eChapters

Seed treatment refers to the application of chemical or biological substances to seeds before planting. This process is designed to protect seeds from diseases, pests, and other adverse conditions that may affect germination and early growth and can improve overall crop yield and quality. Seed treatment can involve the use of fungicides, insecticides, bactericides, and other agents that help improve seed health and vigor. Seed treatment is a crucial step in ensuring healthy crop production. By investing in seed treatment, farmers can achieve better crop establishment and reduce the need for subsequent interventions, leading to more sustainable and cost-effective agricultural practices.

4.1 Importance of Seed Treatment

1. Disease Control: Seed treatment helps to protect seeds and seedlings from soil-borne and seed-borne pathogens, reducing the risk of diseases that can impair seed germination and seedling growth.

2. Pest Protection: Treated seeds are less likely to be damaged by insects and other pests that may be present in the soil. This protection can lead to higher seed survival rates and better crop establishment.

3. Improved Germination: By reducing the incidence of diseases and pests, seed treatment can enhance the germination rate and uniformity of seedlings, leading to more robust and consistent crop stands.

4. Nutrient Provision: Some seed treatments include nutrients or growth promoters that help improve seedling vigor and early development, ensuring that young plants have a better start.

5. Resistance to Environmental Stress: Seed treatments can help seeds withstand adverse environmental conditions such as drought, salinity, and temperature fluctuations, improving the overall resilience of the crop.

5.1 Introduction

A theoretical system is what we construct in one mind’s eye to model the empirical system. Theories and models provide the researcher concepts, definitions’, variables and hypothesis that may be tested by analyzing relevant data (Bhatia, 1990). A theory emerges from the research and so does a particular research pursuit from the theory. The theory is a set of interrelated constructs, definitions and propositions that present a systematic view of phenomena by specifying relations among variables, with the purpose of explanation and predicting the phenomena (Kerlinger,1973). A researcher seldom conducts research without any concern for theory. A theory provides major orientation to research by helping to define the type of data to be collected and theory emerges from facts (data) collected during research. Theory and facts are not opposed but intervened, the theory is not speculation and scientists are concerned with theory as well as facts (Anonymous, 2011). It is possible to conduct evaluation without paying any attention to theory and forms of evaluation, but such evaluation studies lack internal validity because these are not based on the rigorous evaluation research methodologies (Campbell and Stanlay,1966). According to Alkin and Christie (2004), evaluation has grown on three pillars of orientation i.e. research orientation, decision making orientation and assessing worth. The field of evaluation research can be defined as “the use of scientific methods to measure the implementation and outcome of programmes for decision-making purposes” (Rutman, 1984). The concept of evaluation research has been an issue of debate among academicians. The academicians consider that evaluation research differs from both basic research as well as applied research (Douglah, 1998).

Introducton

The Working Group Report of Fifth Assessment Report 2013, by UN’s Inter governmental Panel on Climate Change (IPCC) says, that to limit warming to a rise of 2ºC above pre industrial levels, 1000 gigatones (trillion tons) is the upper limit of CO₂ that can be emitted. However, by 2011, we have already emitted 531 gigatones since last 260 yrs and in next 25 years, we will cross 1000 gigatones limit. There is a clear long-term global warming trend. Notably, the 20 warmest years have all occurred since 1981, and the 10 warmest have all occurred in the past 12 years.

Prevailing climate and weather conditions play crucial role in production and quality of various fruits including mango (Mangifera indica L.). In India, mango has 2.3 million ha area with annual production of 20.5 million tonnes and average productivity of 8.9 t/ha. However, erratic precipitation and high temperature during flowering and fruit setting induced mainly due to climatic disturbance in the recent past had adversely impacted the production potential of mango in subtropics. Analysis of twenty years (2001-02 to 2021-22) weather data of ICAR CISH, Lucknow, indicated that average annual rainfall of the region is 956.41 mm spread over 25-30 number of rainydays.

INTRODUCTION

Potatois an important crop for food and nutritional security of India. Itis mainly grown as rabi crop and 90 per cent of itscultivation is confined to northern Indo-Gangetic plains comprisingthestatesof UttarPradesh, WestBengal,Bihar, Punjab and Haryana. Due to climate change, the main potato season is likely to be warmer than the rest of the seasonsof the year and will affect seriously the potato production in India. Climate change is defined by Intergovernmental Panel on Climate Change (IPCC) as a plausible future climate thathas been constructedfor explicitusein investigatingthepotential consequences of climate change. It is the difference in climate over a period of time (with respect toa base line or a reference period) and corresponds to a statistically significant trend of meanclimate or itsvariability persistent over along period of time. Climate change may be due to both natural aswell asanthropogenic factors. Reference periods are typically of three decadesused as climatological baseline period in impacts and adaptation assessments to Global climate model. The future climate minus baseline climate are used for model scenario comparison of most climate variables. Typically a number of fixed time horizons in the future are produced from model output.For example 2020 (2010-2039), 2050 (2040-2069), 2080 (2070-2099). Future climates are estimated through models, called global circulation models, or global climate models (GCM). GCM simulations are carried out by means of a large set of heavy computations. The IPCC TAR reported 7 GCMs for developing climate scenarios while IPCC FAR reported 21 different GCMs.

Introduction

Indian subcontinent has a rich and varied heritage of bioresources, encompassing a wide spectrum of habitats from tropical rain forests to alpine vegetation and from temperate forests to coastal wetlands. It is one of the eight centres of origin and one of the 12 mega centres of the world. It possess 11.9 % of world flora and about 33% of the country’s recorded flora are endemic to the region and are concentrated mainly in the North-East, Western Ghats, North-West Himalayas and the Andaman and Nicobar Islands. Of the 49,219 higher plant species, 5,725 are endemic and belong to 141 genera under 47 families. Of theses 3,500 are found in the Himalayas and adjoining regions and 1,600 in the Western Ghats alone. India has 26 recognized endemic centres that are homeland

INTRODUCTION

Genetic engineering (GE) and genetically modified organisms (GMOs) provide powerful tools for sustainable development in agriculture, healthcare and many other industries. GMOs are those which were genetically engineered in a laboratory by incorporating a small foreign DNA fragment carrying a gene of interest into the native DNA of the organism. The foreign gene is attached with the necessary regulatory elements to help its expression in the new genetic environment. Genetically modified (GM) crops currently account for some 16 percent of the world’s land planted with soybean, maize, cotton and canola. The global demand for food is increasing because of the growing world population and decreasing arable land. At the same time food and agricultural systems have to respond to several changes such as increasing international competition, globalization and rising consumer demands for improved food quality, safety, health enhancement and convenience. Modern biotechnology involving the use of rDNA technology/genetic engineering has emerged as a powerful tool with many potential application for improving the quantity and quality of food supply. Foods derived from genetically modified crops, commonly referred to as genetically modified food and food ingredients have already become available worldwide with aim of enhancing productivity, decreasing the use of certain agricultural chemicals, modifying the inherent properties of crops, improving the nutritional value or even increasing shelf life. Results of DNA modification may not be limited only to the particular characteristics of the replaced gene. It is therefore important to ensure that when these organisms are released into nature they do not harm the environment or human health [EFSA, 2006]. Such concerns have led to broader interests in the theme of risk assessment in the release of GMOs. A cautious approach is necessary to assess environmental risks which may occur due to introduction of recombinant organisms in the natural environment [Johnson et al., 2007].

4.1 Introduction

There is no widely accepted methodology for evaluation of IPM programmes. It would be fair to say that commonly accepted methodology for evaluation of the IPM programmes is still under development. Three international workshops supported by the Global IPM Facility were held to discuss and review progress in the development of methodologies and guidelines for the evaluation of IPM, particularly of those programmes/projects using the FFS approach (van den Berg and Jiggins, 2007). The need to combine economic and social science approaches was identified by the participants as a major challenge (Waibel et al., 1999). The recommendations of these workshops are:

“Firstly, the methods of impact assessment and evaluation presented by experts from different fields revealed that despite for the many definitions’ about IPM, there was broad consensus that IPM is about avoiding pesticides dependence and about achieving a socially defined level of pesticide use even though there are many types of IPM intervention. They range from ordinary farmer training to sophisticated ‘Farmer Field School’ approaches. Effective communicated research results that challenge existing paradigms and case studies that draw the attention of politicians and civil society can be subsumed under IPM intervention.

Secondly, need for a document that outlines good practices for IPM evaluation is urgent, because of the diversity of IPM intervention that already exist and that can be further expected. Virtually all groups involved in crop protection, including the chemical companies, label their own concept of IPM as it is a free good that can be taken, reproduced and modified by anyone. Hence, IPM can only be measured by its results and no longer by its inputs.

Thirdly, the different groups who participated in the workshop advocated different approaches to evaluation. There were those who see cost-benefit analysis (CAB) as the major tool of evaluation and wanted to refine this tool by adding economic evaluation of environmental impacts and by applying contingent valuation methods and willingness to pay concepts. Others believe that evaluation should not be a checking procedure but should be designed in the spirit of a joint learning experience. Thus, there was a difference of opinion among the economists on the one hand and anthropologists’ and extension specialists on the other hand. But, lastly, it was concluded that there is a need to set standards which must be met if CBA is going to provide the information that facilitates decision-making.

Introduction
Forecasting of future weather conditions are based upon the collection and analysis of meteorological observations. With the help of advanced computing system and satellite data, the accuracy of weather forecasting is improving day by day. Weather forecasts may be classified according to the space and time scale of the predicted phenomena. With advanced technology, the spatial resolution of accurate forecast is enhanced and India Meteorological Department (IMD) has started to issue the Block-level forecast. The meteorological phenomenon can be distinguished among three classes of phenomena with a scale that is larger than the turbulent microscale: the mesoscale, synoptic scale, and planetary scale (Geer et al., 2018). Considering the variability of agro-climatic condition of India, the micro-level weather based agro-advisory has great importance to enhance the farm income. IMD has initiated the Block-level Agromet Advisory Services (AAS) in collaboration with Indian Council of Agricultural Research through establishment of District Agromet Units (DAMUs) at various Krishi Vigyan Kendra’s (KVK). Improvisation of the existing District-level Agromet Advisory Services (AAS) and starting of Block-level services are the basic objectives of DAMU. The District Agromet Units will act as nodal centre to prepare and disseminate the crop and locationspecific AAS to farmers at block level. Apart from this, the micro-level Agromet Advisory Service was implemented at NICRA (National Innovation on Climate Resilient Agriculture) villages through a network project of Indian  Council of Agricultural Research (Banerjee et al, 2018; Chakraborty et al., 2018). As a part of the nation-wide program, the feasibility of village level agromet advisory has been assessed. Thus, the importance of micro-level  agromet advisory and advisory on extreme weather events are discussed in this chapter.

Apart from insects, pests and diseases, physiological disorders are one of the major threats to fruit industry which cause financial losses global. Over-all, the problems rise due to unfavorable environmental conditions and improper cultural practices which affect the normal plant growth and development is called as physiological disorders of plant. Ladaniya (2008) stated that the physiological disorder is that it is a function of physiological processes fruit tissue abnormality or failure due to abiotic stress, such as temperature, relative humidity, water stress, chemicals/ nutritional excess and deficiency.

The performance of plants is affected by the soil in which it grows and climate and micro climate of its surroundings.

Impact of soil

The soil provides anchorage, nutrients and water for plant growth. Soil fertility status, structure and texture influence the plant growth and productivity.

Classification of soil

On the basis of the organic and inorganic contents and particle size and texture, the soils have been classified. The inorganic matter in the soil constitutes of varying amount of sand, silt and clay, on the basis of which the soils are classified as follows.

Sandy soil

These soils have coarse textured and large pore spaces, have poor water holding capacity. Retention of nutrients in this soil is very poor. This type of soil is suitable for precocious crops. Sandy soils initiate rapid root growth, hence good as propagating medium. Since sandy soils has low in nutrient content, supplementation of adequate nutrition is imperative to achieve good plant growth.

History of plant breeding
The process of plant breeding takes care of changing or modifying the genetically controlled characters of a particular variety or genotype of a crop. The practice of age-old agriculture uses the process of selection from the existing variability to save a particular quality of seed to grow better crops in the next harvest.
Gregor Mendel who is known as the father of Genetics discovered the law of segregation in the middle of the 1800s. This theory forms the base for the process of plant breeding. The primitive ways used for plant breeding are very different than what modern technology has contributed to the process of plant breeding during the 20th century.
Plant breeding is the science and art of purposeful manipulation of characters of crop species to create new varieties with a set of desired characteristics. Significance of plant breeding has been highlighted especially after the “Green Revolution”.

The Total Horticulture production of the country is estimated to be an impressive level of 314.87 Million Tonnes during 2018–19.

Production of fruits is estimated to be about 97.38 million tonnes during 2018–2019.

Production of vegetables is estimated to be about 187.36 million tonnes during 2018–2019.

Production of spices is estimated to be about 8.61 million tonnes during 2018–2019.

Plantation crops are another potential sector with lot of opportunities for employment generation, foreign exchange earnings and overall supporting livelihood sustenance of mankind at large.

In short and sweet horticulture supplies quality food for health and mind, more calories per unit area, develops better resources and yields higher returns per unit area.

It also enhances land value and creates better purchasing power for those who are engaged in this industry. Therefore, horticulture is important for health, wealth, hygiene and happiness.

Similar to forest trees these horticultural trees will maintain the ecosphere. They help in transforming the micro climate.

It provides shelter to birds, reptiles and other micro organisms and add to the geo–ecological diversity on the land.

Horticulture is of immense importance for human beings. Among these major ones are nutritional importance, economic importance, medicinal values, environmental balance, aesthetic value and recreation. These are as follows.

1. Nutritional importance: Healthy body maintains a healthy mind. Human body requires vitamins, minerals, proteins, energy, fibers, etc. for its health. Fruits and vegetables are the chief sources of proteins, carbohydrates, fats, vitamins, minerals, organic acids, fibers, etc. Consumption of fruits and vegetables keeps the human body away from several illnessess and hence are recognized as protective foods; necessary for the maintenance of human health. As per the Indian Council of Medical Research; consumption of at least 120 g of fruits and 280-300 g of vegetables per day per capita is essential. Among vegetables, 80-100 g of leafy vegetables, 100-125 g of tubers as energy source and reamaining as other vegetables. However, the consumption of fruits per capita in India is still low. In countries like Italy, France and USA; the daily fruit consumption is 308, 232 and 223 g respectively. 

1.    Total horticulture covers an area of 27.1 m ha and production 305.8 m ton in the country annually (Indian Horticulture Database, 2018).

2.    Fruit crops cover an area of 8.4 m ha and vegetable crops 12.2 m ha. Accordingly, 98.7 m ton of fruits and 182.1 m ton of vegetables are produced in the country annually (Indian Horticulture Database, 2018).

3.    Apart from fruits and vegetables, floriculture industry in India comprising of florist trade, nursery plants, potted plants, seed and bulb products is being observed as sunrise industry.

4.    The developed flower market in the country during 2018 is with area of 0.32 m ha with a production of 2.7 m ton flowers.

5.    The traditional flowers are grown on a large area on a commercial scale. These flowers are mostly grown for loose flower purpose.

6.    Area under cut flowers like rose, chrysanthemum, gladiolus, carnation and orchids is increasing day by day.

7.    Plantation crops are another potential sector with lot of opportunities for employment generation, foreign exchange earnings and overall supporting livelihood sustenance of mankind at large.

Horticulture means the cultivation of garden plants. The garden plants are comprised of fruits, vegetables, ornamentals etc. The culture covers the operation from raising and planting of saplings to the ultimate use of the products and, as such, it is the most intensive of all the agricultural sciences. However, the concept of growing plants in garden or in an enclosure does not fit well in the changed perspective where large scale cultivation of fruits, vegetables and flowers extending over several square kilometers, in many a place nowadays, delimits the boundary of garden.

Importance of Horticulture

The importances of horticulture are established not only as a source of nutritious foods but also in many other ways which are narrated in the following points:

Social- Due to the long association, the fruits are seen to have a permanent seat in the social life of man. As a consequence, various fruits have acquired their place in art, music, literature, customs and habits of various nations of the world. The description of fruit as symbolic insertion in the poems and literatures, the use of whole fruit plant or part thereof in various social festive and public gathering, and conferring titles to individuals in the name of fruits or naming a region or whole district after the name of a fruit are nothing but an indication of their popularities and social position in various countries.

Introduction
Crop production is weather dependent and almost every crop has been affected by the changing climate. The favourable weather may result bumper production sometimes or even complete destruction of crop may take place under severe weather aberrations. The number of events of sudden aberrations is increasing in a cropping period with the gradual climate change in the recent past. It has been recorded too severe in case of perennial crops. Ready to harvest crops have several times been completely destroyed due to thunderstorm or cyclone in coastal regions or even in main land. Thus, Indian agriculture is being impacted by the climatic changes, and its affect is very much visible now (Aggarwal, 2008). Horticulture sector is not escaped from its’ ill affect and new challenges are coming for production (Singh et al., 2021). The role of adaptation strategy has now been felt crucial (Babu et al., 2021; Banerjee et al., 2022) and importance of agro advisory not only protects the crops from such types of risks but also provide guidance to farmers about the right time for activities in crop husbandry (Adak et al., 2018). Issuance for improving water productivity in water limited areas (Adak and Babu, 2024), micronutrient management for nutrient richness and enhanced yield (Adak et al., 2023; Shukla et al., 2020), rejuvenating unproductive orchards (Shukla et al., 2021; Mishra et al., 2007), disease (Misra et al., 2013; Shukla et al., 2015, 2019, 2020, 2021a,b; 2022; Kumari et al., 2021) and insect pest (Gundappa et al., 2016; 2018) management are becoming very crucial and essential for the benefit of growers.

Vegetable crops, known as protective foods, are important for the healthy diet providing vitamins, minerals, fibre, amino acids and other bioactive compounds. Improvement in vegetable crops is inevitable for better yield, pest or disease resistance, morphological characters, nutritive quality, to adapt with environmental stress, climate change, offseason production, satisfying varying consumer preference etc. Vegetable crops comprise of a large number of species and are rich in diversity. Diverse genetic resources are pre-requisite for any crop improvement programme and vegetable improvement is carried out using exotic introductions, indigenous collection and hybrids/varieties by different breeding systems. Characterisation of genotypes is the description of germplasm giving information on heritable characters so that promising one can be utilised in breeding programme which is the best option for higher yield and other qualities. The morphological, physiological and molecular (biochemical and DNA) traits are called qualitative descriptor and yield, pest/disease resistance, stress tolerance etc are quantitative descriptors that are easily influenced by the environment factors. Apart from the higher production and resistance to biotic and abiotic factors, nutritional traits, flavour, processing qualities that increase the food value is also important in improvement programme of fruits as well as vegetables.

Genetic resources of vegetables available at international and national levels are characterised, evaluated and conserved. With the high diversity of vegetable crops, characterisation and evaluation of genetic resources become a stupendous responsibility requiring extensive infrastructure facilities and varying methods of evaluation (Srivastva, 2012). Genetic resources are characterised on highly heritable traits expressed across the environment. Apart from morphological characterisation, biochemical and molecular characterisation is also conducted that are useful for the identification of biotic and abiotic stress parameters, nutritional and processing quality. Genotype characterisation can be done efficiently using potential of biochemical and molecular markers that help to set up the breeding programme.

The food we eat contains nourishing substances called nutrients which are required by human body for proper functioning and maintenance of body health. They are classified into five groups such as:

Carbohydrates,

Protein,

Fats,

Minerals

Vitamins

The use of seed processing equipments helps in improving the seed quality by inducing uniformity of physical properties of seeds. This help in achieving optimum plant population and desired economic yield. In certain crops like soya bean, standard seed processing may not give desired seed quality because of sensitivity towards moisture. As general practice seed need to be dried to its safe moisture content of 9 before processing. But in case of soya bean lower seed moisture may result higher mechanical damage after standard seed processing. Drier seed are more vulnerable for mechanical damage. In this practical w try to explore the importance of moisture in seed processing and also need of alternative processing equipments like spiral graders to minimize mechanical damage.