eChapters

29.1 INTRODUCTION

Some historians believe that it was women who first domesticated crop plants and thereby initiated the art and science of farming. While men went out hunting in search of food, women started collecting seeds from the native flora and began cultivating those of interest from the point of view of food, feed, fodder, fibre and fuel. This view is strengthened by the fact that women have been traditionally seed selectors. Even today this tradition has continued in many parts of the developing world. Women have played and continue to play a pivotal role in the conservation of basic life support system such as land, water, flora and fauna. They have protected the health of the soil through organic recycling and promoted crop security through the maintenance of varietal diversity and genetic resistance. In many hill and remote areas of developing countries such as Himalyan region, agriculture is largely in hands of women. Men tend to go to towns and cities in search of salaried jobs for fulfilment of family income. Therefore, without total intellectual and physical participation of women, it will not be possible to popularize alternative systems of land management for shifting cultivation, arrest gene and soil erosion, and promote the care of the soil and the health of economic plants and farm animals. Women also tend to look at problems in their totality from the sowing of the crop to its ultimate utilization either as food, feed or raw material for industry. Since they are usually involved in of marketing, they generally possess a clear understanding of market preferences and prejudices. Therefore, for an economically and ecologically sustainable agriculture the involvement of women farmers and farm women (agriculture farmers with and without assets) in the process of modernization of farming practices and village industries is absolutely essential. Horticulture is a major part of Indian agriculture. Although belated, their importance has now been recognized in India not only to provide the much needed balanced nutrition and gainful occupation to our populace but also to develop viable internal and export trade. Fruits like banana and vegetables like potato being energy rich are considered prominent food crops e.g. banana can produce as high as 37 million calories per hectare. Unfortunately the component of fruits and vegetables in Indian diet is hardly six per cent which should be raised at least five times so that the per capita per day consumption mathches the recommended dose of 85g. fruits, 75 – 125g. leafy vegetables 85g. other vegetable and 85g. roots and tubers. To achieve this present production of fruits and vegetables would need to be pushed up considerably by increasing the production levels and the area both.

28.1 INTRODUCTION

Precision Farming has assumed great significance in the country for making the use of available resources more judiciously and efficiently. It is farm management strategy which utilizes precise information to increase profit and to reduce enviornmental impact. It takes into account in field variability in soil fertility and crop conditions. In nutshell, it may be defined as management of input variables such as application rates, cultivars selections, tillage practices, irrigation scheduling, optimization of soil and plant nutrient through nutrient management practices and management of pest and diseases by reducing the quantities of pesticides. Development of new technologies has become integral part of precision farming.

Precision farming was widely accepted firstly as a management practice in corn belt of mid west United States of America which helped in increasing the yield and significant reduction in production costs. Besides, crops like wheat and soybean have also been included in its purview. In south east parts of U.S.A., research is currently on in the crops of citrus, cotton, groundnut, vegetables and even livestock. Precision farming management practices have also integrated controlling and monitoring of field information using geographical information system (GIS), Global Positioning System (GPS), sensors, Variable Rate Technology (VRT) and yield monitoring. These components are highly sophisticated. GIS software stores data pertaining to soil type, nutrient levels etc in layers and assign that information to the particular field location. It can also be used to analyze characteristics between layers to develop application maps or other management options. Global Positioning System is a referencing device capable of identifying sites within a field. Global positioning system (GPS) helps in storing information regarding field location in terms of latitude and longitude. Maps showing variability of nutrient levels soil types, topography, pest incidence and yield can be created by virtue of it. It is a set of 24 satellites in high altitude orbit above the earth for pin pointing objects on the surface of the earth. These satellites continuously transmit radio signals which are picked up and deciphered by special receivers. A GPS receiver requires at least four satellites to determine its position on earth. Receivers are mounted on tractors/top of cab or on some high point to get a clear view of the spy. Crop stress, soil properties, pest incidence etc. are determined by the help of sensors through traveling over the field by tractors or combine. These can be used for measurement of soil conductivity, fertility status, weeds etc. Another type of sensor viz Remote sensors (aerial/ satellite) can provide instead maps of field conditions. Computer control device and associated hardware are part of Variable Rate Technology (VRT) for application of fertilizers, pesticides etc on the basis of field characteristics of the specific location. In precision farming, information is needed about mean characteristics of small, relatively homogenous management zones. It is data acquisition of the farms to find the soil, vegetation and other parameters which are amenable to remote sensing. Remote sensing techniques are helpful in providing continuous acquired data of agricultural crops. Remote sensors image vegetation growing on different soil types with different water availability. The following applications can be made by relief sensors:

27.1 INTRODUCTION

In India, the horticulture sector contributes around 29 per cent of the GDP and 37 per cent of the total exports of agricultural commodities from about 13.08% of area. India has been placed as the second largest producer of fruits and vegetables; largest producer and consumer of cashew nut, tea, spices; third largest producer of coconut; fourth largest producer and consumer of rubber and sixth largest producer of coffee in the world. Several new programmes area in operation and significant developments in area expansion, production, value-addition and exports have taken place. Today, as a result of better synergy between research agencies, technological and policy initiatives by the governmental agencies, proactive participation of private players and higher degree of diversification to horticulture, this sector has emerged as a sustainable and viable proposition for even the small and marginal farmers including different stakeholders in the commodity chain. In spite of the remarkable progress made in the horticulture Sector in India, there is lot of scope in improvement in safety and quality aspects of horticultural produce.

The concept of biosafety encompasses a range of measures, policies and procedures for minimizing potential risks likely to appear to the environment and human health. Such safeguards must be put in place now. Biosafety is currently being promoted in a variety of ways by industry, governments and civil society. Quality and safety become prime concern because most of the horticultural produce are consumed daily in fresh, cooked and processed form and contribute major share in our daily diet. To ensure biosafety and quality of horticultural produce we need to ensure: a)Supply of quality inputs, b)Adoption of good cultural practices, c) Handling and processing of horticultural produce in scientific /hygienic manner, d)Packing, storage, transportation and delivery etc. in such a way that it reaches at consumers’ table without deteriorating the quality.

To ensure such aspects various preventive and certification measures have been initiated by government and certification agencies all over the globe including India , such as prevention of Food Adulteration Act 1954, Agricultural Produce Marketing Act, 1937, Food Safety Standards Association of India (FSSAI), Food Safety System Certification (FSSC:2200), International Food Certification (IFC), Food Chain Traceability, Hazard Analysis and Critical Control Point (HACCP), Food Product Orders (FPO), etc. The major emphasis under these certifications/regulations is to ensure quality and safety of the produce and minimize the risks by reducing the biological, chemical, physical hazards like microorganism contamination, level of heavy metal/chemicals/ drugs beyond the critical limits, residual effects of toxic substances etc. Brief of a few certification/regulations are listed below.

26.1 INTRODUCTION

India is the second largest producer of fruits and vegetables and ranks next to Brazil and China, respectively. With the commensurate total production of 63.5 and 87.2 million tonnes of fruits and vegetables, the country shares about 11 per cent of total production under fruits and 13 per cent of total production under vegetables, respectively (Anon., 2008) in global scenario. Horticultural produce undergoes spoilage at the time of harvesting, handling, storage, marketing and processing resulting in huge wastage. Efficient management of this waste can help preserving essential nutrients of our food and feeds and bringing down the production cost of processed product, besides minimizing pollution hazards and purifying the environmental condition. Recycling of horticultural waste is one of the most important aspects of utilizing it in a number of new ways to yield new products and meeting the requirements of essential products required to mankind.

In advance countries like USA, Australia, Brazil and Israel, more than 50 per cent of fruits and vegetables productions are processed into different products, whereas, in India it is less than 2.0 per cent of total production. Generally, post harvest losses in fruits and vegetables range between 25-30 per cent of total production, valued at more than 57,000 crores annually due to lack of availability of appropriate post harvest infrastructure (Guleria and Verma, 2008). Horticultural crops are grown all over the country incurring wastes everywhere. There are different stages of waste from farm to fork.

25.1 INTRODUCTION

With the natures gift, consciously or unconsciously human select the best among the lot based on sensual judgment. Warnings about the dangers of the excessive use of the chemicals for the human health and biodiversity have been well reported over the years. The world health organization estimates the occurrence of some more than 25 million cases of excessive chemical use slow poisoning globally each year (Anon, 2010). In developing countries, sulphur and chlorine based formulations are often used for post-harvest treatments of horticultural produce. Recently, some bio-based and other safe post-harvest treatment materials have been formulated for loss reduction and shelf-life extension of fresh fruits. In this article, the recent and safe materials/agents for postharvest treatments are discussed.

25.2 MATERIALS FOR POST–HARVEST TREATMENTS

25.2.1 Polyamines

Polyamines (PAs) are low molecular weight small aliphatic amines that are ubiquitous in living organisms and have been implicated in a wide range of biological processes, including plant growth, development and response to stress (Smith, 1985). In plants, they have been implicated in a wide range of biological processes, including growth, development and abiotic stress responses. The most common polyamines are Putrescine (PUT), Spermidine (SPD) and Spermine (SPM) found in every plant cell in titers ranging from approximately micromolar to millimolar, together with the enzymes regulating their metabolism and depend greatly on environmental conditions, especially stress.

24.1 INTRODUCTION

Citrus fruits occupy third position after mango and banana in the country and ranks 6^th in the world citrus production. The productivity, however, is only about 40 percent of that in Spain, Brazil, USA or Japan (8.4 t/ha) only. Of the total production, mandarin contributes more than that of sweet orange in which major chunk of 57.72 per cent was shared by Maharashtra, followed by 19.81 per cent by Madhya Pradesh state. At present, the Brazil is the largest producer of citrus, followed by USA. There are number of issues which need to be addressed to make fruit quality comparable to the international standards. Post harvest losses of fruits are also enormous mainly due to unscientific method of harvesting, lack of utilization of post-harvest handling techniques due to which 25 - 30 per cent losses occur in developing countries in comparison to 5 - 10 per cent in developed countries. Synergistic effect of pre-harvest practices and post harvest handling is the key to get the fruit of high quality and enhanced shelf life.

Recent trends are emerging as use of less chemicals and Good Agricultural Practices (GAP) during cultivation. Maintenance of quality standards and regulations up to retail market level is of utmost importance. Whereas, in marketing sector, now-a-days participation of private players on large scale in retail marketing of produce is noticed.

Value chains have become the centre of considerable academic and practical interests. Part of the reason for the rapidly growing interest in value chains in the citrus sector has been the result of changes in global retailing. In a large number of countries, supermarkets chains now dominate food retailing. Supermarkets have increasingly integrated their operations involving many aspects of the post farm gate operations. Value chain management is one of these. Some identified issues relates to supply chain bottlenecks resulting in farmers experiencing gluts of commodities, processors not being able to procure sufficient raw materials for their plants, retailers not getting sufficient products to meet the demand of consumers, and exporters are unable to meet foreign consumer requirements. Lack of innovation that affects the entire chain, an example being the introduction of plastic crates for a fruit processor involves a vast number of actors in the chain to coordinate their efforts.

23.1 INTRODUCTION

Mandarin oranges are the most popular among the citrus fruits and alone occupy more than 50% share under widely divergent citrus crops grown across the globe. In India, oranges have a place of prominence among fruit kind after mango and banana. It’s delicious, relishing, nutritious and handy fruits offer best mouth feel especially during summer when other fruits fail to quench thirst of throat. There is a need of scientific handling so as to accentuate trade and to exploit market potential of mandarin fruit.

Country wide, orange covers an area of 5.02 lakh hectares and the production is of the order of 43.96 lakh tonnes accounting for 12.03% and 6.40 % share under total acreage and production respectively in the fruits (Anon., 2010). Orange’s production in developed countries is projected to grow at an annualized rate of 0.6 per cent and that in developing country at 0.8 per cent.

In Rajasthan, ‘Nagpur’ mandarin and ‘Kinnow’ fruits occupy a place of prominence among various citrus crops grown. Cultivation of ‘Nagpur’ mandarin is mainly concentrated to Jhalawar district where it covers about 6040 ha area producing 87586 tons fruits, annually. After the implementation of National Horticulture Mission the area is further increasing steadily in the district.

22.1 INTRODUCTION

The life-styles, economic conditions and food habits have a great effect on food marketing. There is an increasing demand for fresh fruits and vegetables and their processed products. Fruits and vegetables are processed into a variety of products and it is required to be picked at its right stage. For making juice, fruits should be picked at ripe and soft stage, for canning purpose it should be picked at fully mature but firm just before ripe stage. Fruits and vegetables are passed through a long channel before their consumption; which may lead to a number of undesirable changes in their composition. Thus effective post harvest management of fruits and vegetables is essential to provide their acceptable quantity and quality worth consumption. In this regard handling, processing and preservation and value additions form important loci.

21.1 INTRODUCTION

High population pressure has forced us to plough 46 per cent of our country area for food production. The present productivity is 12.36 tonnes/ha of fruits needs to be raised to 40.0 tonnes/ha by using N : P₂O₅: K₂O with other inputs, since recommended ratio is 0.75:0.50:1.00 only.

Since cost of the inputs like fertilizers and manures are very high, hence, efficient nutrient management is essential for sustainable fruit production and protection of the environment from different types of hazards occurring due to misuse of costly fertilizers.

The soils of India and especially of arid and semi-arid regions are impoverished to plant nutrients. Considering economy, energy and environment, it is imperative to use nutrients effectively by adopting the appropriate doses proper, placement and correct timings of application and to sustain the available nutrients in soil at the optimum level.

20.1 INTRODUCTION

With rapid increase in area under micro irrigation, now fertigation is getting momentum in many states in the country. At present, most of the soluble fertilizers are imported in the country. Hence, these are very expensive and beyond the reach of common farmers. It is interesting to record that for number of nutrients, which are becoming constraints in most of the Indian soils, soluble formulations have yet to be developed. This calls for some alternative options. As an alternatives liquid manures like cow urine, biogas slurry, or fermented manures etc can be sprinkled on the soil, applied with irrigation water or diluted and sprayed as foliar fertilizers (Frank et al; 2005).To our understanding, organic fertilizers /organic liquid manures referred now as bio-enhancers are essential to maintain the activity of microorganisms and other life forms in the soil. These are prepared locally, can resolve number of apprehensions and will be helpful in boosting production and mitigating number of nutritional disorders in most of soils and crops. It is interesting to record that these can be prepared at the farm with some infrastructure facilities and hands on training. Most of these formulations are used through irrigation. These organisms (bacteria and moulds) improve the soil health by solubilzing the complex organic substrates into simple forms and make it available to the plant, resulting in increased productivity. If these are integrated with micro irrigation techniques after proper filtration their efficacy can further be improved.

Cow dung and urine are important component in organic farming. Cow dung is rich source of microbial consortia Actinomycetes, which are helpful in control of many plant diseases. A potential species Streptosporangium psedovulgare of Actinomycetes and four strains of Bacillus subtalis have been identified at CISH, Lucknow (Pathak et.al., 2009).These showed anti pathogenic potential against anthracnose gummosis, stem end rot and dieback pathogens. These were observed to attack mycelia cell wall and finally the host cell degenerates completely. Organic liquid manures play a key role in promoting growth and providing immunity to plant system ( Sreenivasa et al., 2010).

19.1 INTRODUCTION

Indiscriminate use of agro-chemicals over the last five decades has adversely affected soil fertility, crop productivity, produce quality and particularly the environment. These degenerative effects of intensive agriculture have compelled to think for alternative and sustainable system of agriculture. As a result, number of alternative systems viz Biodynamic, Rishi Krishi, Panchagavya Krishi, Natueco Organic Farming, Homa Organic Farming, Natural Farming and Jaivik Krishi have emerged in different parts of the country. In organic farming production is achieved without use of chemical input (Singh, 2011 and Malik, 2000). In these systems, maximum reliance is placed on self-regulatory agro systems and locally available or farm derived renewable resources. Since the soil, water and environment have been contaminated, hence even organic production techniques once effective are now are not capable of mitigating these issues. This has created number of myths in the mind of policy makers and even large number of farmers.

18.1 INTRODUCTION

Organic farming systems have attracted increasing attention over the last one decade because they are perceived to offer some solutions to the problems currently besetting the agricultural sector. In the western world, organic farming is catching fast (Malik, 2000). Indiscrimpte use of chemical fertilizers, herbicides and pesticides have resulted in environmental and health hazards along with socio-economic problems (Padmadevi, et al., 2008). India is bestowed with lot of potential to produce all varieties of organic products due to its diverse agro-climatic regions. In several parts of the country, the inherited tradition of organic farming is an added advantage. Organic farming is necessary to attain the goal of sustainable development. According to the Food and Agriculture Organization (FAO), sustainable agriculture “is the successful management of resources for agriculture to satisfy changing human needs while maintaining or enhancing the quality of environment and conserving natural resources”. All definitions of sustainable agriculture lay great emphasis on maintaining an agriculture growth rate, which can meet the demand for food of all living things without draining the basic resources. Organic farming is one of the several approaches found to meet the objectives of sustainable agriculture. Many techniques used in organic farming like intercropping, mulching and integration of crops and livestock are not alien to various agriculture systems including the traditional agriculture practised in countries like India. However, organic farming is based on various laws and certification programmes, which prohibit the use of almost all synthetic inputs, treated seeds and health of the soil is recognized as the central theme of the method. Adverse effects of modern agricultural practices on the farm resources and health and over all survival of living being have been well documented all over the world. Application of technology, particularly in terms of the use of chemical fertilizers and pesticides has been serious concern. Their negative effects on the environment are manifested through soil erosion, water shortages, salination, soil contamination, genetic erosion, etc. Organic farming has the potential to provide benefits in terms of environmental protection, conservation of non-renewable resources and improved food quality. It is very important to maintain long term soil biological activity, ensure effective peak management, recycle wastes to return nutrients to the land, provide attentive care for farm animals and handle the agricultural products without the use of extraneous synthetic additives or processing in accordance with largely acceptable standard and applicable standards of destination country/ countries. Organic farming has several advantages over the conventional one apart, from the protection of both the environment and human health. Improved soil fertility, better water quality, prevention of soil erosion, generation of rural employment, etc. are some of them.

17.1 INTRODUCTION

Flower consumption is growing at an alarming rate of 20 per cent per annum at global level and India is, today, one of the world’s largest consumer base and fastest growing retail destinations. Commercial floriculture is today a potential money-spinner and an economically viable agri-business.

Cut flower trade in terms of export oriented units dealing with rose and gerbera is flourishing. Other cut flowers like gladiolus, tuberose, lilum, chrysanthemum, etc. are also being cultivated along with traditional loose flowers like jasmine, rose, crossendra, marigold on a higher scale. However, growing awareness of Indian consumers and popularity for cut flowers is creating demand for diversified flower crops. Further, trade of some flowers in the market is responsible for gluts. Thus, there is an urgent need to diversify the floriculture industry by introducing and adoption of anthurium as a cut flower with unique shape and high longevity.

Precision farming is an advanced approach for the flower growers to enhance their income. It mainly includes information and technology of farm management system to identify, analyze and manage variability within fields for optimum profitability, sustainability and protection of the land resource. Precision farming is applied for increasing efficiencies that can be realized by understanding and dealing with the natural variability found within a field.

Anthurium is taking a good place in market with high value. Farmers are undertaking anthurium cultivation and in this direction, precise farming technology will help the farmers to grow the crop with good quality and higher production per unit area.

16.1 INTRODUCTION

The world floriculture business has reached to almost over a $ 40 billion mark. It is continuously going through the rapid transitional changes to have more unique and competitive products of wide choice to the consumers. Netherland is ahead in floriculture trade. Throughout the year, a large number of ornamental commodities are imported in Holland and exported back to the countries for its retail and consumption mostly to the countries in the Gulf, Middle-East Asia and America. According to the statistical estimates worldwide, a large quantity is consumed in US and the other countries. For an example, the US alone consumes 100 lacs of cut flowers a day and approximately 4000 lacs every year, though it ranks only 17^th in per capita cut-flower consumption. The average Swiss spends Rs 4500 a year on flowers, nearly four times than that spent by the average American besides the fact that the consumption of fresh cut flower and foliage plant is on manifold increase every year resulting in the competition worldwide for growing of exportable eco-friendly products. At the same time there is great environmental consciousness towards transforming floriculture with “natural and unspoiled” system of having the exportable produce into a mass and its ease to transport to any distant market. The system relies greatly on the industry with extensive network of breeders, greenhouse managers, field workers, auction houses, sales representatives, shippers, and florists to offer consumers a variety of choices matching their taste. This is the fact that in the recent times, the commercial growers don’t rely on the nature to introduce the genetic mutation that will make them millionaires but depends on the art and scientific knowhow to create a novelty in its own. This has resulted in the seriousness and painstaking effort of the growers to produce the plants in new forms and shape to put forward a new plant with extra-ordinary marketable characteristics every year, e.g. compact chrysanthemum, kalanchoe, bromeliads, orchids, etc (Plate1) are some of the common products with an unusual and eye-catching hue in the European markets. Similarly, the consumers can purchase gerberas with blooms as wide as salad plates and roses with yard-long stems perfectly suited for valentine-day gifts which mainly they get produced under the specific and artificial environment created for a specific growth stages of the plant.

15.1 INTRODUCTION

Vegetables are rich sources of many essential micronutrients, including vitamin C, vitamin K, folate, thiamine, carotenes, minerals, and dietary fibre. In addition, vegetables are rich in health related phytochemicals, such as antioxidants. Such phytochemicals play an important role in reducing the risk of many chronic diseases. Therefore, it is essential to produce more vegetables to feed our ever growing population. In this context, use of genetically improved, disease resistant and high yielding varieties in precision farming may play a significant role in increasing vegetable productivity and production.

15.2 EXPLOITATION OF GENETIC RESOURCES

The genetic resources of a crop may be defined as the sum total of hereditary material, i.e., all the alleles of various genes present in a crop species and its wild relatives. Genetic resources are broadly grouped into two major types (i) cultivated germplasm, and (ii) wild germplasm. Alternatively, they may be termed as (i) indigenous (from the country in question), or (ii) exotic (from another country) based on their place of origin. Genetic resources consist the following five types of materials: (1) land races, (2) obsolete varieties, (3) modern varieties or varieties in cultivation, (4) breeding lines, and (5) wild forms and wild relatives.

14.1 INTRODUCTION

The efforts for harnessing the natural resources for sustainining the human race have been ‘on’ since the beginning of the civilization. The basic needs of food, fuel and fodder are obtained from the land resources with the combination of water and sunlight. The combination of information technology and use of hi-tech equipments paved the way for the introduction of precision horticulture. Precision horticulture may be defined as application of a holistic management strategy that uses information technology to bring data from multiple sources to bear decision associated with agriculture production, marketing, finance and personnel. Enhanced input efficiency is an important component of horticultural production under precision horticulture site specific management. Enhanced input efficiency in crop management can be obtained only when suitable varieties, desired amount of nutrients and water based on calculations, at right time and by proper method are used.

With recent advances in geographic positioning system, remote sensing, data processing, harvesting equipment, fertilizer and pesticide applicators, the approach can be used from a more practical stand point to identify variability and to use the variable rate of inputs over an entire field.

In recent years, there is considerable awareness about the nutritional security and food safety. More emphasis is given to underutilized fruits due to their high nutritive and medicinal value in addition to being resistant/tolerant to many biotic / abiotic stresses. The demand of these fruits are gradually increasing owing to tremendous potential for commercial exploitation aimed at improving the economic status of the poor and marginal farmers. An area, which needs immediate attention, is the collection, documentation, conservation and utilization for their sustained production and popularization.

13.1 INTRODUCTION

The hot arid regions are spread over about 31.7 million ha area mainly in the States of Rajasthan, Gujarat, Andhra Pradesh, Punjab and Haryana, which inhabit on an average 61 persons per square km making up a home for population of nearly 20 million people. The Indian arid zone is characterized by high temperature and low and variable precipitation which limit the scope for high horticultural productivity. However, these conditions greatly favour development of high quality production of fruits such as date palm, ber, pomegranate, citrus, aonla, bael, grapes, guava and vegetables such as cucurbitaceous crops, spices and some medicinal plants. The optimized technologies and inputs could increase the existing low productivity. It is now realized that there is a limited scope for quantum jump in fruit and vegetable production in the traditional production areas. The amelioration of the extreme conditions is also considered vital for life support to the inhabitants of this area. The recent awareness regarding the potential of these ecologically fragile lands for production of quality horticultural produce has not only opened up scope for providing economic sustenance for the people of this region, but also for bringing new areas to increase production through horticulture.

The arid horticultural crops have developed and/or modified to perform certain vital physiological functions even under stress. Strong deep root system (ber, bael, aonla, wood apple, jamun, etc.), moisture synchronous flowering and fruit development (ker, lasora, aonla, pilu, etc.) and other xerophytic characters i.e. leaf shedding in summer (ber), scanty foliage (ker), spiny cladode (cactus pear), mucilaginous sap in plant part (ker, gonda, pilu, bael, etc.), sunken stomata and fur/ hairiness and waxy coating on the leaf surface (phalsa, ber, gonda, fig, etc.) thorny nature, and selective or reduced absorption of cation (Na⁺) and anions (Cl^-, SO4^—) for survival under adverse arid conditions are peculiar adaptations. Therefore, cultivation of suitable species of fruit and vegetables in the arid areas will increase the sustenance of the inhabitants and provide the alternate sources of income through development of nurseries, small scale industries and exports.

12.1 INTRODUCTION

Oil Palm (Elaeis guineensis Jacq.) is a heavy feeder and needs a balanced and adequate supply of nutrients for growth and yield. Fertilizer is one of the most costly inputs, which accounts for greater part of production costs in the cultivation of oil palm. Large amount of nutrients are removed by the fruit bunches harvested from the mature palms. It is estimated that 25 tonnes fresh fruit bunches per hectare per year removes 93.5 Kg Nitrogen, 11.0 Kg Phosphorous, 92.7 Kg Potassium, 19.3 Kg Magnesium and 20.3 Kg Calcium.

Economic yields of oil palm are achieved when the supply of nutrients from the soil, palm residues and fertilizers are properly integrated in required quantities. Leaf analysis is an analytical tool for detecting the nutrient requirements in oil palm and other perennial crops, which are slow growing and can provide easily, defined standard leaf material for analysis due to leaf phyllotaxis. Nutrient deficiency symptoms are also an important means for determining the nutritional problems in oil palm, since the crop presents easily identifiable N, K and Mg deficiency symptoms. However, by the time symptoms are evident, nutrient deficiency might have already affected growth and yield.

Also the nutrient supply may be insufficient before the appearance of leaf symptoms. So there is a need for a thorough inspection of the leaf canopy to corroborate the results of leaf analysis and identify the areas with severe nutrient deficiencies. The research on oil palm nutrition was carried out under rainfed conditions at Palode, Kerala and irrigated conditions at Pedavegi, Andhra Pradesh.

In India, a great variety of soils ranging from red sandy loams/sandy clay loams (Alfisols), alluvial silt loams (Inceptisols / Entisols), heavy black soils (Vertisols) and acidic red laterite soils (Oxisols) are put to oil palm cultivation. In Andhra Pradesh, it is grown in red sandy, red loamy, red loam with clay base, deltaic alluvium pH - 6.5 to 9.0. In Karnataka, it is grown in red and brown sandy loams and black clayey soils, with pH - 6.5 to 9.0. Red soils, red loamy soils and clay loam soils are used for growing oil palm in Tamil Nadu. Laterite soils are used for oil palm cultivation in Kerala.

11.1 INTRODUCTION

Citrus as a perennial crop occupies globally a place of prime importance amongst major fruit crops including India. The cultivation of citrus in India is dominated by three major cultivars viz., mandarin, sweet orange, limes and lemons occupying collectively an area of 9.23 lakh ha with a production of 86.08 lakh tonnes and productivity of 9.3 tonnes/ha. Nagpur mandarin in India is grown in 0.97 lakh ha area with total production of 8.81 lakh tonnes and productivity of 9.l tonnes/ha, respectively. The productivity of mandarins within the country is highly variable in space and time, the major constraint is inadequate and unbalanced fertilizer use. The commercial cultivation of Nagpur mandarin is extensively confined along the Satpuda foothills of central India comprising Chindwara region of Madhya Pradesh and Vidarbha region of Maharashtra. The nutrient demand is highly variable in space (due to heterogenous soils) and time (due to varying weather conditions). Therefore, determination of crop nutrient requirement is a subject of great complexity. Experiments have shown that soils initially rich in fertility developed a variety of nutrient constraints following the non-synchronisation in demand and supply of nutrients with the orchard age (Srivastava et al., 1998). For example when exchangeable K is not rapidly replenished, crops start drawing on the non-exchangeable K, resulting in soil mining and depletion in soil K reserve. A nutrient level sufficient for one particular productivity level may not hold sufficient for other higher productivity levels. An extensive survey of 18,000 ha area of Nagpur mandarin orchards of central India showed large scale deficiency of three nutrients viz., N, P and Zn, with most of the sites expressing multiple nutrient deficiencies (Srivastava and Singh 2002; 2005). Reduced longevity of commercial citrus orchards due to varying nutritional constraints is one of the major production related constraints highly responsible for poor orchard efficiency (Srivastava and Singh, 2008a; 2008b).

10.1 INTRODUCTION

Agriculture is a very important sector for the sustained growth of the Indian economy. About 70 per cent of the rural households and 8 per cent of urban households are still dependent on agriculture for their livelihood. Though, industrialization of the Indian economy has adversely affected the share of agriculture in the GDP, the fact can not be ignored that India has undergone a series of successful agricultural revolutions-starting with the ‘green’ revolution in wheat and rice in the 1960’s and 1970’s, the ‘white’ revolution in milk to the ‘yellow’ revolution in oilseeds in 1980’s. As a result, India has achieved self-sufficiency in agriculture. Applications of agricultural inputs at uniform rates across the field without due regard to in-field variations in soil fertility and crop conditions does not yield desirable results in terms of crop yield. The management of in-field variability in soil fertility and crop conditions for improving the crop production and minimizing the environmental impact is the crux of precision farming. Geographically, India is widely distributed into several agro-climatic zones, and the information needs for the farming systems in these areas are entirely different. Integrating the application of available technologies to realize farmers’ goals requires a systems approach to farming.

9.1 INTRODUCTION

India is the second largest producer of fruit crops with annual production of 68.4 million metric tonnes from an area of 6.1million ha (Anon 2010). The national horticulture mission commenced in 2005 had fixed a target to double the horticultural production by 2011-12. According to the available production data of horticultural crops, it seems that we are very close to achieve our target. But, if the loss caused by biotic and abiotic stresses is accounted, a sound conclusion can be drawn that still there is a huge scope for productivity improvement in fruit crops.

Among biotic factors bacteria, fungi, nematodes, viruses and insect pests, diseases and other pests are widely recognized as the biggest threat to the sustainable production of fruit crops. Every fruit crop is infected with one or other pathogen/pest, which causes a significant reduction in yield. The disease alone both in field and storage accounts for 25-30 per cent losses (Rangaswami and Mahadevan 2002). Along with diseases, insect-pests also cause reduction in the yield. About 600 insect and mite pests have been reported in temperate fruits alone in India (Sharma and Singh 2006).

Beside biotic factors, abiotic factors (salt, drought, low and high temperature) also limit the potential yield of fruit crops. It is estimated that nearly 10 million ha is affected by salinity/alkalinity in India (Singh 2006). Moreover, fruit cultivars are also to be modified for yield and traits of consumers preference e.g. seedlessness in grapes and citrus.

Genetic improvement can be achieved by following the conventional breeding approaches, when the gene of interest is present in related cultivars/species and the crop is sexually crossable. But due to long juvenility and genetically prevalent problems like incompatibility, sterility in most of the fruit crops and apomixis in citrus, mango and apple, conventional techniques seem to have limited role in the improvement of fruit crops.

Various biotechnological approaches either alone or in combination with conventional breeding approaches can provide a direct solution for the genetic improvement of fruit crops.

8.1 INTRODUCTION

In developing countries like India, sustainable development of horticulture is a biggest challenge. There is need to formulate strategies for their management through “state of art” technologies for harnessing the naturally available resources in a sustainable manner to meet the ever growing demands of fruits. Canopy architecture has its role in influencing the productivity of fruits. It has been well highlighted by Halle and Olderman, (1970) and Halle et al. (1978). The emerging concerns in the area of canopy architecture and its management are the existence of large number of old senile orchards among the fruits crops and the development of a rejuvenation technology to restructure their canopy and enhance productive and remunerative plant life. Actually, canopy management “designing the plant as per need, using inherent plant characteristics in accordance with given set of conditions and resources to make the plant to perform maximum. As a result of canopy management, the trees acquire their natural shape which very often is not ideal for quality production. A majority of the trees attain tall, upright and curved growth structure and the canopy is marked with criss-cross branches leading to a highly dense vegetative mass with very poor penetration of active solar radiation. Such conditions not only affect the photosynthetic rate but also facilitate proliferation of pests as they prefer shady conditions. Consequently with pressure of pest abundance and poor photosynthetic efficiency over the years in want of due care of tree canopy architecture, the trees turn senile and unproductive and uneconomical.

Existence of such unproductive senile orchards has a telling impact on the socioeconomic as well as livelihood status of the farmers and consumers are equally affected with low poor production and poor quality of produce is the biggest problem with old orchard. Uprooting such orchards and undertaking new plantation may not be a wise option considering the long gestation period of orchard establishment and resulting impact on livelihood of farm families, environment health as well as the investment cost. Mass scale uprooting of trees for replacement of the orchard will also have very adverse impact on production scenario at the regional and national level.

7.1 INTRODUCTION

Production of temperate-zone fruits in subtropics may seem fanciful to be initiated, but it is a practice that has existed in localized regions for generations. Seedling peaches are grown in Venezuela, Northern Thailand, and Southern Mexico. No one knows precisely when these species were introduced, but local selection has produced cultivars adapted to areas with little or no chilling temperatures. Rest either does not occur or is sufficiently shallow to be broken by stress induced by defoliation or drought. Commercial cultivations of temperate-zone fruits are well-established in subtropical areas, where winter temperatures allow partial breaking of the rest period. In areas of Northern Mexico, Southern Africa, and Israel, for example, chemical treatments are regularly applied to supplement the effects of limited chilling. Because temperature declines with increasing elevations, many microclimates exist in the subtropics where temperate-zone fruits are not currently grown, but could be. Subtropical regions where temperate fruits are grown include the southern past of California (Mediterranean type), the low deserts of the Southwest USA (hot arid type), the Gulf Coast and most of Florida (humid type), the Southern Mediterranean and Northern Sahara, Northern India, Southeast China, the middle part of South America, and much of Australia. Similar potential climatic conditions are also available in subtropics of India.

6.1 INTRODUCTION

Presently, pressure on productive land is greater than ever before and will be further more in years ahead. Per capita arable land is projected to decline from about 0.23 ha in 2000 to about 0.15 ha by 2050 (Lal, 1991). The global demand for food is projected to increase by 1.5 to 2 times due to ever increasing population and also due to demand for richer diets. On the other hand, volatility in the cost of agricultural inputs and the income generated from farm products leads to instability in the farm economy. Moreover, in conventional system, agriculture is practised for uniform application of fertilizer, herbicide, insecticides, fungicides, and irrigation, without considering spatial variability. In some cases, there is excessive use of nitrogenous fertilizer and pesticides, owing to air and water pollution but there are certain cases, where farmers hardly use any chemicals. Hence, to alleviate the ill effects of over and under usage of inputs, the scenario calls for the introduction of modern technologies to improve crop yield, provide information to enable better in-field management decisions, reduce chemical and fertilizer costs through efficient application, permit more accurate farm records, increase profit margin and reduce pollution.

Precision agriculture is a production system that promotes variable management practices within a field, according to site conditions. This system is based on new tools and sources of information provided by modern technologies. These include the global positioning system (GPS), geographic information systems (GIS), yield monitoring devices, soil, plant and pest sensors, remote sensing, and variable-rate technologies for applicators of inputs. Precision farming is concerned with the management of variability in the dimensions of both space and time. Aspects of precision farming, therefore, encompass a broad array of topics, including variability of soil resource base, weather, plant types, crop diversity, machinery performance and most of the physical, chemical and biological inputs used in production of a crop. These are closely linked to the socio-economic aspects of production system. Success in precision framing is directly related to how well it can be applied to manage the space-time continuum in production system. Thus precision farming is technology enabled, information based, and decision focused. It is the integration of these technologies that has enabled farmers and their service providers to do things not previously possible, at level of detail never before obtainable, and, when done correctly, at level of quality never achieved before. In our country, vast data on various aspects like soil characteristics, climatic parameters, topographic features, crop requirement in terms of consumptive use and nutritional requirements have been generated and instruments needed for recording these parameters are also available. However, applications of precision farming as a package in the farmer’s field have received little attention, although some aspects of precision farming have been prasticed. This has been primarily due to lack of awareness about the potential for increasing productivity and improving the quality of produce with minimum use of inputs.

5.1 INTRODUCTION

Drought and rampant poverty, the double plague of arid region, present a scenario of misery and insecurity across the region where agriculture is the main livelihood and chief source for subsistence of the rural people. The conditions of low and erratic rainfall, extreme temperature conditions, high evapo-transpiration, scarce water resources, infertile and saline soils with ill-defined profile development threaten sustainable agriculture. Sustainable productivity is difficult to achieve by monoculture of either seasonal or forage crops. Thus cropping system approach for agricultural production is of far greater significance in these regions. Traditionally efforts have been made by the native people, obviously to achieve sustainable production ensuring ecological stability, to grow several species together, e.g. pearl millet, moth bean, cluster bean and gram between the natural stands of khejri (Prosopis cineraria), bordi (Zizyphus rotundifolia), lasoda (Cordia myxa), pilu (Salvadora oleoides), and ker (Capparis decidua). The perennial species also provide fodder for sheep and goats during scarcity periods.

Fruit based cropping system is now considered to be the most ideal strategy to provide food, nutrition and income security to the people (Chundawat, 1993, Chadha, 2002, Awasthi and Pareek, 2008). Integration of annual crops with fruit trees yields multiple outputs that ensure production and income generation (Randhawa, 1990 and Osman, 2003) in a sustainable manner. Natural resources (land, solar radiation, water, soil etc.) as well as socio-economic inputs (labour, credit, power, and market infrastructure) are efficiently utilized. Crop productivity under tree canopy is enhanced due to improved soil fertility (Young, 1989) and ameliorative influence of shade by reducing understorey temperature and evapotranspiration (Bunderson et al., 1990). Incorporation of fruit trees into the cropping system is more remunerative. It increases the resilience of the system over time. It enables to i) maximize system productivity on annual basis, ii) utilize resources with high efficiency through due consideration of various interactions and direct, residual and cumulative effects occurring in soil-plant-atmosphere continuum, iii) intensify input use vis-à-vis quality of environment, and iv) impart sustainability of farm resources and environment in long term perspective. The type of horticulture based cropping system in arid region has been discussed in this paper considering these issues.

4.1 INTRODUCTION

Ever since the man appeared on the earth, he has been harnessing the natural resources to meet his basic requirements. Reference to soil, water and air as basic resources, their management and means to keep them pure are mentioned in the Vedas, Upanishads and in ancient Hindu literature. Agriculture began sometime during 10000 BC and during 1930 AD use of chemical came into vogue (Sarswat et al., 2003). The phenomenal increase in population of both man and animal in the last century and fast growing industrialization and urbanization in last few decades have overstrained the natural resource base, which are getting degraded much faster than ever before. Thus, the attention of whole world is focused on how to increase production to feed the burgeoning population and the question uppermost in every ones mind is “how can we produce enough food without damage to the natural resource base, in a sustainable manner?” Precision farming is a promise in this regard. It appears to reduce risk of crop failure (De Boer, 1997).

3.1 INTRODUCTION

Today’s technological advancement has reached a level where a farmer can have access to information and tools to manage mechanized field operations. They can now measure, evaluate and deal variability within field (e.g. soil fertility, water availability and yield) that was known to exist previously but was not manageable, to his advantage. The ability to handle the variation in productivity in the field and maximize financial return, reduce waste and minimize impact on environment has always been objective of an enterprising farmer in horticultural sector, especially those who advocate sound horticultural practices. Since precision farming proposes to prescribe strategic farm management decision in the field operations to help to serve this purpose through mechanization, sensing and communication technology, automate data collection, documentation and utilization of this information. Such an approach in horticultural production management gives rise to what is now termed as precision horticulture, soil specific crop management (SSCM), spatially variable crop production (SVCP), smart farming (SF) etc.

2.1 INTRODUCTION

With increasing population, urbanization and continuous depletion of natural resources, there has to be a paradigm shift in farmer’s perception from production to productivity and to profitability. In the present scenario, the major challenges arising are shrinking land and depleting water and other related resources in agriculture. There is need for promoting farmer friendly location specific production system management technologies in a concerted manner to achieve a vertical growth in horticulture production duly ensuring quality of produce and better remuneration per unit of area with judicious use of natural resources. In this endeavour, precision farming aims to have efficient utilization of resources per unit of time and area for achieving targeted production of horticultural produce. With the revolution in information technology, now it has become possible to focus on the positioning of agricultural tools with high degree of accuracy and sophistication for maximizing returns. The combination of information technology and use of hi-tech equipments made it possible for the introduction of precision farming. It is a comprehensive system designed to optimize agriculture production through the application of crop information, advanced technology and management practices. With recent advances in geographic information systems, it has become possible to focus on site specific crop production technologies so as to harness the potential of horticulture through innovative technologies in a sustainable manner.

1.1 INTRODUCTION

The share of agriculture in GDP is sharp declining. Its share which was 55.1 per cent in 1950-51 came down to 21.6 per cent in 2003-04 and it further reduced down standing barely at 14.6 per cent in 2009-10. Horticulture acconts for 29 per cent share in gross GDP obtained from agriculture sector from about 13.08 per cent area put forth under horticultural plantations (Anon., 2010). To achieve the targetted growth rate of 4 per cent in agriculture, horticulture has to grow at the accelerated growth rate above 7 per cent. As a result of R&D initiatives made, there has been considerable increase in horticultural produce which is acclaimed as golden revoution. Horticulture sector has emerged as the frontier area in dealing with the situation of livelihood security and the employment generation. However, looking to the pressure arising from rising population and erratic climatic variation, more attention is required towards the development of technology driven horticulture. Precision farming is being viewed as a promise in this regard.

Precision farming is the process by which exact or accurate results of farming can be obtained. It is a management strategy that relies upon detailed, site specific information to precisely manage production inputs.

Maximisation of quality yield by managing site variable specific management practices is the basic of precision farming. More emphasis needs to be given to make the farming sustainable. In order to make precision farming a reality the following area needs due consideration.

Postharvest losses of fruits and vegetables are even higher and are estimated to be 40-50%. Postharvest fruit rotting are a major cause of those losses and are chiefly caused by fungal pathogens after fruit ripening. In a manner similar to foliar diseases that occur in the field, several factors as fungal pathogenicity, host response and environment determine the outcome of host resistance or susceptibility. However, in postharvest diseases fruit ripening is another major component that will determine fruit resistance. The molecular trigger induces the germ tube to differentiate an appressorium. It has been shown that excess nutrients over ride it and protein synthesis is not required once germination has occurred. Protein synthesis during conidium germination and appressorium formation on cellulose membranes were observed (Pathak, 1997). A specific polypeptide (95 kDa) was synthesized only when appressoria matured (a period lasting from 12-24 h after germination). This molecule is involved in the synthesis of the melanin precursor, Scytalone.

Appressoria grown in the presence of cyclohexamide do not mature nor they subsequently differentiate a penetration peg. Appressorium maturation involves the formation of melanin. It has been shown that melanization of appressoria is necessary for formation of a successful penetration peg. The melanin appears to give the appressorium mechanical strength, but pigmentation is only one factor required for penetration competent appressoria. At restrictive temperatures, pigmentation of conidia of C. lagenarium mutants could be restored with dihydroxyphenylalanine without restoration of appressorial competence. Non-pathogenic mutants have been used to determine factors important for pathogenicity. Cutinase production was essential for penetration of papaya fruits. The cutinase produced during infection of papaya fruit by C. gloeosporioides has been purified and characterized as a glycoprotein of 24 kDa. Polyclonal antibodies raised against this enzyme do not cross react with cutinase from Fusarium so/ani, and lesions do not develop when papaya fruits are inoculated with spore suspensions containing the antibody preparation.

Postharvest food loss has been considered an unavoidable affliction since food storage first began. These losses are much more painful and costlier in terms of money and man-hours. Such losses due to plant parasitic nematodes, in particular, is severe in tropical regions especially in developing countries like India, where proper storage, transmit and marketing facilities are inadequate. In tropical agriculture, increase in production rate is generally low and, by itself, unable to keep pace with the requirements of the increasing population. Hence, such food shortage demands the need to reduce postharvest loss due to nematodes. Postharvest food losses also constitute a vast complex of physical and biological changes, which makes it very difficult to represent in a single figure. As suggested by different sources, an overall loss of at least 10 per cent occurs in the developing countries. However, the magnitude may range from negligible to cent percent in particular nematode species and crop.

In addition to causing direct losses individually, phytonematodes also favour the establishment of secondary, passive micro- organisms like fungi, bacteria, viruses etc. Nematodes cause mechanical wounds, which serve as avenue for the entry of secondary microorganisms (Ravichandra, 2008). This complex association results in severe damage to planting material.

Postharvest diseases due to nematodes can be managed through restricting the movement of infected planting material to uninfected areas; use of uninfected, healthy planting materials; use of treated planting materials; improvements in the cultural practices at the growing site; timely and careful harvesting; use of nematicides both at pre- and postharvest stages; employment of some physical means like heat, radiation etc; improved storage techniques and integration of these methods. By maintaining hygienic conditions during harvest, transportation, storage and packing most of the postharvest damage due to nematodes can be minimized. Of all the methods, however, regulatory measures like quarantine is more practical and effective in restricting the movement of nematode infected plant materials and contaminated soil into a state or country. Contaminated plant material should be treated (hot water or nematicides) to kill the plant parasitic nematodes before planting to prevent the further postharvest damage. These various measures are primarily aimed at either reduction or wiping out of stages of nematode from the site or protection of host from infection or creation of unfavorable host and/or environmental conditions for the nematodes.

A wide variety of fungal and bacterial pathogens cause postharvest disease in fruits and vegetables. Some of these infect produce before harvest and then remain quiescent until conditions are more favourable for disease development after harvest. Other pathogens infect produce during and after harvest through surface injuries. In the development of strategies for postharvest disease control, it is imperative to take a step back and consider the production and postharvest handling systems in their entirety. Traditionally fungicides have played a central role in postharvest disease control. However, trends towards reduced chemical usage in horticulture are forcing the development of new strategies. Controlling or reducing disease relies on integrated crop and postharvest management, with attention to fungicide application, crop hygiene and nutrition, and the management of ripening, to optimise advantages conferred by the plant’s natural resistance factors that prevent and delay disease development. Agricultural production and food distribution systems have evolved over many years to a complex system which allows for nearly year-round supply of most fresh commodities through longterm storage and long distance shipments to consumers. The expectation of year round supplies has resulted in increased challenges for postharvest handling systems. The availability of fungicides for disease management likely played a major role in the evolution of our current system of food distribution (Mitcham, 1999). With the recent loss of registration of many postharvestfungicides and more expected under the Food Quality Protection Act (FQPA), as well as consumer pressure to reduce the amount of chemicals used on food, the challenge to maintain our current system of food distribution increases.

The potential for significant economic losses from decay caused by postharvest pathogens is greater than is often realized. Harvesting and handling, and the attendant costs for labor and postharvest chemical treatments, can increase the cost of fresh fruits and vegetables several fold from the field to the consumer. Therefore, any produce lost in storage is worth more economically than an equivalent amount lost in the field. Considering economics and the problem of world hunger, it is imperative to understand the importance of postharvest disease and to continually strive to reduce postharvest losses from pathogens. In recent years, many international organizations have identified the necessity of reducing postharvest food losses as an important worldwide goal. While postharvest losses vary from season to season, an average loss of 10% to 30% after harvest is an average estimate. Significantly higher losses are not uncommon in developing countries. The extent of these losses justifies increased research efforts in postharvest pathology (Carl E. Sams, 1994). Chemical treatments and irradiation have effectively reduced the number of microorganisms on various commodities. However, consumer fears associated with chemical residues and the effects of ionizing radiation on fresh produce are forcing the development of alternative protection methods. Also, many pathogens have developed resistance to several commonly used chemicals, while other decaycausing microorganisms currently cannot be controlled by chemicals. Therefore it is better to seek control strategies that will supplement or replace current disease control methods.

Mycotoxins are naturally occurring toxins produced by certain molds and can be found in food. The molds grow on a variety of different crops and foodstuffs including cereals, nuts, spices, dried fruits, apples and coffee beans, often under warm and humid conditions. Mycotoxins can cause a variety of adverse health effects and pose a serious health threat to both humans and livestock. The adverse health effects of mycotoxins range from acute poisoning to long-term effects such as immune deficiency and cancer. A scientific expert committee jointly convened by WHO and the Food and Agriculture Organization of the United Nations (FAO), called JECFA, is the international body responsible for evaluating the health risk from natural toxins including mycotoxins. International standards and codes of practice to limit exposure to mycotoxins from certain foods are established by the Codex Alimentarius Commission based on JECFA assessments.

Mycotoxins are toxic compounds that are naturally produced by certain types of molds (fungi). Molds that can produce mycotoxins grow on numerous foodstuffs such as cereals, dried fruits, nuts and spices. Mold growth can occur either before harvest or after harvest, during storage, on/in the food itself often under warm, damp and humid conditions. Most mycotoxins are chemically stable and survive food processing. Several hundred different mycotoxins have been identified, but the most commonly observed mycotoxins that present a concern to human health and livestock include aflatoxins, ochratoxin A, patulin, fumonisins, zearalenone and nivalenol/deoxynivalenol. Mycotoxins appear in the food chain as a result of mold infection of crops both before and after harvest. Exposure to mycotoxins can happen either directly by eating infected food or indirectly from animals that are fed contaminated feed, in particular from milk.

In managing diseases of horticultural crops, pathogen quiescence has important implications in timing prophylaxis, the reduction of stresses that trigger the transition of quiescence to aggression, and managing the harvested crop to prolong quiescence to the point at which yield is no longer affected. The inception of pathogen quiescence and its maintenance on or within the host implies a dynamic equilibrium between the host, the pathogen, and their environment. Physiological and physical changes in the host, its environment, or both trigger changes in that equilibrium to permit the pathogen to resume aggression. Microorganisms lying on the host surface constitute a potential latent infection; as can be the case with Botrytis cinerea conidia that are prevented from germinating by antagonistic bacteria on leaf surfaces (William R. Jarvis, 1994). Quiescence can run the spectrum from the ungerminated spore; through symptomless, internal infections; to visible but nonexpanding lesions, such as ghost spot of tomato (Lycopersicon esculentum) to expanding lesions on banana caused by Colletotrichum musae and on avocado caused by C. gloeosporioides.

A latent, dormant, or quiescent parasitic relationship is a condition in which the pathogen spends long periods during the host’s life in a quiescent stage until, under specific circumstances, it becomes active. Epidemiologists might refer to the period from spore landing until the parasitized tissue produces new spores as a latent period (Dov Prusky, 1996). The term “period of quiescence” is referred to differentiate the quiescent parasitic relationship from the latent period. Quiescence can be enforced during the various processes of fungal attack, which suggests that quiescence may or could occur during any of the processes leading from fungal germination to colonization.

Postharvest handling is the stage of crop production immediately following harvest, including cooling, cleaning, sorting and packing. The instant a crop is removed from the ground, or separated from its parent plant, it begins to deteriorate. Postharvest activities include harvesting, handling, storage, processing, packaging, transportation and marketing. Losses of horticultural produce are a major problem in the postharvest chain. The diseases which develop on harvested parts of the plants like seeds, fruits and also on vegetables are the postharvested diseases. The amount or extent of damage depends mainly on the pathogen(s) involved, on the condition of the products and the condition of storage. Major tips to avoid postharvest losses include Tips to avoid postharvest losses include assessing maturity, to check your water quality, to check water temperature, avoid injury, keep the produce cool and proper storage.

“Storage” means the phase of the postharvest system during which the products are kept in such a way as to guarantee food security other than during periods of agricultural production at the marketing level, to balance the supply and demand of agricultural products, thereby stabilizing market prices. Grain, which includes dry kitchen ingredients such as flour, rice, millet, couscous, cornmeal, and so on, can be stored in rigid sealed containers to prevent moisture contamination or insect or rodent infestation. For kitchen use, glass containers are the most traditional method. Maturity indices are the sign or indication the readiness of the commodity for harvest. It is the basis for determining harvest date. Postharvest losses occur between harvest and the moment of human consumption. They include on-farm losses, such as when grain is threshed, winnowed, and dried, as well as losses along the chain during transportation, storage, and processing.

Postharvest loss of fruits and vegetables is defined as “that weight of wholesome edible product (exclusive of moisture content) that is normally consumed by human and that has been separated from the medium and sites of its immediate growth and production by deliberate human action with the intention of using it for human feeding but which for any reasons fails to be consumed by human.” Not only quantity and quality but even the appearance of fruits and vegetables are affected, and their market value is reduced. Most ‘skin deep’ injuries such as ‘fly speck’ in apples do not affect the edible part. Some infections are not harmful as they occur on inedible parts and can be trimmed off before consumption ego Colletotrichum spots on the outer leaves of cabbage]. Fresh fruits and vegetables are perishable and highly prone to these losses because they are composed of living tissues. These tissues must be kept alive and health throughout the process of marketing. These are composed of thousands of living cells which require care and maintenance (Alao, 2000). The pathological rots are the most serious which is followed by mechanical injury. Pathological rots in combination with mechanical damage cause serious damage to the perishables. Environmental factors such as temperature, relative humidity and oxygen balance most especially during storage are also greatly responsible for damage also environmental conditions such as temperature and humidity are responsible for rendering fruits and vegetables susceptible for pathological attacks (Yahaya and Mardiyya, 2019). Fungi and bacteria are the major pathogens, which cause postharvest diseases in crops leading to about 30 % loss. Normally diseases will be more at improper temperature and relative humidity. Apart from causing disease, pathogens are also involved in ethylene production, which hastens the deterioration of the product.

Fruits, nuts and vegetables play a significant role in human nutrition, especially as sources of vitamins, minerals, dietary fibre, and antioxidants. Increased consumption of a variety of fruits and vegetables on a daily basis is highly recommended because of associated health benefits, which include reduced risk of some forms of cancer, heart disease, stroke, and other chronic diseases. Both quantitative and qualitative losses occur in horticultural commodities between harvest and consumption. Qualitative losses, such as loss in edibility, nutritional quality, caloric value, and consumer acceptability of fresh produce, are much more difficult to assess than are quantitative losses. Quality standards, consumer preferences and purchasing power vary greatly across countries and cultures and these differences influence marketability and the magnitude of postharvest losses. Postharvest losses vary greatly across commodity types, with production areas and the season of production. Losses of fresh fruits and vegetables in developed countries are estimated to range from 2 percent for potatoes to 23 percent for strawberries, with an overall average of 12 percent losses between production and consumption sites. In contrast, the range of produce losses in developing countries varies widely. Losses at the retail, food-service, and consumer levels are estimated at approximately 20 percent in developed countries and about 10 percent in developing countries (Adel A. Kader and Rosa S. Rolle, 2004 ). Overall, about one third of horticultural crops produced are never consumed by humans. Reduction of postharvest losses can increase food availability to the growing world population, decrease the area needed for production, and conserve natural resources. Strategies for loss prevention include use of genotypes that have longer postharvest-life, use of integrated crop management systems and good agricultural practices that result in good keeping quality of the commodity and use of proper postharvest handling practices in order to maintain the quality and safety of fresh produce.

Food waste and loss is an enormous issue worldwide. The FAO states that ‘Hunger is still one of the most urgent development challenges, yet the world is producing more than enough food’, but a vast amount of what is produced gets lost on its way from the field to the consumer. According to the FAO, about 30% of cereals, 20% of dairy products, 35% of fish and seafood, 45% of fruits and vegetables, 20% of meat, 20% of oilseed and pulses and 45% of roots and tubers are lost or wasted. Postharvest food loss is defined as measurable qualitative and quantitative food loss along the supply chain, starting at the time of harvest till its consumption or other end uses. Food losses can either be the result of a direct quantitative loss, for example, during the process of harvest or transport or arise indirectly due to losses in crop quality such as undesired sprouting or water loss. Postharvest food loss consists of many factors, which have not changed much in the last 40 years and so postharvest food loss in general has not changed much. Figure 1 illustrates the main reasons for food loss along the supply chain and is based on ‘The food pipeline’ published by Bourne in 1977. Food loss is highest during storage due to pathogens (insects, bacteria and moulds), environmental conditions (e.g. rain, humidity, heat and frost), sprouting and quality loss (rancidity, water loss and saccharification) or animals (rodents and birds). Recently published data for Switzerland have shown that about 53%-55% of the initial fresh potato production and 41%-46% of the initial processing potato production are lost mostly due to pathogen infection, saccharification, water loss of tubers and early sprouting during storage (Buchholz et al, 2018).

10.1 INTRODUCTION

‘Tissue culture’ is commonly used as a blanket term to describe all types of plant cultures, viz., callus, cell, protoplast, anther, meristem, embryo and organ cultures (George, 1993). It relies on the phenomenon of cell totipotency. The different techniques of culturing plant tissues may offer certain advantages over traditional methods of propagation.

Growing plants in vitro in a controlled environment, with in-depth knowledge of the culture conditions and the nature of the plant material, ensures effective clonal propagation of genetically superior genotypes of economically important plants. Micropropagation has become an important part of the commercial propagation of many plants (George and Sherrington, 1983; and Zimmerman et al., 1986) because of its advantages as a multiplication system (Pierik, 1997 and Razdan, 2003). Several techniques for in vitro plant propagation have been devised, including the induction of axillary and adventitious shoots, the culture of isolated meristems and plant regeneration by organogenesis and/or somatic embryogenesis (Williams and Maheswaran, 1986; and Gautheret, 1985).

Tissue Culture is becoming as an alternative means to vegetative propagation of plants. In vitro growing plants are usually free from bacterial and fungal diseases. Virus eradication and maintenance of plants in virus free stage can also be rapidly achieved in cultures (Sharma, 2016).

9.1 INTRODUCTION

When a new individual arises from a somatic cell without formation of a seed, it is called vegetative propagation. Vegetative propagation occurs naturally (i.e., natural vegetative propagation) in many crops, and profitably exploited in horticulture using either conventional or biotechnological artificial techniques. We shall discuss conventional artificial vegetative propagation in this chapter including cuttings, grafting, budding, layering, suckering, etc. They have been widely used for commercial propagation of fruit trees and ornamental shrubs.

8.1 INTRODUCTION

Natural methods of vegetative propagation include strategies that the plants have developed for self-multiplication or perpetuation. Natural vegetative propagation is mostly a process found in herbaceous and woody perennial plants, and typically involves structural modifications of the stem, although any horizontal, underground part of a plant (whether stem, leaf, or root) can contribute to vegetative reproduction of a plant. In crops like ginger, turmeric, onion, garlic, gladioli, and dahlia etc. they continue to grow from buds that are present on the surface of the stem. In some plants, like sweet potato adventitious roots can give rise to new plants. In Bryophyllum and Kalanchoe, the leaves have small buds on their margins. On detachment from the plant, they are able to grow into independent plants and they may also start growing into free plants if their leaves were made to grow in the soil. In nature, vegetative reproduction occurs through underground stems, sub-aerial stems, bulbils, leaves and even roots.

7.1 INTRODUCTION

Grafting and budding are horticultural techniques used to join parts from two or more plants so that they appear to grow as a single plant. In grafting, the upper part (scion) of one plant grows on the root system (rootstock) of another plant. In the budding process, a bud is taken from one plant and grown on another. The practice of grafting can be traced back 4,000 years to ancient China and Mesopotamia. As early as 2,000 years ago, people recognized the incompatibility problems that may occur when grafting olives and other fruiting trees.

7.2 ROOT STOCK

The part of the graft that provides root system to the grafted plant is known as rootstock. It is, normally, raised by seeds in the seedbed and then, transplanted in the nursery bed for budding and grafting. Rootstocks are also raised in pots and polythene bags.

6.1 INTRODUCTION

The ultimate success of an orchard enterprise largely depends upon the quality and genuineness of planting materials as nursery plants are the foundation of the orchard. Fruit crops, mostly being perennial in nature, call for utmost care in selection of cultivar, quality planting material and adoption of right technology for mass multiplication of planting material. Mistakes committed during the initial establishment of orchards cannot be corrected and will cause serious damage to production and productivity. The variation of scion-wood and rootstock has great bearing on the productivity of an orchard. Thus, it is of immense importance having all plants carefully labelled or otherwise marked. Cuttings taken from the mother plant will grow to have the same genetic qualities as the original plant. This is why the plants resulting from these cuttings are called “clones”. When a stem cutting is taken from a mother plant, the piece of stem will produce new roots if it is properly hydrated. Additionally, some plants can be grown from leaf pieces, or leaf cuttings and these will produce both stems and roots.

Thus, the progeny trees are the basic component for the multiplication of fruit plants and ultimately deciding the quality and productivity of the fruit crops. Hence, it is necessary to stock the true to type and best quality progeny trees.

In asexual methods of plant propagation, plant parts are being used as propagating materials. The plant from which the plant parts are collected is known as mother plant. There is every possibility of transmission of disease or pest which is present in the mother plant to the progeny. The mother plants have to be maintained properly to obtain disease free planting materials so that multiplication of disease/pest can be prevented. Thus, there is a need for the establishment of mother plant block/scion banks.

5.1 APOMIXIS

Apomixis is derived from two Greek words “Apo” (away from) and “mixis” (the act of mixing or mingling). It refers to the occurrence of an asexual reproductive process in the place of normal sexual processes involving reduction division and fertilization. During sexual reproduction, developmental steps occurring inside the ovule produce the female gametophyte (embryo sac) and following a double fertilization event give rise to embryo and endosperm structures. Apomixis can be best described as the reference to the asexual process. In some species, embryo sac is produced not as a result of meiosis and fertilization but by certain asexual processes. The occurrence of such asexual reproductive process in the place of normal seed reproductive processes of reduction division and fertilization is known as Apomixis. Such seedling plants produced in this manner is known as apomicts. ’’Apomixis’’ is used synonymously with ’’agamospermy’’ (Stebbins 1950), referring to the asexual production of seed.

Apomixis (asexual seed formation) is a phenomenon in which a plant bypasses the most fundamental aspects of sexual reproduction—meiosis and fertilization—to form a viable seed. Plants can form seeds without fertilization, and the seed genotype is consistent with the female parent. The development of apomictic technology would be revolutionary for agriculture and for food production as it would reduce costs and breeding times and also avoid many complications typical of sexual reproduction (e.g., incompatibility barriers) and of vegetative propagation (e.g., viral transfer). The application of apomictic reproductive technology has the potential to revolutionize crop breeding. Apomixis is widely distributed among higher plants. More than 300 species belonging to 35 families are apomictic. It is most common in Gramineae, Compositae, Rosaceae and Rutaceae. Among the major cereals maize, wheat and pearl millet have apomictic relatives. Apomixis is reproduction where only one parent passes genes to the offspring (King, 2006). Apomictically produced offspring are genetically identical to the parent (clones).The method is mostly seen in plants, especially flowering plants. Apomixis was defined by Hans Winkler (2008) as the replacement of the normal sexual reproduction by asexual reproduction, without fertilization. Propagation from cuttings or leaves, is not apomixis. Natural replacement of the seed by an asexual method is apomixis.

4.1 INTRODUCTION

The method of propagation in plants may be sexual or asexual. In sexual method of propagation, specialized reproductive cells called gametes are formed by the process of gametogenesis. Fusion of the male and female gametes leads to the development of an embryo and eventually the seed.

4.2 GAMETOGENESIS

The production of male and female gametes is known as gametogenesis. It occurs within microspores and megaspores. It involves only mitosis. It is of two types: (1) microgametogenesis and (2) megagametogenesis.

3.1 INTRODUCTION

A nursery is a place, where seedlings, saplings, trees, shrubs and other plant materials are grown under intensive care and maintained until they are ready for final transplanting in the main field. The importance of the best quality planting material as an initial investment is a well-realized factor for persons engaged in horticulture field. So, nurseries have great demand for the production of plants, bulbs, rhizomes, suckers and grafts. But in general, good quality and assured planting material at reasonable price is not available in most of the cases. Nursery is the basic need of horticulture. Plant propagation techniques and practices is the core of horticulture nurseries. The planting materials for horticultural plantations are raised from seeds and vegetative parts. The difficulty of procuring seeds and their rising cost makes it necessary to find means to increase seedling survival and growth.

2.1 INTRODUCTION

Several propagation structures are helpful in propagation of horticultural crops. These structures are helpful for seed germination, rooting of cuttings, layering, grafting etc. and other hardening operations. The structures which facilitate propagation of plants are called propagation structures. Propagation structures are required for propagating plants by seed, cuttings and grafting.2.2

GREENHOUSE

Greenhouse is a structure covered with glass or polythene for protection against adverse climatic conditions as well as to provide optimum environment for growth of the plants. Greenhouse has been used long back by horticulturists as a means of forcing rapid growth of plants and extending the growing season particularly in colder areas. Plants are grown or cuttings are rooted in a greenhouse when the atmospheric condition does not permit for raising them in outdoor conditions. Modern greenhouses are equipped with regulatory mechanisms for controlling temperature, light intensity, air, humidity etc. Plants in green house are grown in the ground bed or bench type raised beds. The size of the greenhouses and dimensions of beds vary according to the need of propagators. Glass covered greenhouses are expensive but they have long life. However, for short-term benefits, plastic covered greenhouses can also be made. Plastic covered greenhouses are lighter than glass covered ones but there is increase in humidity is such houses, especially in winters, which results in undesirable water drops on the plants. It can however be overcome by making adequate ventilation. Polyvinyl chloride (PVC) has also been used in construction of greenhouses but it tends to darken pre-maturely in sunlight. In India, construction of temporarily low-cost poly houses is in fashion for raising nursery of fruit plant in off-season. Such low-cost greenhouses are constructed either on wood or metal framework and are covered with polyethylene sheet of 0.10 to 0.15mm thickness, which is resistant to ultra-violet rays. These houses are equipped with thermostat, cooler or an air conditioner or humidifier etc for rigid control on temperature and humidity. Greenhouses made from fibre glass sheet are more durable than the polythene houses, but are quite expensive. In greenhouses, two types of beds are used for raising seedlings. In greenhouses, the beds may either be prepared on ground itself or raised beds or bench type beds are used. Greenhouse structures vary from elementary home constructed to elaborate commercial installations.

1.1 WHAT IS PLANT PROPAGATION?

Propagation of plant is defined as multiplication and perpetuation of new individuals from a selected plant having all the characters of the original one. It is the process of increasing the number of plants of a particular species or cultivar. It refers to the multiplication of an individual plant or group of plants, which have specific value to mankind. New plants or new individuals are required for establishing new plantings/new gardens/new orchards.

Potato plays a vital role in food security for ever increasing world population (Thiele et al., 2010; Scott and Sourez, 2011; Scott and Sourez, 2012). It is highly capital and labour intensive crop (Kushwah and Singh, 2011). Presently, India is the second largest potato producer in the world. India is producing about 45-48 million tonnes of potato annually from about 2 million hectare of area. However, India would require 125 million metric tonnes of potato from 3.6 million hectare area in 2050 (Vision, 2050). The stagnating growth rates of cereals’ productivity, large scale diversion of food grains to feed & bio-fuel and expected steep rise in per capita consumption of pulses, edible oil, fruits, vegetables, milk, sugar and non-vegetarian food in the regime of steadily rising population is bound to put pressure on existing cultivable land. Since, cultivable land is expected to remain more or less constant in the next 40 years, the role of crops like potato having higher production potential per unit land and time will become imperative. In this context potato crop has very high probability of making crucial contribution to the future national food security agenda. The perceived changes in Indian socio-economics in the medium and long term are expected to enhance per capita food consumption of fresh potatoes.

Fertilizer and nutrient recommendations for different crops are mostly region specific and very general in nature which results into a blanket application of fertilizer leading to its poor efficacy and wastage of costly resources as well as of environmental pollution. In addition, this has caused severe imbalance of nutrients in soil. The spatial variability of available nutrients properly mapped along with other relevant parameters will help to develop site specific nutrient management practices with increased productivity and profitability apart from checking nutrient imbalance and environmental pollution.