eChapters

Principle: The copper in the Fehling solution is reduced to red, insoluble cuprous oxide in the presence of invert sugars like glucose and fructose. The quantity of sugars solution liquids for complete neutralization of a known quantity of Fehling mixture is determined by titration using methylene blue as the indicator.

(Lane and Eynon Method)

Thrips – Chaetanaphorothrips  orchidii, Thripidae: Thysanoptera

It is a polyphagous feeder that attacks other ornamentals, herbs, fruits, vegetables, grasses, and weeds, but shows preference for Anthurium species. It is a widely distributed species infesting green houses and out door landscapes.

Both adult and immature thrips start feeding within unopened Anthurium spathe. Damage appears as white streaks on the upper and lower surface of the spathe, resulting in deformed spathe and bronzing of the injured tissue with age. In severe cases, spathe  fails to open and the foliage may be deformed with streaming and bronzing and thereby reduced plant growth.

Chrysomelid beetle : Aulacophora foveicollis : ChrysomelidaeAphids : Macrosiphoniella  sanborni; Myzus  persicae; Brachicaudus  helichrysi; Aphis  gossypi; Aphis fabae; Aulocorthum circumflexum: Aphid

Chrysanthemum   is infested by different species of aphids. Aphids are small, soft bodied insects and their colour varies with species. Both nymphs and adults cluster on the growing stem tips and under surface of leaves. As a result, the plants show loss of vigor, distortion of leaves and flowers, yellowing, premature leaf fall and stunted growth. The damaged plants bear only undersized buds and they remain unopened. Peak damage period is November-December. Secretion of honeydew by the aphids favor development of sooty mould which hinders photosynthesis and the plants become stunted. They are also vectors of virus diseases.

Concept

Basic concept of this type of improvement is to accumulate, infuse and improve the frequency of favourable genes in established population. This includes the removal or substitution of an undesirable gene with a counterpart favourable one with the superior performance in a given environment, incorporation of a balanced gene combination for better performance - per se or may be even bringing in a better plant type congenial for better physiological activity and biochemical versatility, resulting in better performance of a population. As per theory of Hayes (1963), most of the commercial varieties/hybrids can be improved in one way or the other for one or more of the agronomic attributes. This is primarily because some of the lines in each hybrid generally excel in comparison with other in their ability to transmit desirable characters to their hybrid progeny and thus provide scope for the improvement of the weak inbred lines of the hybrid to further better its performance. The choice of the particular population improvement technique mainly depends upon the genetic information. Since by and large, population improvement techniques envisage controlled crossing followed by selection and recrossing by further selection. This information is vital. Therefore, before deciding upon the choice of a particular methodology, such information as the type of gene action involved in the expression of attribute under improvement, nature of genetic associations, extent of heritability, various possibilities of genetic manipulations should be available. Some of the procedures, which could be successfully utilized in population improvement of parents used in released hybrid populations, are backcross method of breeding, convergent improvement, gamete selection, technique for the removal of complementary genes and step ladder method of breeding.

Hard Red scale: Aonidiella aurantii :Diaspididae

Both adults and young scales suck the sap from the stem and cause spot yellowing and loss of vigour of the plant. Infested shoots bear reddish brown encrustations of the scale and in case of severe damage the shoots dry up.

Leaf Curl

Taphrina deformans

Disease Symptoms

• Initially yellowish to reddish areas appear on leaf blade of young leaves in the spring.

Leaf Spot

(Mycosphaerella fragariae teleomorph, Ramularia brunnea Peck anamorph)?

Disease Symptoms

• Older leaves usually show purple spots (3-6 mm in diameter) on the upper surface, sometimes with a slightly darker halo

Botany

Cauliflower is highly cross pollinated crop due to self incompatibility. Flower is protogynous in nature. Stigma remains receptive 5 days before and 4 days after opening of the flower. The time taken from pollination to fertilization is 248 hours depending upon the temperature. The optimum temperature for fertilization and seed development is 12°C – 18°C. Bees are the major pollinators.

Method of seed production: There are two methods of seed production

1. in situ method (seed to seed method)
2. Transplanting method (Head to seed method)

For seed production, seed to seed method is recommended since the head to seed method in India has not been very successful. In seed to seed method (In situ method) the crop is allowed to over winter and produce seed in the original position, where they are first planted in the seedling stage.

Hog-plum also known as wild mango (Spondias pinnata), is native to tropical Asia. A small, aromatic deciduous tree, up to 27m height and 2.5m in girth, with a clear bole of 16m, is found wild or cultivated almost throughout India, ascending up to an altitude of 1500m in the Himalayas; also found in the Andamans. Bark thick, aromatic, smooth, grey; leaves imparipinnate, 20-60cm long, leaflets 5-11, 22-28cm long, ovate-oblong, elliptic or elliptic-oblong, more or less oblique with mango-like smell; flowers whitish or greenish white, polygamous, in large, terminal panicles; fruits in terminal clusters of 10-15, drupes yellow-green or rich olive-green, mottled with yellow and black, smooth, ovoid, 4-7cm long; seeds 1-3, one being perfect, oblong-elliptic. Fruit is extremely sour, even when completely ripe.

27.1 Introduction

Crop improvement depends on genetic variation present in nature or created by hybridization followed by segregation and recombination. Again, gene transfers are possible only from the lines and species that are sexually compatible with the concerned species. Interspecific gene transfers pose many problems, including the loss of F₁ hybrids during embryo development due to abortion of the endosperm in the developing hybrid seeds. Embryo rescue technique was developed to rescue such interspecific hybrid embryos, and it has been widely used for this purpose. It is to be mentioned that embryo rescue can be used only in such cases where sexual hybridization is successful in producing zygotes that begin to develop into embryos.

Besides, the technique of somatic hybridization by protoplast fusion was developed to enable gene transfer from the species that do not produce zygotes on hybridization. This method has been extensively used and some useful lines have been derived. But this method is limited to utilization of genes present in plant species. Again, the results of somatic hybridization are unpredictable since many somatic hybrids fail to regenerate complete plants and the transfer of specific genes or groups of genes depends entirely on chance.

The recombinant DNA technology (also called genetic engineering) has permitted the transfer of genes from any organism into any organism. Besides, chemically synthesized genes can be transferred and integrated into genomes of various organisms to enable the expression of these genes. A gene transferred into an organism by genetic engineering is called a transgene. 

FRUIT TOFFEES

Fruit toffees can be prepared from different fruits like apricot, plum, apple and other fruits. Concentrate the fruit pulp to about half of its volume by cooking with sugar and other ingredients. Milk powder should be added in the form of paste. Heavy stirring is required till it hardens enough on cooling.

ABSTRACT

The coastal ecosystem happens to be one of the most productive ecosystems. This ecosystem has been under different kinds of threats such as climate change and consequent rise in sea level, increase in population and depletion of natural resources. All this has given rise to an increase in the level of abiotic stresses such as salinity, alkalinity, and drought affecting the agricultural productivity in the coastal region. Salinization is posing an increasing problem in coastal and agricultural areas reducing plant productivity and yield. Salinity is one of the major abiotic stresses decreasing the plant productivity.

Salinity is a significant factor limiting agricultural productivity and affecting about 9x 10⁸ hectares worldwide. Poor quality of water for irrigation and current unsustainable irrigation practices has significantly resulted in salinization and other forms of soil damage. About one third of all irrigated land is affected by salt due to secondary salinization. It is estimated that 50% of all arable land will be salinized by the year 2050. The problem of secondary salinization is also becoming more serious as it represents loss of highly productive lands. Added to this is the problem of coastal salinity where intrusion of seawater into arable land due to erosion of coastal habitat has rendered it unsuitable for cultivation. Salt-affected soils (~11 million ha in South and Southeast Asia) are found along coastlines or in inland areas where evaporation is greater than precipitation.

Botrytis Gray Mould

Diagnostic Symptoms

• Appearance of a gray, fuzzy mold on flowers, leaves or stems of or plants. Also called, “gray mold”.

EXPERIMENT

TECHNOLOGY FOR EXTRACTION OF KERNEL OIL FROM STONE FRUITS

Apricot, peach, plum, cherries, nectarines etc are the important stone fruits belonging to the family Rosaceae. These fruits are known to contain stones/pits i.e., apricot (6.0-11.5%), peach (7.5-11.5%), plum (4.5-7.0%) and these stones are reported to contain kernels (%) apricot (28.0-32.0%), peach (5.7-5.9%), plum (10.0-20.8%), almond (28.0-30.0%). These kernels can yield an oil yield of (42.5-45.5%), (38.5-41.5%), (39.2-40.6%) and (52.0-58.9%), respectively. Thus, these stone fruit kernels can be utilized for extraction of kernel oil by using the improved technology developed for extraction of oil. The developed technology consists of mechanical decortication of stones by the use of mechanical decorticator, kernel separation by using specific gravity separation technique, oil extraction by using table oil expeller and oil filtration through oil filter press followed by packing in PET bottles and PE pouches.

Mechanical decorticator: The mechanical decorticator is a type of roller crusher consisting of two rollers moving in inward opposite directions with the help of 3 HP motor and is provided with a hopper and feeder assembly. The clearance between two rollers is adjusted according to the respective size of stones.

Table oil expeller: Oil expeller is a 24 patti screw type oil expeller driven by 7HP motor, in which the kernels are fed into the moving hopper at pre-determined flow rate, which are pressed in between rollers (worm) and side walls of the expeller. The kernels are then, passed through the expeller 3-4 times until a thin slice of press cake is obtained.

Physiological plant disorder is caused by non-pathological conditions such as poor light, weather damage, waterlogging or lack of nutrients affect the operation of the system caused. Physiological condition selected from diseases caused by plant pathogens such as viruses or fungi to distinguish. Although the physiological disorder symptoms may occur such as disease, they can often be prevented by changes in environmental conditions. However, once the nutritional deficiencies of plants showing symptoms, is likely to return that season yield will be reduced.

6.1 INTRODUCTION

The ultimate success of an orchard enterprise largely depends upon the quality and genuineness of planting materials as nursery plants are the foundation of the orchard. Fruit crops, mostly being perennial in nature, call for utmost care in selection of cultivar, quality planting material and adoption of right technology for mass multiplication of planting material. Mistakes committed during the initial establishment of orchards cannot be corrected and will cause serious damage to production and productivity. The variation of scion-wood and rootstock has great bearing on the productivity of an orchard. Thus, it is of immense importance having all plants carefully labelled or otherwise marked. Cuttings taken from the mother plant will grow to have the same genetic qualities as the original plant. This is why the plants resulting from these cuttings are called “clones”. When a stem cutting is taken from a mother plant, the piece of stem will produce new roots if it is properly hydrated. Additionally, some plants can be grown from leaf pieces, or leaf cuttings and these will produce both stems and roots.

Thus, the progeny trees are the basic component for the multiplication of fruit plants and ultimately deciding the quality and productivity of the fruit crops. Hence, it is necessary to stock the true to type and best quality progeny trees.

In asexual methods of plant propagation, plant parts are being used as propagating materials. The plant from which the plant parts are collected is known as mother plant. There is every possibility of transmission of disease or pest which is present in the mother plant to the progeny. The mother plants have to be maintained properly to obtain disease free planting materials so that multiplication of disease/pest can be prevented. Thus, there is a need for the establishment of mother plant block/scion banks.

Agriculture has been the base of human livelihood since ancient time when the man started planting of seeds of some edible plants now called Agricultural crops. Domestication of food plants and animals was started with the development of human civilization. Thus agriculture can be explained as science and technology of growing food crops and rearing of animals. Still in several countries of the world, most of population is based on agriculture for their livelihood particularly in rural areas of that country. According to Williams and Haq (2002) there are over 7000 species of plants that can be used for food. The edible plants species grown for food are called agricultural crops. The crops grown in garden are known as garden cops or Horticulture crops. Horticulture is a branch of agriculture, which deals with intensive cultivation of garden crops such as fruits, vegetables, f lowers, ornamental plants, plantation crops, spices, medicinal and aromatic plants, and mushroom. It also deals with post-harvest technology of horticultural crops. Processing and Preservation of fruits and vegetables is a part of Post-harvest Technology of horticultural crops which deals with methods of processing and preservation of these crops to extend the shelf life of fruits and vegetables after harvesting.

All horticultural crops have their own importance in our society. Fruits, vegetables and spices are major ingredients of our meal. Spices add taste and flavor to our food and also have high medicinal values. Flowers and ornamental plants are used for decoration of environment and landscape. Aromatic and plantation crops have become industrial crops. Mushroom growing is a great enterprise. Among these crops fruits and vegetables are major crops and have been considered presently as highly economical and important food crops. There are 1200 crop species are used for vegetable purpose in the world (Hazra and Som, 2006). Fruits and vegetables are richest and cheapest source of all essential nutrients (carbohydrates, fat, protein, vitamins and minerals) required by our body for proper functioning of body organs and maintaining good health. Besides these nutrients they also supply water and fibers to our body which play vital roles in our body. Fruits and vegetables have important place in our daily diet and based on survey made by experts FAO WHO (2003) has recommended 400 g/capita/day of fruit and vegetables (fruits -100 g/capita/day and vegetables -300 g/capita/day) to be consumed for good health and prevent chronic diseases. Therefore, the demand of these food commodities has increased in the modern society due to increased awareness of the nutritional importance of fruits and vegetables. So that people must be aware that what part of fruit and vegetable is to be consumed?

Growth: Growth involve cell division subsequently cell elongation. Increase in volume that is associated with fruit growth largely result of cell division or cell elongation or both. In some fruit such as apple, extension of intercellular space may also contribute the growth. Generally growth by cell division in early stage whereas, cell elongation during later stage.

Two distinct type of growth curve are observed when increase in such variable such as fresh weight, volume and dry weight of fruit.

1. Single sigmoid curve
2. Double sigmoid curve

In case of single sigmoid growth curve firstly there is rapid increase in size then after decline so there is only one rapid growth is observed e.g. Apple, pear, tomato, cucumber and strawberry.

In case of double sigmoid two rapid growth period are separated by an intermediate period that is less growth or no increasing growth curve. Double sigmoid growth curve can be used as two successive sigmoid curve thus there are three clearly define stage of growth.

Enzymes are biocatalysts that change the rate of reaction without being changed themselves. All (Most) enzymes are proteins but all proteins are not enzymes. Ribonuclease is the enzyme which is non- protein in nature.

Properties of Enzymes

Before beginning the actual work on the establishment of a Fruit and Vegetable Processing Industry the following points should be considered:

Availability and possibilities of obtaining Funds: Investment of own money or obtaining loans from banks etc.

The scale of industry (Large, Small, Cottage or Home): Has to be decided based on availability of raw material, funds availability, land, labour and other resources.

The location: The processing unit should be located near to the actual production site of raw material so that the transportation costs of high bulk raw materials is reduced. There is no fun or justification of establishing apple processing industry in Lucknow or Bangalore and mango processing industry in Shimla as the related raw materials would have to be transported through long distances.

Site: Site selected in the location should be sunny area free from dampness and sufficient space for waste disposal should be ensured.