eChapters

Reducing insecticide application to the lowest level is the motto of IPM in vegetables. Monitoring for the initial build up and timely mechanical removal of the first population is a must in vegetables. Always remove the first affected plants, by diseases like mosaic, and destroy them by burying or burning. Remove insect eggs, insect affected plant parts and adults and immature stages of insects, and destroy them every day. Do not throw them in the field. They will either come back, or pupate and attack later. During nursery stage, use wood ash, cow dung solution, and plant extracts to deter all pests. Use only low residual insecticides like Dichlorvos 1ml/l, Malathion 2ml/l, Endosulfan 2ml/l or Quinalphos 2ml/l, in spots, at the beginning of attack itself.

Introduction

Insect pests cause enormous loss to horticultural crops through direct and indirect invasion on various plant parts. It is estimated from the available information in the literature that there are about 1000 insect pests species on about 100 major and minor horticultural crops in India (Sharma et al., 2011).  The yield and quality of produce are central system point to the sustainable horticultural production. If not properly managed, pests can dramatically reduce crop yield, quality and subsequent returns. We invest a lot of time, money and natural resources into growing horticultural crops. Good pest management could protect this investment from avoidable losses.

A. Precision irrigation

The prevalent flood irrigation in crops would be the thing of past because of limited water resources, waste of water in leaching and evaporation and cumbersome management resulting in considerable loss of water. The micro irrigation (sprinkler and drip- irrigation) are preferred depending on the field topography. Undulated fields are better irrigated by sprinkler and laser levelled field by drip irrigation. There are precise tools to deliver only required amount of water at different stages of growth of crops with the help of sensors. Irrigation water volume release is mechanised and automated. Efforts of using microirrigation methods such as sprinkler and drip irrigation have been made in last three decades in many parts of the world. There is no ideal irrigation method available which may be suitable for all weather conditions, soil structure and variety of crops cultures.

Precision irrigation is worldwide accepted concept in irrigation. Precision irrigation involves the accurate and precise application of water to meet the specific requirements of individual plants or management units and minimize adverse environmental impact. Commonly accepted definition of precision irrigation is sustainable management of water resources which involves application of water to the crop at the right time, right amount, right place and right manner thereby helping to manage the field variability of water in turn increasing the crop productivity and water use efficiency along with reduction in energy cost on irrigation. It utilizes a systems approach to achieve ’differential irrigation’ treatment of field variation (spatial and temporal) as opposed to the ’uniform irrigation’ treatment that underlies traditional management systems. Precise and regulated application of irrigation water and plant nutrients at low pressure and frequent intervals through drippers/emitters directly into the root zone of plant with the help of close network of pipes is known as drip irrigation system.

Water is one of the most critical resources in horticultural production, directly influencing plant growth, flowering, fruit development, and quality. This chapter introduces principles of irrigation scheduling, water requirements, soil–water relationships, and efficient water application. Surface, sprinkler, drip, micro-irrigation, fertigation, and other modern systems are discussed in relation to crop type and environmental conditions. The chapter emphasizes irrigation efficiency, root-zone moisture management, water quality, salinity, drainage, and conservation. Proper irrigation scheduling reduces water losses and prevents both drought stress and excessive wetness. Modern technologies such as sensors, automated irrigation, and precision fertigation are also considered important tools for sustainable horticultural water management.

Water is one of the most vital components for the successful growth and development of crops. It influences most of the plant metabolic activities, namely photosynthesis, respiration, absorption, translocation utilization of mineral nutrients, etc. Its stress or in excess affects the growth and development of a plant directly and consequently its yield and quality.

Role of water: Water plays an important role in plant growth and development in many ways.

• It is the chief constituent of protoplasm.
• It provides aqueous medium for various biochemical (metabolic) reactions.
• It serves as a temperature stabilizer and helps in maintaining a stable metabolic rate.
• It is an essential input for photosynthesis.
• It helps to maintain turgidity of cells and plant organs.
• It is an excellent solvent for various organic materials of cells.

Water is a very essential component for human civilization, living organisms, and natural habitats. It ma.kes up a major part of plant biomass (about 90% of plant cytoplasm; Singh, 2014). Irrigation, the largest water user sector, is currently under pressure to produce more with higher quality by using limited water to feed the increasing population of the country. The highest proportion of water is consumed by agricultural crops, which is called the blue water footprint, and it is assumed that the water scarcity will increase in the future in view of the changing climate. India has 18% of the world population; however, the water resources are only 4%. Even with all the planning and development, the country has not even been able to provide sufficient drinking water to all at the end of the 20th century. The water sector is facing a number of challenges regarding the availability, accessibility, use, and sustainability of its fresh water resources. Further, the distribution of water in the country is also uneven over space and time. Unfortunately, Rajasthan is the driest state in the country and has been water scarce (with per capita water availability below 1000 m3/year) since 1991. The efficient use of water in agriculture/ horticulture without affecting crop productivity or quality by adopting water saving irrigation techniques is the foremost need. Fruit crops, which have gained commercial attention in recent years, are an important component of Indian agriculture. Due to low irrigation and water use efficiencies, irrigation managers are looking for the introduction of effective water-saving devices and practices for water management in fruit crops.

Water is an extremely essential component in plant growth and development. It is of utmost importance for photosynthesis, cell division, cell growth / elongation, respiration, nutrient uptake, mineral utilization and much other metabolic process, which directly affect the quantity and quality of the produce. Hence quantity and quality of water play a vital role in performance of a crop. A well distributed water supply, throughout the growth of plant is essential. Rainfall is the major source of water for the crops. Rainfall recharges the surface water resources such as rivers, streams and ponds and also the ground water resources like wells.

The following various types of irrigation methods and their systems are used in crop production in greenhouses and plant nurseries.

1.Hand Watering

2.Perimeter Watering System

3.Tube Watering System

4.Drip Irrigation System

5.Overhead Spray System

6.Ebb and Flow System.

The cotton aphid: Aphis gossypii: Aphididae

Symptoms of Damage

Both nymphs and adults cause the damage by sucking the plant sap from shoot tips, pods and leaves. Severe infestation may result in complete drying of affected parts. Attacked leaves curl up, wither and fall. These are yellowish green or brown coloured aphids. The total life cycle from first instar nymph to adult occupies an average of 8-10days. It reproduces parthenogenetically and viviparously. The female may produce 10-30 young ones in a life span of 10-12 days. The nymphs transform into adult in 5-8 days after passing through four moults. 

ABSTRACT

Amajor goal of plant biotechnology is to develop effective and lasting means to reduce crop losses due to stress caused by biological organisms. In Indian context, fungal diseases are rated as the most important factor contributing to yield losses. Although, conventional programmes towards development of disease resistant cultivars have been successful , they suf fer from limitations of human health consequences, potential degradation of environment etc. In this scenario, introduction of specific genes encoding for disease resistance through genetic engineering seems to be a viable alternative. Among the various genes that are induced in response to plant defense, chitinases are the most widely studied and used for development of transgenic crops. Keeping this in view, attempt was made to isolate chitinase genes from four fungal species viz., Trichoderma harzianum, Metarhizum anisopliae, Nomuraea rileyi and Alternaria solani by designing primers based on sequence information available in the database. RT-PCR was done using the RNA isolated from the fungal species using the designed primers. Amplified products were eluted, cloned into pTZ57R vector and sequenced. Characterization of sequenced cDNA was done using the BLAST (x) programme of NCBI site. The amplified product (261 bp) from T. harzianum showed 90 per cent homology to endochitinases from T. asperellum and T. viridae. Using this cDNA, full-length chitinase gene of 1556 bp from T. harzianum could be accomplished through RACE (Rapid amplification of cDNA Ends). In M. anisopliae the amplified product of 1500 bp matched the full length gene of 1500 bp and showed 99 per cent homology to M. anisopliae and 96 per cent homology to M. flavoviride. In other two fungal species, viz., Nomuraea rileyi and Alternaria solani, the amplified products did not show any homology to chitinase gene

INTRODUCTION

Potato plays a vital rolein foodsecurityworldwide. It is the third most important food crop, afterrice and wheat. It is a nutrient-rich crop which provides more calories,vitamins and nutrients per unit area than any otherstaple crops. FAO declared potato as the crop to address future global food security and poverty alleviation during2008. In Indian agriculture, potatoplays a very important role as it alone contributes about 21 percent of the total vegetable area and 26 percent of total vegetable production of India (DAC&FW, 2017a). As per FAOSTAT data for the year 2017,India with48.6 million t is ranked second in potato productionin the world, onlybehind Chinawith 99.2 million t (Figure 1).

1. INTRODUCTION

Organic farming systems can deliver agronomic and environmental benefits both through the structural changes and the tactical daily management of the farming system. The benefits of organic farming systems are relevant both to developing and developed nations which helps for environmental protection, biodiversity enhancement, reduced energy use and CO₂ emissions (Thiyagarajan, et al., 2003). The post Green Revolution era has led to environmental pollution due to excessive use of agrochemicals and fertilizers and thus threatened the fragile ecosystem (Selvaraj et al., 2001). Organic farming conserves soil fertility and curtails soil erosion through implementation of appropriate conservation principles (Thampan, 1995). Organic farming leads to live in harmony with nature.

United Nation experts indicate that organic foods have the good opportunities for developing countries to open a space in the global market. This entails the creation of greater awareness of trade opportunities for organic products as well as of the environmental, economic and social benefits to the public.

Ivy gourd (Coccinia grandis (L.) Voigt), a climbing, herbaceous perennial plant in family Cucurbitaceae, grows well under hot-humid conditions. The genus name is derived from the Latin coccineus, which means scarlet in reference to the fruit color. Thus, it is also called scarlet-fruited gourd. Other vernacular names are: little gourd in English, courge écarlate in French, pepino cimarrón in Spanish, tam leung or phak tam leung in Thai, kundree or kundru in Hindi, pepasan in Malay, hong-gua in Chinese, and tindori in East Africa (Schippers, 2002; MMPND, 2007; USDA, 2007). The plant is often collected wild or cultivated in home gardens in tropical Asia, and its tender shoots are consumed as potherb (Wasantwisut and Viriyapanich, 2003). Bundled tender shoots of ivy gourd in the village market setting are common scenes in Southeast Asia (Boonkerd et al., 1993; Engle et al., 1998). The fruit of its sweet type cultivar is also used widely as a vegetable in India (Ramachandran and Subramaniam, 1983; Sarnaik et al., 2001; Bharathi, 2007). Ivy gourd has a potential to be a valuable vegetable in the tropics to diversify cropping system in peri-urban and urban agriculture, and to improve diet and health, especially where vitamin A deficiency is of developing concern.

Syn.cordifolia Cogn.,C.indica Wight and Arn,Bryonia grandisL. Family.Cucurbitaceae) is an aggressively climbing vine that  spreads quickly over trees, shrubs, fences or other supports. It is also called  scarlet fruited gourd or little gourd. The name is derived from the Latin coccineus, meaning scarlet,in reference to fruit colour (Wagner et al.,1999). Vernacular names are kundru (hindi), kovakka, kova (malayalam), kovakkai, kovai(tamil), thondakayi (kannada), dondakaya (telugu). Coccinia shoot is a good source of calcium, iron, and fiber and has good texture (Anon., 2002). It is grown mostly in homestead farms for tender fruits in almost all regions of the country. It bears fruits almost through out the year where mild winter prevails. In regions where severe winter occurs, it bears fruit for 8-9 months. Although this is considered as a an under utilized vegetable, it is grown extensively in Chattisgarh, West Bengal, Bihar and Karnataka on a commercial scale and giving remunerative returns to  farmers. Availability of better cultivars and knowledge of  many other preparations and uses of this crop can propel its evolution from an under utilized species to an important horticultural crop in Indian Agriculture.

Canavalia ensiformis is a vine that originated in South and Central America and has since spread throughout the tropics and subtropics of the planet. It’s used as a food source, fodder, and a cover crop or green manure. As a minor vegetable crop, jack bean (Canavalia ensiformis), commonly known as horse bean, is extensively dispersed in the tropics and subtropics. Jack bean is a semierect annual herb with a bushy appearance. It is only grown on a small scale in India’s eastern and north-eastern regions. Immature pods and seeds are cooked and eaten like a vegetable. The pods should be cooked in water for 15 minutes before cooking, and then the boiling water should be drained.

The jackfruit tree or jack or simply known as jak (Artocarpus heterophyllus) belongs to the mulberry family (Moraceae) and its fruit, jackfruit, is known as the “poor-man's food” (Bose, 1985; Haq, 2006; Ramanani and Rao, 2001; Rowe-Dutton, 1976; Sonwalkar, 1951; Verheji and Coronel, 1992). It is believed to be native to Southwestern India, Bangladesh, Nepal and Sri Lanka (Answers.com, 2009). It is possibly also native to the Philippines and also East to the Malay Peninsula. The fruit is large, oval and covered with a thick rind that has hexagonal protrusions. Inside the fruit, we find the yellow, fleshy and banana-flavoured carpel or large "bulbs" (which are botanically the perianths) massed among narrow ribbons of thin, tough undeveloped perianths (or perigones), around a central, pithy core. Each bulb encloses a smooth, oval, light-brown coloured "seed" (endocarp) covered by a thin white membrane (exocarp).

Shoot and fruit borer : Diaphania (Margaronia) caesalis :  Pyraustidae

The shoot-and fruit-borer D.caesalis is a major pest of jackfruit in India. The larvae are reddish brown with pale brown head and thin hairs from black warts. The caterpillars bore into the shoots, buds and fruits.  Affected shoots wilt or dry up and the fruits rot and drop. The adult is brown with grey elliptical patterns on the wings.

Origin and history: Jackfruit is a common and popular fruit crop of the low land tropics of eastern and southern parts of India. This fruit tree grows well without much care. It is the largest edible fruit (20-40kg), in Srilanka a fruit of about 120 kg was harvested and created the world record. The fruit is also called as poor man’s food in eastern and southern part. The tree has considerable potential, but it is yet to receive due attention in India it is not generally cultivated in regular plantations and is mainly grown in homestead for domestic uses and as a shade tree in coffee or cardamom plantations. The largest area of jack fruit is in Assam, jack fruit can grow in a wide variety of soil but in grow well in rich, deep alluvial soil.

Jam is prepared by boiling the fruit pulp with required quantity of sugar to thick consistency, firm enough to hold fruit tissues in position. It should contain not less than 68.5 per cent soluble solids. Jam may be made from a single fruit (apple, strawberry, banana, pineapple etc.) or from combination of two or more fruits. Jam contains 0.5-0.6% acid and invert sugar should not be more than 40%.

Jam : It is a product prepared by boiling to a suitable consistency, fruit pulp with sufficient quantity of sugar, acid and pectin so as to set and become firm enough to hold the tissues in position. About 45 parts of pulp are used with every 55 parts of sugar. The finished product should not contain less than 68 per cent total soluble solids.

Jelly : Jelly is prepared by boiling the fruit pectin extract with sugar in the presence of appropriate amounts of acid so as to set into a clear gel. A perfect jelly is transparent, devoid of haziness or any suspended material well set, but not too stiff and should have original flavour of the fruit. When cut it should retain its shape and show a smooth cut surface.

Marmalade : It is a fruit jelly like product in which slices of fruit or peel are suspended in the set gel. Mostly they are prepared from citrus fruits like oranges, lemons etc.