eChapters

Definition of farmer (National Policy for Farmers, 2001): A person actively engaged in the economic and/or livelihood activity of growing crops and producing other primary agricultural commodities and will include all agriculture operational holders, cultivators, agriculture labourers, share croppers, tenants, poultry and livestock rearers, fishers, beekeepers, gardeners, pastoralists, non-corporate planters and planting labours, as well as persons engaged in various farming related occupations such as sericulture, vermiculture, and agroforestry. It also includes tribal families/ persons engaged in shifting cultivation and in the collection, use and sale of minor and non-timber forest produce.

2.1. What is Greenhouse Technology?

Greenhouse technology involves primarily the structural design that can take care of climate control mechanisms to create proper micro-crop-climate and secondarily it involves the technology needed for optimum growth and production of crop grown under this structure. Combination of these two aspects may be expressed as ‘greenhouse technology’.

So the ‘greenhouse technology’ may be defined as “The technology required to built a structure, covered fully, partly or porously for manipulating the inside climatic conditions, under which crops/plants can be grown with special measures”.

Physiological plant disorder is caused by non-pathological conditions such as poor light, weather damage, waterlogging or lack of nutrients affect the operation of the system caused. Physiological condition selected from diseases caused by plant pathogens such as viruses or fungi to distinguish. Although the physiological disorder symptoms may occur such as disease, they can often be prevented by changes in environmental conditions. However, once the nutritional deficiencies of plants showing symptoms, is likely to return that season yield will be reduced.

Nature has made such a beautiful system that a fruit does not spoil unless its outer covering is removed and till it is there on the plant. For example banana will not spoil for long time if we do not remove its peel. Similar is the case with apple, guava, mango and many other fruits and vegetables. But as soon as the outer covering is removed the damage begins and the commodity is spoilt very soon.

Preservation is extending shelf life of fresh or processed food by using various methods and prevention or reduction of spoilage. Better the preservation, lesser the spoilage, more the spoilage poorer and inefficient is the preservation.

Therefore, in order to prevent or reduce the spoilage, we have to first identify and understand the causes of spoilage. There are chiefly 3 agencies that cause spoilage in fruits and vegetables i.e. (i) microorganisms, (ii) enzymes & chemical changes and (iii) man, animals, rodents, insects, etc. For effective preservation we have to check the growth and activity of these spoilage causing agencies. So, in order to prevent spoilage and preserve a perishable commodity for long time the following principles and methods are to be followed.

3.1. Introduction

Food preservation can be defined as the science which deals with the process of prevention of decay or spoilage of food thus allowing it to be stored in a safe condition for future use. Scientifically, preservation may be defined as a science which deals with the process for prevention of decay. All foods gradually undergo deterioration or spoilage from the time they are harvested or manufactured. Some commodities spoil rapidly, while others can keep for longer but limited periods. Spoilage in the food products may be caused due to some physical, chemical and microbial changes during storage. The preservation of these products can be resulted by controlling following physical, chemical and microbial changes.

Generation system of seed multiplication is nothing but the production of a particular class of seed from specific class of seed up to certified seed stage. The choice of a proper seed multiplication model is the key to further success of a seed programme. This basically depends upon,

• The rate of genetic deterioration
• Seed multiplication ratio
• Total seed demand (Seed replacement rate)

ABSTRACT

Of the total production of the crop yield, only 63 per cent is available for human consumption. The remaining is lost in more or less equal proportions to weeds, pests and diseases. Prior to genetic engineering, the exchange of DNA material was possible only between individual organisms of the same species. In the field of agriculture for instance, farmers have continuously modified naturally occurring species through seed selection and controlled breeding. With the advent of the recombinant DNA technology, it has however been possible to identify specific genes associated with desirable traits in one organism and transfer those genes within and beyond the boundaries of species into other organisms.

1. Genes for herbicide resistance

Modern agriculture has developed a range of effective herbicides to tackle the effects of weeds on crop yield. Some of the most useful of these are broad-spectrum herbicides because they are active against a wide range of weeds. However, these can only be used at times when the crop is not itself vulnerable to herbicide action. The development of herbicide-resistant crops therefore offers the opportunity to spray crops at the most effective time to kill weed species without damaging the crop plants. By definition, herbicides are much more toxic to plants than to animals. Therefore, it is not surprising that they generally affect ‘plant-specific’ biological processes. The herbicidal activity of many herbicides has been found to result from the specific inhibition of a single enzyme/protein. The following are four distinct strategies for engineering herbicide resistance: i. Overexpression of the target protein, ii. Mutation of the target protein, iii. Detoxification of the herbicide, using a single gene from a foreign source and iv. Enhanced plant detoxification.

Random Mating

Random mating occurs when each female gamete has an equal chance of being fertilized by any male gamete of the same plant or with any other plant of the population and, furthermore, there is an equal chance for seed production. It is not possible to achieve true random mating in plant breeding because selection is involved. Consequently, it is more realistic to describe the system of mating as random mating with selection. Whereas true random mating does not change gene frequencies, existing variability in the population or genetic correlation between close relatives, random mating with selection changes gene frequencies and the mean of the population, with little or no effect on homozygosity, population variance, or genetic correlation between close relatives in a large population.

Horticulture deals with the art, science, business and technology of cultivation and management of horticultural plants. The word Horticulture is derived from two Latin words viz. ‘Hortus’ (means garden) and ‘Culture’ (means growing). Horticulture is an aesthetic science that deals with cultivation of fruit, vegetable, spice, plantation, medicinal, aromatic and flower crops. There is a vast therapeutic use of horticulture wherein gardening and aroma therapy are used to deal with new age maladies like depression and various addictions.

In ancient times, huge gardening spaces to grow large number of fruits, vegetables and flowers were available and these areas were demarcated with the help of high walls. This enclosed area was referred to as garden. This led to the term garden culture. The land area is decreasing due to industrialization and population growth, at the same time, there is a drastic increase in demand for horticultural produce. To meet the increased demand for horticultural produce and to cope up with the space constraints, multitier cropping systems, vertical gardening and other intensive cultivation practices are being resorted to. Hence, horticulture may also be described as the “Practice of growing and manipulating plants in a relatively intensive manner”.

Presently, fruits, vegetables, flowers and ornamentals are grown not only within the home premises, but also in large quantities on a commercial scale. In other words, many horticultural crops throughout the world are grown primarily as business enterprises. Thus, horticulture has two aspects in general i.e., the amateur and the professional. In addition, with the establishment of horticultural experiment stations as an integral part of colleges and universities, comparatively a large amount of scientific information on the behaviour and cultivation of horticultural plants and products is freely available. This information or literature, constitutes the science of horticulture, and the application of this scientific information constitutes the “Technology of Horticulture.” Thus, present day horticulture may be defined as the science and technology of production, processing and merchandising of fruits, vegetables, flowers and ornamentals where each crop has its own science and technology. Consequently, horticulture may appear differently to different people. To a teacher, professor, research scientist, extension official and landscape architect, it is an applied science and a profession, while to a commercial producer, wholesaler, a retailer of horticultural products, or to the manufacturers or seller of horticultural products, it is a business. It is also a fascinating hobby for connoisscur.

Abstract

Genetic analysis of yield and yield components in tomato (Lycopersicon esculentum Mill.) was worked out by using half diallel mating design. The good general combiners observed were Solan Vajr, FT-5 and UHF-265 for plant height; UHF-107 and UHF-260 for days to first picking; Solan Vajr for number of fruits per cluster; FT-5, EC-191536 and UHF-120 for average fruit weight; Solan Vajr, UHF-265 and FT-5 for harvest duration and FT-5 and Solan Vajr for marketable yield per plant. The best three specific combiners for marketable yield per plant were EC-191536 x Solan Vajr, BL-342-1 x FT-5 and UHF-107 x EC-191536. Hayman’s approach revealed non-allelic interaction in the expression of number of fruits per cluster, number of fruits per plant and marketable yield per plant. Preponderance of non-additive gene action was observed with dominance towards tallness, delayed first picking, more fruits per cluster, longer harvest duration and higher marketable yield, while involvement of complimentary epistasis was indicated in the inheritance of average fruit weight and number of fruits per plant.

ABSTRACT

Though the genetic control of sex determination is being explored in several animal systems, no much information is available on the genetic basis for sex specificities in dioecious or sexually polymorphic plant species. Date palm is a unique member of the family Palmaceae which exhibits dioecy. Here we report the sex-specific variation in the genomic DNA of male and female date palms as revealed from an extensive study conducted with palms representing different date palm growing regions of the Kingdom of Saudi Arabia. The genomic DNA content in females was less than 60 per cent compared to those of the male genotypes. Polymerase chain reactions carried out to amplify different segments of the alcohol dehydrogenase (AdhA) gene from the date palm genomic DNA yielded two DNA fragments each in the female genotypes where as the same primers amplified a single fragment in male plants. Genomic Southern analysis of Eco R1 restriction digests showed RFLP between the male and female genotypes with the male plants showing a single hybridization signal of approximately 14 kb size and the females showing six additional bands of varying molecular weights. The results of our investigations reveal the potential of molecular biology in differentiating the sex in date palm at DNA level. Further research is needed to develop DNA markers that will help to unequivocally identify the sex of dioecious plants at the seedling stage.

Plant breeding is the purposeful manipulation of characters in plants to create new genotype with a set of desired characters. Hence, it may basically be referred to as designed manipulation of the heritable variation for the character concerned. Living organisms possess the remarkable capacity to convert the non-living materials into living staff, which results in movement, growth, metabolism and reproduction, and thus continuity of living organisms from one generation to the next is accomplished. The continuity of life through transmission of characters is the subject of the study of heredity, while the resemblances and differences between individuals of the same or different generations is the concern of the study of variation. These two universal processes of continuity and of change, which are referred to as “Heredity” and “Variation” are primary consequences of all organisms. Organized study of these two biological processes is the science of Genetics.
Plant breeding, which may be termed as evolution of plant type directed by the will of mankind, is basically the process of selection of character(s) from heritable variation. Desirable heritable variations can also be induced through some genetic consequences like, hybridization, segregation, mutation, changing the number of chromosomes, etc. So frame of plant breeding lay on three basics:

11.1 Introduction

In chapter 10, we have discussed the different types of variation, namely, genetic, environmental and genotype × environment interaction variations. We have also learnt how to estimate the phenotypic variance and its components including genotypic (also called genetic), environmental and g × e interaction variances from trial data. Now in this chapter, we shall discuss on the genetic components of polygenic (quantitative) variation and its implications on breeding strategies.

11.2 Genetic Components of Polygenic Variation

In this chapter whenever we call genetic variation, we mean polygenic (quantitative) variation, and we know that variation is usually measured in term of variance. However, variation, variability and variance are almost used synonymously. The genetic variance has been classified into different components by various workers. Fisher (1918) divided genetic variance into three components: additive, dominance and epistatic (interaction) variances. Wright (1935) classified genetic variance into two components: additive variance and non-additive variance (dominance and epistatic variances). Mather (1949) classified genetic variance into two components: heritable fixable variance (additive variance and additive × additive epistatic variance) and heritable non-fixable variance (dominance variance, and additive × dominance and dominance × dominance epistatic variances). Later, Hayman and Mather further divided the epistatic variance into three categories: additive × additive, additive × dominance and dominance × dominance.

ABSTRACT

India is the largest producer of banana, contributing to 17.3 per cent of the global production. In Kerala, it is the leading fruit crop, being cultivated in an area of 99,412 ha with an annual production of 7,31,650 tonnes. Biodiversity in the cultivars of banana, which consist of triploids, is complex especially in Nendran. Nendran belonging to Musa AAB plantain subgroup is the leading banana cultivar of the Kerala. in Kerala, several landraces are available, cultivated in different parts, known in different local names. Twelve Nendran ecotypes of banana belonging to AAB genomic group were collected from Banana Research Station, Kannara, Banana Nursery Farm, Palode and Instructional Farm, College of Agriculture, Vellayani to ana lyse genetic divergence using RAPD marker and morphological traits. Out of the forty one decamer primers screened for RAPD analysis, 34 could produce amplification. Twenty five primers showed high level of polymorphism. Finally, six of the most promising primers viz., OPA-01, OPA-03, OPA-13, OPB-04, OPB-10 and OPB-12 were used for RAPD analysis. Statistical analysis for the morphological traits and RAPD marker were conducted using the software programme NTSYS pc version 2.02e. The matrix average taxonomical distances (similarity coefficient) among the ecotypes ranged from 0.59 to 1.00 in RAPD profiles and morphological profiles (dissimilarity coefficient) ranged from 2.82 to 11.21. In the dendrogram (RAPD profiles), Koonoor Ethan showed the maximum genetic divergence. Quintal banana and Zanzibar came under a single clusters at a distance of 0.79 and clustered together at a distance of 0.82. Both the ecotypes showed next higher genetic divergence among the Nendran ecotypes. In the case of morphological traits, the same trend could be observed. Koonoor Ethan showed the maximum genetic divergence at a distance of 11.21 and Quintal banana showed next higher genetic divergence at a distance of 9.11. Koonoor Ethan, Quintal banana and Zanzibar were distinct ecotypes among the Nendran ecotypes of Kerala

ABSTRACT

The investigation aimed at to examine the diversity among nineteen wild and cultivated germplasms of the genus Vigna namely, V. trichuriensis, V. hainiana, V. radiata, V. aconitifolia, V. minima, V. sinensis, V. radiata var. sublobata, V. radiata var.setulosa, V. umbellata, and allopolyploid of BR3x T9 at DNA level follwing Random Amplified Polymorphic DNA (RAPD) technique. Ten random decamer primers were used in amplification reactions, five of that were reproducible and clear. The five primers constituted 55 bands of, which 9 are polymorphic. The similarity index based on 0 and 1 matrix of banding was calculated and dendrogram following UPGMA was constructed. The germplasms formed altogether 4 clusters on the basis of 0.375 linkage distance. The first and second cluster consisted of single genotype of V. hainiana. and V. minima respectively. The third cluster comprised wild and cultivated types of V. sinensis. The 4th cluster on the otherhand, consisted of genotypes belonging to V. radiata, V. radiata var. sublobata, V. mungo, V. radiata var. setulosa, V. trichuriensis and allopolyploid of BR3 and T9. The wild forms of different species were found to exist in the same cluster as their cultivated form. The three mungbean genotypes namely B105 (V. radiata), B1 (V. radiata) and BR3 (V. radiata )are crossable within themselves and they belonged to the cluster -IV.The intercluster cross between different clusters would like to generate new genotypes with wide variability. Based on limited range of accessions tasted in the present investigation, the approach holds promise for the classification of Vigna germplasm, identification of Vigna and marker assisted breeding in Vigna.

Introduction

Genetic resources are the building blocks for new varieties. The Indian gene centre is floristically extremely rich. Most of the tropical and sub-tropical fruits believed to have originated from Hindustan and Indo Malaya-Region. Hindustani gene centre possess a rich diversity of 152 crop plants distributed in different agro-ecological regions of India (Arora, 1985). The Indian sub-continent is one of the centers of origin and diversity of vegetables crops. Around 80 species of major and minor vegetables occur in wild forms (Choudhury, 1967, Seshadri 1987). Among the 118 genera belonging to the Cucurbitaceae family Cucurbita, Cucumis, Citrullus and Lagenaria genera are of great importance. There is tremendous genetic diversity within the family, genera and even within species level. The adaptation range varies from tropical and subtropical regions to extreme arid desert and in temperate regions from Tarai belts to higher altitudes. Extreme germplasm collections are maintained at different centers of the world which represents valuable resources for breeding even in wild form, primitive cultivars, landraces/ folk varieties/ farmer’s selection in a much localized pockets. Now we have very good strains for highly nutritive value, multiple disease resistant and extended shelf lives from our local material through intensive breeding.

Indigenous plant germplasm are adapted component of plant biodiversity. Such adapted components are more valuable resources either as a cultivar or as a parental line in hybridization programme. It might be also a putative material for biotechnological treatment for tolerance to biotic, abiotic factors or nutritional and quality components. Indigenous germplasm can be basically of two types, one which has been domesticated and subjected to human intervention, the other one may be called wild plants or wild relatives and still in the process of evolution without the human intervention. Biochemically the cucurbits are characterized by bitter principles, called cucurbitacins. Great variety of cucurbits contains bitter principle in portion of the plant at some stage of development. Cucurbitacins are tetracyclic triterpenes having extensive oxidation level. Bitter principals found in roots differ from those in fruits. Seedlings specially radicals contains cucurbitacins which are considered primary. The pollen also carries bitter principles and hence when bitter pollen fertilized non-bitter ovule the resulting fruit will be bitter known as metaxenia effect. Cucurbits are consumed in various forms i.e. salad (cucumber, gherkins, longmelon), sweet (ash gourd, pointed gourd), pickles (gherkins), deserts (melons) and culinary purpose. Some of them (e.g. bitter gourd) are well known for their unique medicinal properties. In recent years, abortifacient proteins with ribosome-inhibiting properties have been isolated from several cucurbit species, which include momorcharin (from Momordica charantia), luffaculin (from Luffa operculata), trichosanthin (from Trichosanthes kirilowif) and beta-trichosanthin (from Trichosanthes cucumeroides). Among these, Trichosanthin is of particular interest because its ribosome-inhibiting properties have been found to be effective in inhibiting the replication of human immunodeficiency virus (HIV), indicating its potential as a therapeutic agent for AIDS. In cucurbits three conditions are found (i) fruit and vegetative parts bitter (ii) fruit not bitter but vegetative parts bitter (iii) bitterness absent in both vegetative parts and fruits. Hence some kind of co-evolutionary relationship between cucurbits found and they are very helpful during evaluation of germplasm.

Vegetables are of short duration, have higher productivity and give more return per unit area, besides giving nutritious food to human being and can be fitted in different farming systems. They also play a major role in balancing human diet, thereby helping in alleviating hunger, poverty and malnutrition. Because of the public awareness for the significance of vegetable consumption, the demand of vegetables in the global market has increased immensely. Thus, vegetable farming is becoming profitable venture globally, opening avenues of self employment and revenue generation (Anon., 2009). At global level, India holds second position, next only to China in vegetables production with a share of about 14%. The present annual vegetables production of country is about 175 million tons from an area about 10.3 million ha with a productivity of 17.1 t/ha. India grows largest number of vegetables in the world, as having a spectrum of wide range of agro-climatic situations, ranging from dry temperate to humid tropics between the altitudes from sea level to snow line.

The Indian hot arid region is one of the most important arid ecosystems of the world in terms of biodiversity it possesses. This arid region spreads over 31.7 mha, occupies major part of north western India including Rajasthan, Gujarat, Punjab and Haryana, which together contribute 73% of arid region. High temperature, wind velocity, low humidity, low and erratic rainfall and high potential evapotranspiration are important characteristics of this region which narrowed down the choice for vegetables, besides permit their low productivity.

ABSTRACT

Of the several PCR techniques developed during the last two decades, random amplified polymorphic DNA (RAPD) offers a simple and economical means of genotype characterization. The information obtained through RAPD characterization is extensively used for the identification of genotypes, screening of duplicates, assessing genetic diversity and monitoring the genetic stability of conserved germplasm. The present study is a report on the DNA fingerprinting of P. nigrum and P. longum cultivars. Fourteen land races and three advanced cultivars of P. nigrum and eleven land races and one advanced cultivar of P.longum were used in the present study. Forty decamer primers from Operon Tech were screened using two representative genomic DNA samples of black pepper. Of these, 10 primers that yielded clear and dominant band patterns were selected for the final analysis of the 29 accessions. These generated 119 amplification products. The total number of markers per primer varied with respect to both P. nigrum and P. longum. Cultivar specific single bands were obtained for a few land races and accessions of both the Piper species.

Cocoa (Theobroma cacao L.) represented as ‘Food of Gods’ is considered as an important beverage crop next to Tea and Coffee. The economic produce of cocoa is the bean, when it is fermented and dried, become the source for chocolate. Cocoa is native to Amazon basin of South America and is domesticated and distributed to different regions by the natives Mayas, Aztecs and Pipil- Nicaraos (Wood and Lass, 1955; Young, 1994) who consumed it as an energy drink called ‘xocoatl’ by roasting and grinding cocoa beans. When Spanish conquered Mexico in 16th century they took cocoa to Europe which is christened as ‘chocolate’ the worlds’ favourite food. From then on cocoa spread to many other countries (Wood, 1991). According to World Cocoa Foundation, currently 40–50 million people depend on cocoa for their livelihood and the production is 3.97 mt in which Africa contributes 71%, Latin America 14% and Asia and Oceania 14% (Jean Marc Anga, 2013). Ivory Coast is the major producer followed by Ghana, Cameroon, Nigeria and Brazil. In Asian continent, Indonesia and Malaysia are the leading producers (www.wcf.org.).

The Para rubber tree (Hevea brasiliensis) is the most important commercial source of natural rubber, a strategic raw material. Rubber is an indispensable commodity used in the manufacture of over 50,000 products worldwide. This crop has therefore emerged as a key plantation species in various countries. The global area under rubber  cultivation is about 9.6 million hectares producing 9.2 million tones annually (IRSG, 2014). Among the major natural rubber producing countries, India occupies 4th position in terms of production with 0.91 million tones and more significantly the first position in average productivity of 1823 kg/ha/year. The major rubber producing countries are Thailand, Indonesia, India, Malaysia, Vietnam and Sri Lanka. Rubber is also commercially cultivated in Philippines, Nigeria, Cameroon, Cote de Ivoire, Liberia, Brazil, Cambodia, Nigeria, Cameroon, Guatemala, Myanmar, Mexico, China, Ghana, Democratic Republic of Congo, Gabon, and Papua New Guinea.Increase in production and improving productivity of NR continues to be the subject of considerable research efforts, particularly in the context of the widening gap between demand and supply of natural rubber. Over one million small farmers  in India owning less than 0.5 ha. of land depend on rubber cultivation for a livelihood.