linn.)  also called ‘Anjeer’ is a nutritive and delicious fruit. Its tree is native to western Asia. It is rich in calories (269), protein, and calcium (higher than milk), iron and fibre content. The small deciduous plants of fig are grown in different parts of the country. Fig has been cultivated since ancient period (4000 BC.) and well known through out the world. It is originated in Middle East and naturalized in many parts of the world. Fig tree plantations cover 426,244 ha. area in the world with an overall yield 1070676million tones. The largest fig growing countries are Turkey, Egypt, Iran, Greece and Algeria (Pasqual and Ferreira, 2007). It is also grown in some parts of Australia, California, New- Zealand and Argentina.

Stem-borer: Batocera rufomaculata, B. rubus, Olenecamptus bilobus:Cerambycidae

These are large dark brown adult beetles that lay eggs in loose bark.  Grubs bore into the trunk and make tunnels in branches and main trunks.  This causes drying and wilting of the branches. Adults of O. bilobus are pale whitish with long serrate antenna.
 
When bark is suspected to have the grubs, try mechanical removal of them. Paste the tree trunk with mud paste containing insecticides like chlorpyriphos or carbaryl. In endemic areas, spray the bark with Carbaryl 4gm /l, Malathion one ml/l, or Chlorpyriphos 2.5ml/l

The common fig, (Ficus carica L.) is a fruit of warm temperate zone. It is one of the oldest fruits known to man and is mentioned by well known Greek writers Homer and Plato. Mention about this fruit is in the earliest chapter of Bible. Figs belong to family Moraceae, which include many tropical fruits and ornamental species. The fruit is known botanically as ‘syconium’ in which the flowers are borne on the inner walls of a hollow receptacle. It is one of the most salt and drought tolerant amongst fruit trees. Fig is a moderate sized deciduous tree in subtropics but performs as evergreen in tropics. Branches are irregular, shoots develop at base of trunk, leaves are very broad, ovate and long stalked. Fruits mostly long stalked, pear shaped with a velvety or glabrous skin, yellow, brown, purplish or black in colour. 

1. Blast
Pyricularia grisea
Diagnostic Symptoms
• Crop is susceptible to the disease during all stages of its growth, from seedling to grain formation stage.
• In young seedlings, lesions are generally of spindle shaped, however lesions of different sizes may also be observed.
• In the beginning the spots have yellowish margin and grayish centre. Later, the centres become whitish grey and disintegrate.
• Lesions are isolated in the beginning and afterwards they may soon coalesce. The distal portion of the leaves beyond the lesions may hang and drop off.
• In older plants, the disease appears on leaf blades with typical spindle shaped spots.
• Under congenial conditions, such spots enlarge, coalesce and form bigger lesions.
• Lesions are like those on the seedlings and are about 0.3-0.5 cm in breadth and 1-2 cm in length. Apices of the infected leaves beyond the lesions hang down and sometimes break.
• Stem infection causes blackening of the nodal region, penetrating into the tissues.

ABSTRACT

Exploitation of genetic resistance available in the local germplasm provides a rational solution to most deadly purple blotch disease problem associated with onion production in India. Keeping this in view, efforts have been made to characterize the identified sources of resistance available in the local germplasm. Three lines namely, MS-65-268, PBR-287 and Arka Kalyan-704 that were identified as resistant after screening, were subjected to Random amplified polymorphic DNA (RAPD) analysis for their precise identification and estimation of genetic relationship among them. Highly susceptible variety Arka Niketan was also included in the study for better interpretation. A total of 160 ten- mer random primers were used in the analysis, out of which, 41 exhibited polymorphism among the accessions. Out of these DNA profile with 5 primers namely, OPB02, OPB13, OPC09, OPC12 and OPF08 distinguished the three resistant accessions clearly from the susceptible one. On an average of 2.65 polymorphic, 11.65 monomorphic and 14.3 total bands were produced per primer. The amplified PCR products were of the range from 300 bp to 2 kbp and were consistent, unambiguous and repeatable. Further genetic dissimilarity analysis based on the Ward’s method using minimum variance algorithm and Principal Component Analysis (PCA) of these genotypes using the data generated from RAPD markers revealed high genetic diversity. Dendrogram clustered these four genotypes into two main clusters containing two each. PCA also confirmed high genetic dissimilarity. The least genetic dissimilarity (40.0%) was between PBR-287 and MS-65-268 where as the maximum (65.0%) was found between genotypes Arka Niketan-709 and MS-65-268.

1. INTRODUCTION

Sensory science is the fundamental physiological and psychological underpinnings of sensory evaluation and includes our basic understanding of the mechanisms of taste and odour, kinesthetic and the various techniques of scaling and statistical analysis, whereas, sensory evaluation could unfold the application of this knowledge and the development of specific methods for the evaluation of the discriminative, descriptive and affective nature of products, in a problem-solving situation. When the Quantitative Descriptive Analysis (QDA) methodology was first described, it represented a decade of experimentation and study of the issue that were perceived at the time to be the impediments in solving “the problem of flavour characterization” Further, new developments and knowledge about sensory evaluation were beginning to have a positive effect on its acceptance by the food industry, but much more needed in be done if it is to contribute in a meaningful way. Today, it is indisputable that flavour is an important attribute affecting consumer acceptance of food and it is taste plus odour. The perception of taste is merely the detection of non-volatile tastants by the tongue while in other words, the perception of odour is the detection of odoriferous volatile aroma compounds by the olfactory nerves ending in the nose. The combination of all the possible flavour stimuli that could be encountered is as vast as the galaxy.

Flooding

Flooding affects both above and below ground ecosystem processes in greenhouses. Below-ground changes may be less obvious, they are as important as the above-ground changes. Soil microorganisms are sensitive to disturbance, and shifts in soil microbial community structure are expected when anaerobic conditions develop from flooding. The useful aerobic microbes are destroyed by flooding. It takes time to built-up their population in the soil to benefit plants. Due to anaerobic condition created by flooding in greenhouse plant roots in soil are not able to breath, function and hence wilting of plants occurs. Flood irrigation in excess create flood like condition in greenhouses at time. Excess water in soils is a major factor affecting plant survival and functioning. In saturated soils, the supply of atmospheric oxygen into the soil is curtailed and various facultative and obligate anaerobic microorganisms use oxidized compounds as electron acceptors for respiration, thus converting them to reduced forms. The reduction and the associated processes influence plant survival, growth and functioning in wetlands. Flood irrigation should always be just wet the soil not flood inviting stagnation of water.

A chain of reactions is initiated upon soil flooding leading to reduced soil redox potential conditions. These reactions include physical, chemical and biological processes that have significant implications on plants growth. Physical processes include restriction of atmospheric gas diffusion in the soil leading to depletion of soil oxygen and accumulation of carbon dioxide. Shortly after flooding, the limited supply of oxygen in soil pore spaces is depleted rapidly by roots, microorganisms, and soil reductants. This process leads to oxygen depletion and reduction in soil oxidation reduction potential followed by a chain of soil chemical changes. The processes that follow include denitrification, reduction of iron, manganese and sulphate, and changing soil pH

1. INFLORESCENCE

An inflorescence is a group or cluster of flowers arranged on a stem that is composed of a main branch or a complicated arrangement of branches.

1.1. Types of inflorescence

Inflorescences can be simple or compound.

1.1.1. Simple inflorescence

Inflorescence of sessile disc florets forming the capitulum

1.1.1.1. Indeterminate

Indeterminate simple inflorescences are generally called racemose. The main kind of racemose inflorescence is the raceme. The other kind of racemose inflorescences can all be derived from this one by dilation, compression, swelling or reduction of the different axes. Some passage forms between the obvious ones are commonly admitted.

USA ranks 17th in per capita cut flowers consumption.

India ranks 2nd in flower cultivation next to China.

India stands 14th in the world in exporting floricultural products, while the Netherlands and Columbia rank 1st and 2nd, respectively

Those plants which are completed their life cycle in a season or a year, is called annuals. Thre are many types of annuals.

1. On the basis of seasons:
   1. Rainy annuals: Balsam, Cock’s comb, Amaranths, Gaillardia, Torenia, Gompherena etc.
   2. Summer annuals: Zinnia, Kochia, Tithonia, Sunflower, Cosmos, Coreopsis.
   3. Winter annuals: Remaining annuals.

The scientific horticulture consists of the following divisions. Among them, which division has impact on environment aesthetically and functionally

A. Fruits         B. Flowers

C. Spices       D. Plantations

Floriculture is the aesthetic branch of horticulture which deals not only with the cultivation of ornamentals, annuals, biennials and perennial plants but also with their marketing. Flowers symbolize beauty, purity, peace and love. In India, it is a dynamic and expanding industry showing an impressive annual growth rate.

Classification of Flower Crops

The flowering plants can be classified broadly on the basis of their species, genus, family, plant part used or type of flower plants. They are further classified as cutflowers, cut foliage, turfgrasses, groundcovers, hedges, accents, specimen plants, avenue trees, screens, topiaries, fillers and others.

Flowers of the garden are brought indoors to enjoy the beauty. Fresh flowers are arranged in various styles according to one’s choice. There are two major and distinct styles of arranging fresh flowers, namely the European and the Japanese. Both the styles are greatly influenced by the place where they have been originated. Flowers are also dried and used for different arrangements. Fresh flowers are used as ornaments and also for making floral patterns on the floor called Rangoli.

1. INTRODUCTION AND IMPORTANCE

Flower arrangement is a very old art. In India, the flowers have been earlier arranged in temples and during festivities. The first rules of ikebana were laid down in Japan more than a thousand years ago. Flowers have been widely used for interior decoration, but they were cut from the garden and simply massed into water-filled containers to brighten the home. The beauty of the display relied upon the blooms themselves rather than the aesthetic appeal of the design. Even at homes and venues of festivals/functions/on auspicious occasions, flowers are used in a big way in the form of garlands, wall hangings, and floor decorations. Flower arrangements grace table tops, window sills, corners, fire places, and so on to suit the occasion.

Flower arrangement may be defined as the art of organizing and grouping together plant materials (flowers, foliage, fruits, twigs etc) to achieve harmony of form, colour and texture, thereby adding cheer, life and beauty to the surroundings.

Various types of arrangements are chosen, as appropriate to the area and occasion. Medium sized ‘round’ arrangements are often provided at the guest relations executives’ desk in the lobby and on coffee tables in the lounges. In most five-star hotels, one can see huge, spectacular arrangements in the loggies. Table arrangements for conferences must be low so that guests may see over them. At informal banquets, large arrangements may be seen. At wedding banquets, wall arrangements using gerberas are very popular, now a days. On special occasions and festivals, a large amount of flowers is required for making up various types of arrangements. The extent to which flowers are used in hotel interiors depends on the degree of luxury provided, the number of special functions held.

The housekeeper is responsible for all flower arrangements and their placement. Simple arrangements such as a bud in a vase can be done. Alternatively, flower arrangements may be provided on contract, in which case the arrangements are brought in and taken away at agreed times and little or no floral work is carried out on the premises. Arrangements like running water, containers, buckets, vases, scissors and flower pots are important.

Introduction

Flowers are the most fascinating objects in the world and many poems are written glorifying them. They are associated with mankind from the dawn of civilization. Flowers are an integral part of our day to day life and they find a place in worshiping, religious and social functions, wedding, interior decoration and self adornment. Flowers are used to convey the human feelings. To say it with flowers is very common in western culture. Emergence of a strong middle class and changing life style has created a great demand for cut flowers in India.

1. CUT FLOWERS

1.1. Common name, scientific name and family

1. FLOWERING

The flowering goes through a phase of vegetative growth producing more stems and leaves and a flowering phase where they produce the organs for sexual reproduction.

1.1. Synchronisation in flowering

Synchronous flowering refers to the phenomenon of coincident, simultaneous flowering of all population of a given species in a large region.

Description of the important flowering shrubs

Description of the important flowering trees

Description of the important foliage trees

Food additive is any chemical substance that is added to food during preparation or storage. A food additive either becomes a part of the food or affects its characteristics for achieving a particular effect. For instance, substances that are used to enhance the appearance, texture, or to keep qualities of a food are considered food additives.

20.1. Introduction

Food laws and regulations are the legal standards of quality which regulate the manufacture and marketing of food products. The major objectives of enacting the food laws and regulations are:

1. To maintain quality of food produced

2. To prevent exploitation of the consumer by the sellers

3. To safeguard the health of the consumers and

4. To establish a standard of quality for different food products.

Introduction
Food laws and regulations are the legal standards of quality that regulate the manufacture, storage, distribution, sale, and marketing of food products. The major objectives of enacting the food laws and regulations are i) to maintain the quality of food produced ii) to safeguard the health of the consumers iii) to prevent exploitation of the consumer by the sellers and iv) to establish a standard of quality for different food products. In 2006 the government of India enacted the Food Safety and Standards Act, 2006 (FSSA) to consolidate all laws relating to food and to establish the Food Safety and Standards Authority of India (FSSAI) for laying down science-based standards for different articles of food and to regulate their manufacture, storage, distribution, sale and import to ensure availability of safe and wholesome food for human consumption. Various food laws enacted in our country before 2006 for different categoriesof food were:
• PFA (The Prevention of Food Adulteration Act),1954 (Act 37 of 1954)
• FPO (Fruit Products Order),1955
• Meat Food Products (Control) Order,1973
• Vegetable Oil Products (Control) Order,1998
• The Edible Oil Packing (Regulations) Order,1998
• Solvent Extracted Oil, De-oiled Meal and Meal and Edible Flour (Control) Order,1967