eChapters

1 Sechium eduleis the botanical name of

 a) Chekurmanis b) Basella

 c) Chow-Chow d) Water Leaf

 2 Cylon Spinach is also known as

 a) Chayote b) Malabar Spinach

 c) Indian Spinach d) Water Leaf

 3 Botanical name of Leek is

 a) Allium porum b) Allium sativum

 c) Allium cepa d) None of thes

1. INTRODUCTION

Exotic means anything of foreign origin and something not of native growth. Exotic vegetables are those species introduced to a country or location. Broccoli, Brussels sprout, Knol- Khol, Red Cabbage, Lettuce, Asparagus, Baby Sweet Corn, Chive, Garden beet, Kale, Swiss chard, Parsley, Parsnip, Chinese cabbage and Leek are important exotic vegetables. These generally require cool temperature.

Due to increasing foreign culture and increasing living standards, the demand of exotic vegetables is continuously increasing in cosmopolitan cities and five star hotels. These are good in taste and have high nutritive value. Most of the exotic vegetables can be used in salad and soups. These crops are very remunerative.

In urban areas only few part time grower devote time to the production of exotic vegetable. Exotic vegetable farming is profitable venture that require little capital and become source of livelihood to the farmer. The increase in their output level and profit will contributing to food security in the country. About 50% world population living in the cities. The rapid urbanization poses new challenges for food security. It is hard for most of the cities in the developing countries to provide sufficient employment for rapid increasing population. Some district of Maharashtra like Pune, Nasik & Satara now growing exotic vegetables like asparagus and broccoli. Cherry tomato, leek, lettuce, red cabbage & baby corn are also important as exotic vegetables.

In HP cultivation of Exotic Vegetable like asparagus, broccoli, lettuce, leek, chinese cabbage, snow pea, and parsley start picking up in Theog, Matyana, Saproon Valley, Sirmour, Katrain, Manali, Narkanda & Sanj Valley. These vegetables are beneficial for health as they are rich in phyto-chemicals and neutraceuticals. India is endowed with a wide range of tropical, sub-tropical and temperate agroclimatic conditions, therefore almost all kinds of vegetable crops grown around the world can be cultivated in one or the other corner. There is a lot of potential for exotic vegetables for domestic and export market. Important one are:

Exotic vegetables are those vegetables that are introduced or not common in India. Its area under cultivation is comparatively less and most of the growing area surrounds the targeted markets especially five star hotels and restaurants. Now a days, there is an increasing trend in cultivation of these high value vegetables because of increased demand and good profit. Farmers could sell these vegetables at a at a higher price when compared to traditional vegetables. They are mostly cultivated in net houses or poly houses. Some of the exotic vegetables popular in India are asparagus, celery, broccoli, lettuce, parsley etc.

Asparagus (Asparagus officinalis)

Asparagus is a dioecious monocot which produces tender succulent above ground stems known as spears from fleshy underground crown. These tender spears are used as vegetable, for cooking purpose and for the preparation of soups. The white crystalline substance, asparagine present in the juice of young shoots have diuretic properties and is used in cardiac dropsy and chronic gut. Asparagus is mainly cultivating in countries like USA, Germany, Spain, France etc. while in India, it is cultivating only in a negligible area. Asparagus is grouped under cool season vegetables. But newly emerging spears are susceptible to frost though a wide range of environmental conditions can be tolerated by mature asparagus. Asparagus is native to temperate Europe and Asia and has been cultivating for 200 years.

Morphology

Asparagus is perennial in nature and produce erect branched stem and grows upto a height of 1 to 3 m. The crop yield continuously for 10-15 years from the initial year of spear production. Asparagus roots are tuberous and the leaves are narrow and needle like. Male and female flowers are produced in different plants.

10.1 INTRODUCTION

Agriculture is a very important sector for the sustained growth of the Indian economy. About 70 per cent of the rural households and 8 per cent of urban households are still dependent on agriculture for their livelihood. Though, industrialization of the Indian economy has adversely affected the share of agriculture in the GDP, the fact can not be ignored that India has undergone a series of successful agricultural revolutions-starting with the ‘green’ revolution in wheat and rice in the 1960’s and 1970’s, the ‘white’ revolution in milk to the ‘yellow’ revolution in oilseeds in 1980’s. As a result, India has achieved self-sufficiency in agriculture. Applications of agricultural inputs at uniform rates across the field without due regard to in-field variations in soil fertility and crop conditions does not yield desirable results in terms of crop yield. The management of in-field variability in soil fertility and crop conditions for improving the crop production and minimizing the environmental impact is the crux of precision farming. Geographically, India is widely distributed into several agro-climatic zones, and the information needs for the farming systems in these areas are entirely different. Integrating the application of available technologies to realize farmers’ goals requires a systems approach to farming.

15.1 INTRODUCTION

Vegetables are rich sources of many essential micronutrients, including vitamin C, vitamin K, folate, thiamine, carotenes, minerals, and dietary fibre. In addition, vegetables are rich in health related phytochemicals, such as antioxidants. Such phytochemicals play an important role in reducing the risk of many chronic diseases. Therefore, it is essential to produce more vegetables to feed our ever growing population. In this context, use of genetically improved, disease resistant and high yielding varieties in precision farming may play a significant role in increasing vegetable productivity and production.

15.2 EXPLOITATION OF GENETIC RESOURCES

The genetic resources of a crop may be defined as the sum total of hereditary material, i.e., all the alleles of various genes present in a crop species and its wild relatives. Genetic resources are broadly grouped into two major types (i) cultivated germplasm, and (ii) wild germplasm. Alternatively, they may be termed as (i) indigenous (from the country in question), or (ii) exotic (from another country) based on their place of origin. Genetic resources consist the following five types of materials: (1) land races, (2) obsolete varieties, (3) modern varieties or varieties in cultivation, (4) breeding lines, and (5) wild forms and wild relatives.

Introduction

Okra, Abelmoschus esculentus (L.) Moench, is annual herb grown in tropical and subtropical parts of world for green tender immature fruits and consumed as cooked mostly fresh but sometimes sun dried or frozen also used as vegetable. Some parts of plant and roots are used for medicinal as well as purification of sugarcane juice. Green fruit contains vitamins, calcium whereas seeds possess 13-22 per cent edible oil and 20-24 per cent edible protein. India is leading producer of okra and exporting fresh as well as processed fruits to other countries and also ranked first in area (0.48 million ha.), production (3.5m tones) and productivity (9.8 t/ha) during 2005 against the world area (0.78 million ha.), production (4.99 m tones) and productivity (6.4t/ha).

ABSTRACT

Tinospora cordifolia, a versatile medicinal species with antipyretic and immunomodulatory properties is one of the indigenous sources of the therapeutically valuable alkaloid, berberine. However, the plant contains only meagre amounts of this alkaloid. Hence upgradation of the content of berberine in Tinospora, through biotechnological interventions assumes importance. Four week old leaf, petiole and stem derived calli of two ecotypes of Tinospora viz., Vellanikkara ecotype and Madurai ecotype, subcultured on to Murashige and Skoog (MS) medium, supplemented with various growth regulators, were incubated in light and screened for the presence of berberine employing thin layer chromatography. MS medium with NAA @ 2 mg l^-1 supplemented with BA or kinetin, each at 2 mg l^-1, was identified as the basal production medium for in vitro production of berberine, yielding 7.55 μg and 7.36 μg berberine respectively, per gram of calli. Calli produced from stem segments registered maximum amount of berberine compared to leaf and petiole derived callus cultures. Increasing levels of sucrose in basal medium did not have a favourable influence on the expression of berberine in the test calli. Reducing nitrate and phosphate content of the basal medium to half their strength resulted in enhanced berberine production in in vitro cultures of both the experimental ecotypes. Favourable influence of precursor feeding on upgrading the content of berberine in leaf and stem derived calli of both the ecotypes of the experimental species was also confirmed in the study.

Introduction

Chilli is one of the most important spice and condiment of daily use in all most all the Indian houses. The fresh and dry fruits are the rich source of Vitamin A (292 IU) and Vitamin C (111 mg/100g). Its pungency not only improves the taste of the different preparations but also improve their storability. The colour of the fruits is due to the presence of the pigment capsanthin and pungency and acridity is due to the presence of alkaloid oleoresins knows as capsaicin (C₁₈ H₂₇ O₃ N). The capsaicin has a very good medicinal importance and also having importance for the pharmaceuticals industries for preparation of the different types of the drugs, because of the presence of the antioxidants like Vitamin A, C and P (Rutin). The green and red sweet pepper, bell pepper, Pimiento (heart shape) and cherry pepper are used in the fresh market processing industries for stuffing pickling and dehydrated processed meat. It is used as green as well as dry powder, pickles, salad and for industry to prepare the medicines for external and internal uses.

ABSTRACT

The Plant Growth Promoting Rhizobacteria (PGPR) is a group of rhizosphere-colonizing bacteria producing substances which increase the growth of plants and/or protect plants against pathogens. The use of PGPR has become rather common practice and is on the rise in many regions of the world. Inoculation with PGPR also aims at reducing the application of potent ially pollut ing chemical fertilisers and pesticides. Biocont rol microorganisms have unquestionable potential for managing plant diseases, insect pests and nematodes besides increasing crop productivity. Interest in biological control has recently been intensified because of imminent bans on effective pesticides, widespread development of pesticide resistance in insect pests and plant pathogens and a general need for more sustainable pest control strategies. Active and long-term colonization of the root surface of the plant and effective expression of disease-suppressive traits are generally considered prerequisites for successful suppression of horticultural crop diseases by rhizobacteria. The important mechanism of biocontrol by PGPR involve competition and production of antibiotics such as 2,4-diacetylphloroglucinol (DAPG), pyoluteorin (PLT), pyrrolnitrin, phenazine-1-carboxylic acid (PCA), 2^-hydroxy phenazines and phenazine-1-carboxamide (PCN). Siderophores, including pyochelin and pyoverdine which chelate iron and other metals also contribute to disease suppression by conferring a competitive advantage to biocontrol agents for the limited supply of essential trace minerals in natural habitats. Induced systemic resistance (ISR) is a state of increased defensive capacity developed by the plant when appropriately stimulated, through activation of latent resistance mechanisms induced by diverse agents including rhizobacteria. Microplants are first grown in vitro under aseptic conditions devoid of microorganisms. They are then transferred to a post vitrum substrate for acclimatization. By creating a beneficial rhizosphere in microplants at an early stage, the plants could be better protected against biotic and abiotic stress that occurs in the greenhouse or in the field. The beneficial rhizosphere can be created by biotization of microplants with PGPR. The search for PGPR to control postharvest decay of fruit crops has been actively pursued and promising strategies have been practiced nowadays. Biological control of postharvest diseases of perishable horticultural crops with PGPR is complex and involves a number of mechanisms to suppress the development of the disease. PGPR, being a potential candidate in disease management through multiple mode of action, it becomes highly imperative to know its different role in the management of plant pathogens.

ABSTRACT

In Kerala, the commercial cultivation of tomato is limited due to the bacterial wilt disease caused by the soil borne pathogen Ralstonia solanacearum. The release of bacterial wilt resistant varieties like Sakthi, Mukthi and Anagha has increased the area under tomato. But, these varieties are susceptible to tomato leaf curl virus diseases caused by Germini group virus and transmitted by white fly (Bemisia tabaci). The disease incidence varies from 10.77% to 90.5% and the yield loss is tremendous. Unless the tomato variety resistant to ToLCV disease is resistant to bacterial wilt also, it cannot be recommended for cultivation in the State.

The somaclonal variations have been well exploited in developing disease resistant varieties in many crops. Therefore an experiment was formulated to study the somaclonal variations and to screen the somaclones for resistance to tomato leaf curl virus disease in L. esculentum var. Sakthi and L. pimpinellifolium.

The somaclones of Sakthi and L. pimpinellifolium along with the parental lines were planted in earthen pots containing potting mixture with bacterial wilt sick soil. These were screened for resistance to ToLCV disease by artificial inoculation of the vector Bemisia tabaci inside the cages. The observations were recorded on ex vitro survival, biometric characters and reaction to ToLCV and other major diseases.

The ex vitro survival was 46.2% in Sakthi and 36.6% in L. pimpinellifolium. The somaclones of Sakthi showed wide variation for plant height and spread compared to that of L. pimpinellifolium. Some of the somaclones exhibited ‘gigantism’ with potato leaved plants. The yield of the somaclones of Sakthi were higher than that of parental line.

14.1 INTRODUCTION

The efforts for harnessing the natural resources for sustainining the human race have been ‘on’ since the beginning of the civilization. The basic needs of food, fuel and fodder are obtained from the land resources with the combination of water and sunlight. The combination of information technology and use of hi-tech equipments paved the way for the introduction of precision horticulture. Precision horticulture may be defined as application of a holistic management strategy that uses information technology to bring data from multiple sources to bear decision associated with agriculture production, marketing, finance and personnel. Enhanced input efficiency is an important component of horticultural production under precision horticulture site specific management. Enhanced input efficiency in crop management can be obtained only when suitable varieties, desired amount of nutrients and water based on calculations, at right time and by proper method are used.

With recent advances in geographic positioning system, remote sensing, data processing, harvesting equipment, fertilizer and pesticide applicators, the approach can be used from a more practical stand point to identify variability and to use the variable rate of inputs over an entire field.

In recent years, there is considerable awareness about the nutritional security and food safety. More emphasis is given to underutilized fruits due to their high nutritive and medicinal value in addition to being resistant/tolerant to many biotic / abiotic stresses. The demand of these fruits are gradually increasing owing to tremendous potential for commercial exploitation aimed at improving the economic status of the poor and marginal farmers. An area, which needs immediate attention, is the collection, documentation, conservation and utilization for their sustained production and popularization.

Agriculture is a generic term used to include various types of farming systems, single to multiple crops under various agro-climatic conditions thereby covering crop husbandry, animal husbandry, vegetable growing, floriculture, horticulture, fishery, poultry, goat rearing, piggery, rabbit rearing, sericulture, forestry, vermi-composting, etc. Indian agriculture is a symbiosis of various production systems, a way of life or a tradition, which for the centuries have shaped the thoughts, the outlook, the culture, and the social and economic force of rural life. It is well known for its multi-functionalities of providing employment, cultural heritage, livelihood, social security, family bondage, nutritional and food security. Although agriculture is the main stay of the Indian economy and supports nearly two-third of the work force, yet this is not a highly rewarding enterprise for a large majority of farmers who hold small and marginal size holding. At the same time, the size of the land holding is on a gradual decline, while contribution of farmwomen is on an increase as men go elsewhere in search of better jobs. This sector holds and will continue to be central to all strategies of socio-economic development of the country. A farmer is a multi-purpose entrepreneur (Rajavanshi, 2007).

EXPERIMENT

TECHNOLOGY FOR EXTRACTION OF KERNEL OIL FROM STONE FRUITS

Apricot, peach, plum, cherries, nectarines etc are the important stone fruits belonging to the family Rosaceae. These fruits are known to contain stones/pits i.e., apricot (6.0-11.5%), peach (7.5-11.5%), plum (4.5-7.0%) and these stones are reported to contain kernels (%) apricot (28.0-32.0%), peach (5.7-5.9%), plum (10.0-20.8%), almond (28.0-30.0%). These kernels can yield an oil yield of (42.5-45.5%), (38.5-41.5%), (39.2-40.6%) and (52.0-58.9%), respectively. Thus, these stone fruit kernels can be utilized for extraction of kernel oil by using the improved technology developed for extraction of oil. The developed technology consists of mechanical decortication of stones by the use of mechanical decorticator, kernel separation by using specific gravity separation technique, oil extraction by using table oil expeller and oil filtration through oil filter press followed by packing in PET bottles and PE pouches.

Mechanical decorticator: The mechanical decorticator is a type of roller crusher consisting of two rollers moving in inward opposite directions with the help of 3 HP motor and is provided with a hopper and feeder assembly. The clearance between two rollers is adjusted according to the respective size of stones.

Table oil expeller: Oil expeller is a 24 patti screw type oil expeller driven by 7HP motor, in which the kernels are fed into the moving hopper at pre-determined flow rate, which are pressed in between rollers (worm) and side walls of the expeller. The kernels are then, passed through the expeller 3-4 times until a thin slice of press cake is obtained.

ABSTRACT

Zingiber officinale is a herbaceous perennial. The absence of seed set in ginger makes conventional breeding methods inapplicable. Genetic modification through biotechnological means is the only way for introducing novel genes into the cultivated types. Transient expression of the gus reporter gene was used in preliminary experiments. Agrobacteruim tumefaciens strains EHA105/p35SGUS Int. effective in expressing b- glucuronidase activity was used for standardizing the optimum conditions for effecting transformation, such as preculture of explants, bacterial dilution, infection time, co-cultivation period etc. In addition, effects of acetosyringone and explant wounding were evaluated using the same strain. Genetic transformation of bud and regenerated plantlets was confirmed by their ability to grow on MS medium containing kanamycin 100 mg l-1 + cefotaxime 300 mg l-1 by histochemical b-glucuronidase assays.

Factors for deterring the Fertilizer Schedule are two factor

Soil Supplying Power: Growing different crops during different seasons alters the soil nutrient status, estimated by soil analysis at the beginning of the season. The soil supplying power increases with legume in rotation, fertilizer application and addition of crop residues. The available nitrogen and potassium in soil after groundnut are higher to initial status of the soil. But after pearl millet, only potassium status in the soil is improved and no changes in P.

Nutrient Uptake by Crops: The total amount of nutrients taken by the crops in one sequence gives an indication of the fertilizer requirement of the system. The balance is obtained by subtracting the fertilizer applied to crops that nutrient taken by the crops.

Residual Effect of Fertilizers: The extent of residues left over in the soil depends on the type of fertilizer used. Phosphatic fertilizer and FYM have considerable residue in the soil, which is useful for subsequent crops. The residues left by potassium fertilizers are marginal. Legumes add nitrogen to the soil in the range of 15 to 20 kg/ha. The amount of nitrogen added depends on the purpose. Green gram grown for grain, contributes 24 and 30 kg N respectively to the succeeding crop. Inclusion of leguminous green manures in the system add 40 kg to 120 kg N/ha. The availability of phosphorous is also increased by incorporation of green manure crops.

Benefit of biofertilizers have been extensively studied for various agricultural and horticultural crops. However, the effectiveness of inoculated biofertilizers are influenced by several factors. If the use of biofertilizers have to be popularized in horticultural crops, the major factors affecting their performance particularly in relation to soil, plant, quality of the product and application methods have to be addressed. Factors affecting the performance of biofertilizers are:

4.1 Quality of the product

4.1.1 Production process

The high quality of biofertilizers are determined by the production process (Bashan et al., 2014). At the same time, the population density of mother culture and the quality of the final products are directly related (Stephens and Raskm, 2000). As the inoculum consists of a strain, the relationship among the microorganisms interaction in the rhizosphere have to be understood. In the case of more than one microorganisms, the efficiency depends on the various mode of action by various microorganisms which might overlap with antagonistic acitivities (Vassilev et al., 2001, 2006 b). The relationship of microorganisms with plants is not based on the taxonomic diversity, but their functional diversity (Maherali and Klironomos, 2007).

The efficiency of biofertilizers could be assured by enhanced shelf life of the inoculant and biological traits which are a challenge for developing a formulation (Bashan, et al., 2014). Hence, either single or consortia of microorganisms formulation with or without additives determines the efficacy of the biofertilizers. The formulation determines shelf-life during storage and transport, which enhances the persistence of the strain in soil and get maximum benefits to the host plants after inoculation (Manikandan et al., 2010; Schoebitz et al., 2012). Different kinds of carriers are used in the formulation process which affects the overall quality and efficacy of the biofertilizers (Bashan et al., 2014; Herrmann and Lesueur, 2013). Granular inoculants showed good results under stressed soil conditions (Clayton et al., 2004; Lupwayi et al., 2006). Encapsulation of the microbial strain into polymers allow diverse compositions and structures (Vassilev et al., 2005) but, have limitations for commercial production (Bashan, et al., 2014; John et al., 2011). Use of additives might improve the shelf life of the product (Bashan et al., 2014; Malusà et al., 2012; Herrmann and Lesueur, 2013) with introduction of specific substances to enhance the efficacy of biofertilizers.

3.1. Non-Climatic Factors

Apart from climate several other non-climatic factors has to be considered before selection of proper greenhouse technology, which are listed in the following text.

1. Location and selection of site: The ideal location for greenhouse cultivation is an area having moderate climate with high sunlight, low humidity and good natural drainage. It is better to avoid storm prone areas or it is a must to take necessary protection, like wind-break and shelter belt, in such areas. However, selection of site, where the greenhouse will be constructed, is the first consideration to select the proper greenhouse technology. The proper selection of site will also depend upon various non-technical factors, which are listed below.

Postharvest loss of fruits and vegetables is defined as “that weight of wholesome edible product (exclusive of moisture content) that is normally consumed by human and that has been separated from the medium and sites of its immediate growth and production by deliberate human action with the intention of using it for human feeding but which for any reasons fails to be consumed by human.” Not only quantity and quality but even the appearance of fruits and vegetables are affected, and their market value is reduced. Most ‘skin deep’ injuries such as ‘fly speck’ in apples do not affect the edible part. Some infections are not harmful as they occur on inedible parts and can be trimmed off before consumption ego Colletotrichum spots on the outer leaves of cabbage]. Fresh fruits and vegetables are perishable and highly prone to these losses because they are composed of living tissues. These tissues must be kept alive and health throughout the process of marketing. These are composed of thousands of living cells which require care and maintenance (Alao, 2000). The pathological rots are the most serious which is followed by mechanical injury. Pathological rots in combination with mechanical damage cause serious damage to the perishables. Environmental factors such as temperature, relative humidity and oxygen balance most especially during storage are also greatly responsible for damage also environmental conditions such as temperature and humidity are responsible for rendering fruits and vegetables susceptible for pathological attacks (Yahaya and Mardiyya, 2019). Fungi and bacteria are the major pathogens, which cause postharvest diseases in crops leading to about 30 % loss. Normally diseases will be more at improper temperature and relative humidity. Apart from causing disease, pathogens are also involved in ethylene production, which hastens the deterioration of the product.

8.1 Introduction

There are many theories that deal with the generation of innovations, their diffusion and adoption or non-adoption by the end users. Such theories include actor-network theory, knowledge systems and network theory, strategic niche management theory and adoption and diffusion of innovations theory (Rogers and Shoemaker, 1971; Rogers, 1983, 1993, 2003). Among the different theories, the diffusion and adoption theory has achieved a prominent position in the field of anthropology, sociology, public health, medical sociology, communication, marketing and management, economics, public administration, industrial engineering, geography and many other disciplines all over the world for more than half a century. The main elements of diffusion of innovation as identified by Rogers (1962) are: i) An innovation, ii) Communication channels, iii) Time and iv) Social system. This shows that diffusion of any innovation will take place only if a new idea or practice exists which is accepted by an individual or a group of people over a period of time. The rate of diffusion depends upon the availability of communication channels and structure of the social system. But, in 1966, Fliegal and Kivlin complained that the diffusion of innovation has the status of a basted child with respect to parent’s interest in social and cultural change: Too big to ignore but unlikely to give full recognition.

The sustainable agricultural practices include integrated pest management (IPM), integrated nutrient management (INM), soil conservation and water management. However, there is not a single technological innovation were the innovator/company that commercializes a technology is not interested whether it is adopted/purchased by the consumer.

6.1 Hal for Land Preparation: This plough is constructed from Babool, sal, sisham wood, and mild steel. The body and handle are made from one piece, with a separate shoe. It is operated by one pair of bullocks with a yoke, weighs 48 lbs, and can cover 0.8 to 1 acre per day. It works to an average depth and width of 5 and 6 inches in alluvial soils, with a draught requirement of 185 lbs. It is used by 100% of the farming community in Meerut, Uttar Pradesh. (ICAR, 1960)

6.2 Wetland Plough (Dammu Nagali) for Land Preparation: This plough is made from Babool, palmyra, and mild steel, weighing 30-40 kg. Operated by two bullocks and one man, it is attached to the yoke with ropes for puddling rice fields, covering half an acre per day. It has a draught of 200-220 kg and ploughs to a depth of 4-5 inches and width of 5-6 inches in black and red soils. Repairable locally, its annual maintenance costs range from Rs 0.5 to 1.0, with an operational cost of Rs 25 per hectare. It is widely used in the coastal belt of Andhra Pradesh (Guntur and West Godavari). (ICAR, 1960).