eChapters

Livestock diet or ration may be made up of one or several ingredients depending on the species of animal, their physiological state, source of feed and its nutritional composition, nutritional requirements of the animals and voluntary intake of the feed. Chemical and nutrient composition with each ingredient varies tremendously and no single feed ingredient is complete in its nutrient composition with respect to animal’s requirement.  Therefore, animal feed has to be balanced properly to supply required nutrients in appropriate quantity.  Feed formulation is an art of quantitative application of science of nutrition for the optimum supply of all the essential nutrients through actual feeding of animals. This exercise may be as simple as mixing of few ingredients with simple mathematical calculation or preparation of least cost balanced ration by computer programme.  Since the expenditure on feeding is substantial in livestock production, feed formulation needs special attention of nutritionists or feed technologists. The instruments and equipments used for feed formulation and estimation of micro minerals and ingredients like Feed grinder and mixer of capacity 75 kg, Fibertech for fiber estimation, Hammer mill-particle size reduction, Mixer and grinder for feed and fodder (complete feed preparation) of capacity 250 kg, Roughage processing-Chaff cutter, Soxhtech for fat estimation, UV-vis-Spectrophotometer and Voltameter for micro mineral estimation are shown in Fig. 3.1 to 3.8.

Nutrition is the key factor affecting the production as well as the reproduction efficiency in all the animals therefore proper and balanced nutrition is the prerequisite to attain and utilize the full reproductive potential of the animals. All the nutrients like energy, protein, minerals and vitamins need to be properly balanced in the diet of animals. Energy and protein are the major nutrients required in the greatest amounts and should be in the topmost priority in order to optimize reproduction. Although minerals and vitamins are required in low amount, but very much essential as a cofactor and coenzymes in the reproductive process of the animals and deficiency of these nutrients might affect the overall reproductive efficiency of the animals.

Buffaloes, though have great production potential, do suffer with many reproductive problems viz.  delayed age of puberty and  sexual maturity, weak / silent estrus, longer inter-calving period,  seasonality in breeding, poor libido  and poor semen quality. Little information is available about the buffaloes as compared to cattle because all the time we try to apply the knowledge available about the cattle to the buffalo.  Some comparative reproductive parameters in cow & she buffalo & cow bull and buffalo bull are depicted in Table 8. 1 and Table 8.2 respectively.

6.1    Introduction
    
6.2    Fertilizers in Drip Fertigation
    
6.3    Drip Fertigation Systems
    
6.4    Rate of Fertilizer Application
    Questions and Problems
        
References

INTRODUCTION

Fig  (Ficus carica L.) is commonly known as Anjeer. It has a luscious taste as a fresh fruit. The fruit of fig have been prized over centuries for the medicinal and dietary properties. The figs are consumed fresh, dried, preserved, candied, jam and canned. 

NUTRITIVE AND CULTURAL SIGNIFICANCE

Medicinal Uses:The latex is widely applied on warts, skin ulcers and sores, and taken as a purgative and vermifuge, but with considerable risk. In Latin America, figs are much employed as folk remedies. A decoction of the fruits is gargled to relieve sore throat. Figs boiled in milk are repeatedly packed against swollen gums. Similarly, the fruits are much used as poultices on tumors and other abnormal growths. The leaf decoction is taken as a remedy for diabetes and calcifications in the kidneys and liver. Fresh and dried figs have long been appreciated for their laxative action. The food value of edible portion of fig (Morton, 1997) is given in detail in Table 1. 

Motif

1.    A nucleotide/amino acid sequence pattern having biological significance.

2.    Occurs repeatedly, either in same molecule or in many molecules. Found in upstream intergenic region.

3.    Functionally important regions of genome (gene) can be recognized by searching such patterns.

4.    Used for locating binding sites, regulatory signals, to control gene expression.

5.    Identifying potential drug target sites.

15.1. INTRODUCTION

Finger millet Eleusine indica (L.) is an Old World cereal grass commonly known as ‘finger millet’, is one of the staple food crop especially in India and Africa, which is widely grown in the arid regions of Asia and Africa and important minor millet grown in India.  Eleusine, the generic name, is obtained after the “Eleusine” the Greek Goddess of cereals and the common name finger millet is derived from the finger like branching of the panicle. It is also know by Goosegrass, Yardgrass, Wiregrass, Silver Crabgrass, Crowfoot Grass. It is commonly known as Finger millet in English, Kelvaragu in Tamil, Nachani in Marathi etc. Some Indian varieties of finger millet are Kempu ragi, Ragalli shivalli, Pichakaddi etc.  This crop is one among the hardiest crops which can with stand severe drought conditions and can also grow well under scanty rainfall condition. However with good irrigation facilities the yield of finger millet matches with crops like rice. Finger millet seeds remain free of pests and insects for a long duration extending up to 50 years hence serving as a food reserve in case of tough situations like famine.

    
1.    Introduction
    
2.    Containers
    2.1     Materials used for forming containers
    2.2    Types of cans
    2.3    Labeling and coding
    2.4    Can seam
    
3.    Microbilogical Aspects
    3.1     Organisms associated with non acid foods
    3.2     Heat resistance of bacteria
    3.3     Logarithmic order of destruction
    3.4     Thermal death time curve
    3.5     Determination of TDT and survivor number
    3.6     F-value
    3.7    12 D concept
    
4.    Heat Penetration Aspects
    4.1    Factors that influence heat penetration
    4.2    Measurement of cold spot temperature
    
5.    Thermal Process Calculation
    5.1    General method
    5.2    Formula method
    
6    Inoculated Pack Studies

7.    Effect of Thermal Processing on Food Quality
    7.1    Cook value
    
8.    Steps of Canning Fish
        
    8.1    Handling raw material
    8.2    Dressing and size cutting
    8.3    Salt treatment
    8.4    Precooking
    8.5    Smoking
    8.6    Packing/ Filling
    8.7    Exhausting and seaming
    8.8     Retorting and cooling
    8.9    Inspection and storage

References

1.       Introduction

2.    Lipid Storage in Fish
    
3.      Factors Influencing Nature of Lipids in Fish
    
4.    Composition of Fish Oils
    4.1    Nature and composition of fatty acids
    4.2     Triacyl glycerols
    4.3     Phospholipids
    4.4     Diacyl glycerol ethers
    4.5     Wax esters
    4.6     Hydrocarbons
    4.7     Sterols
    
5.    Autoxidation of Fish Lipids
        
    5.1    Mechanism of autoxidation
        
    5.2     Factors influencing lipid autoxidation
        
    5.3     Control and prevention of autoxidation
    
6.    Lipid Autolysis
    
7.    Rancidity Problem in Fish
    7.1     Indices of oxidative rancidity
    
References

1.    Introduction
    
2.    Structure of Protein
    2.1     Primary structure
    2.2     Secondary structure
    2.3     Turns and Bends in the Polypeptide Backbone
    2.4     Tertiary structure
    2.5     Quaternary structure
    
3.    Protein Denaturation
    
4.    Conditions Affecting Protein Structure
    
5.    Fish Proteins
    5.1    Sarcoplasmic proteins
    5.2    Myofbrillar protein
    5.3    Stroma proteins
    5.4    Functional properties of fish proteins
    
References
    
Further reading

Appendix-'A'    :    Standard Operating Procedure for Administration
    
Appendix-'B'    :    Standard Operating Procedure for Individuals
    
Case Study    :    Assam Floods 2004
        :    Peerchu Lake - A Disaster

A. General
        
B. Bulbous Plants
        
C. Greenhouse Technology
        
D. Plant Breeding
        
E. Plant Physiology
        
F. Plant Tissue Culture and Biotechnology
        
G. Post Harvest Technology

1.    World Export/Import of Ornamental Plants
    
2.    Recent Trends
    
3.    Flower Auctions
    
4.    Domestic Trade of Flowers
    
5.    Marketing Channels and Price Spread in Traditional Flowers
    
6.    E-commerce in Floriculture
    
7.    On-line Information Systems Dealing with e-floriculture
    
8.    Flower Auctions
    
9.    Floriculture and WTO
    
10.    Documentation Indexing
        
    Further reading.

Fluid therapy plays an important role in emergency and critical care of  the malnourished, anemic, unhealthy and debilitated animals and as a supportive therapy in various disease conditions, accidents etc. The type, rate and quantity of fluids indicated for common abnormal conditions  in various animals are dealt in brief in  the following chapter.

1    Suggested fodder species for different regions

2    Package of practices for cultivated fodder crops

3    Estimation of agricultural by-products

The demand for agricultural and livestock products is rising and the challenge to feed 8 billion people in 2020 is considerably enormous. Further, it is also hard to imagine meeting 2050-projected demand by raising twice as many poultry, 78% more small ruminants, 58% more cattle and 37% more pigs, without further damaging natural resources (Rivera and Lopez, 2012). Hence, sustainable development based on balance of ecology, economics, norms and values are to be considered at various levels of the scale: between food and farming systems, regions, nations and continents (Zipp, 2003). The food systems encompass activities related to the production, processing, distribution, preparation and consumption of food; and the outcomes of these activities contributing to food security (Fig. 14.1).The interactions between and within bio-geo-physical and human environments influence both the activities and the outcomes.

Introduction

Forests face many hazards but most common is forest fire. They pose threat to not only forest wealth but also to entire region of fauna and flora seriously disturbing the bio-diversity, ecology and environment of a region. During summer, forests are littered with dry senescent leaves and twigs which could burst into flames ignited by the slightest spark. Forest cover in India is 675,538 km and constitute 20-25% of geographical area.

1. Introduction

Okara is a by-product generated during processing soybean into soymilk or tofu. Okara is rich in fibre and protein. It contains most of the carbohydrates, some of the protein and a small portion of the oil from soybeans. Okara contains approximately 50% fibre, 27% protein, and 10% fat on dry basis (Li et al., 2012). About 1. 2 kg of fresh okara is produced from every kilogram of soybean processed for soymilk (Vishwanathan et al., 2011). Fresh okara from soymilk production has about 80% moisture. The protein present in okara has good nutritional quality and superior protein efficiency ratio. Other soy components that are also likely present in okara include isoflavones (genistein and daidzein), lignans, phytosterols, coumestans, saponins, and phytates (Li et al., 2012). The most common method of utilization of okara is in the form of animal feed. Tofu or soymilk processing plants primarily dump okara as landfill or resort to burning. Okara can be utilized as a fertilizer as it contains various nutrients required for growth of plants. It can be used as a fermentation substrate for production of ethanol. Okara can also be used in pet foods as it contains high levels of extenders and protein. Apart from these, okara can be used in a variety of food products. It can be used in various food products. Utilization of okara is still in the initial stage. It can be used as a replacement of wheat flour in baked products. It can also be used in various soups, salads or vegetable preparations.

Resistant starch refers to the portion of starch and starch products that resist digestion as they pass through the gastrointestinal tract. Resistant starch is the fraction of starch which is not hydrolysed to D-glucose in the small intestine within 120 min of being consumed, but which is fermented in the colon. It can be used as a functional ingredient in various food formulations (Fuentes-Zaragoza et al., 2010). RS has desirable physicochemical properties (Fausto et al., 1997) such as swelling, viscosity increase, gel formation and water-binding capacity, making it useful in a variety of foods. It helps in improving the appearance, texture, and mouthfeel of the final product compared to conventional fibres. Resistant starch can act as a prebiotic for gut microflora (Sajilata et al., 2006). It has hypocholesterolemic effects, is hypoglycaemic and prevents gall stone formation.

INTRODUCTION

The climate of India is favourable for production of a variety of tropical, subtropical and temperate fruits. The area under cultivation, production and productivity of fruit crops has increased significantly during the last fifteen years. Horticulture has emerged as major area of growth in the agricultural sector and has out performed other crops with respect to production and productivity. The increase in fruit production was improved considerably from 43.0 million tonnes in 2001-02 to 91.4 million tonnes in 2015-16 (Table 1). This increase in production has come from an increase in area under different fruit crops and overall increase in productivity. In this way, India has maintained its second rank in global production of fruits next only to China. The fruit area increased from 4 million hectares in 2001-02 to 6.4 million hectares in 2015-16. On the basis of fruit production, it is estimated that per capita fruits availability in India 190 g per day which is still less than the recommended quantity of 230 g per capita per day.